establishment: unplug reaps like death, so a replug rebinds

The hot-unplug path (onChildRemoved, a report from a live bus) cleared the
child but left the bound class driver: a process blocked on reports that
will never come, whose stale entry made the matcher's dedupe refuse the
respawn when the device was plugged back in — the same wall the restart
zombie hit, one path over. Unplug now reaps exactly like reporter death.

The usb-hub-unplug case grows the replug: device_del the hub keyboard, then
device_add it back (qmp_sequence); the ordered tail — child removed, reaping,
delegated, ok — can only be satisfied by the second generation, since every
boot keyboard's ok precedes the unplug. Discrimination: without the reap the
replug never rebinds and the case times out (verified by stash run). Hub
family, restart drill, and the two-controller proof all green (8/8).

system/services/device-manager/device-manager.zig

@@ -706,6 +706,12 @@ fn onChildRemoved(_: void, invocation: Invocation(device_manager_protocol.ChildR
     for (&children) |*child| {
         if (child.used and child.parent == report.parent and child.bus_address == report.bus_address and child.reporter == invocation.sender) {
             std.log.info("child removed (device {d} port {d})", .{ child.parent, child.bus_address });
+            // Unplug reaps exactly like reporter death (pruneChildrenOf): the
+            // bound driver's device is gone and it cannot observe that — it
+            // blocks on reports that will never come — and its stale entry
+            // would make the dedupe refuse the respawn when the device is
+            // PLUGGED BACK IN. Reap now, and a replug's re-report rebinds.
+            reapDriverBoundTo(child.device_id);
             child.used = false;
             status = 0;
         }

test/qemu_test.py

@@ -955,10 +955,16 @@ CASES = [
      "expect": r"(?s)(?=.*hub slot \d+ port \d+ device:.*0x0409)"
                r"(?=.*usb-hid-keyboard: ok \(device 3)",
      "fail":   r"DANOS-TEST-RESULT: FAIL"},
-    # Hub-downstream disconnect (B4c): device_del the keyboard behind the hub;
+    # Hub-downstream disconnect AND replug (B4c + establishment): device_del the
-    # the hub's status-change endpoint reports it, the device is torn down
+    # keyboard behind the hub — the hub's status-change endpoint reports it, the
-    # (ChildRemoved + Disable Slot). QEMU's hub DOES raise downstream changes
+    # device is torn down (ChildRemoved + Disable Slot), and the manager REAPS
-    # (unlike root-port hot-plug).
+    # the bound class driver (it blocks on reports that will never come, and its
+    # stale entry would make the dedupe refuse the respawn). Then device_add
+    # plugs it back: the re-report re-registers the same identity and the
+    # matcher spawns a fresh driver, which binds — the ordered tail (reaping →
+    # child removed → delegated → ok) can only be satisfied by the SECOND
+    # generation, since the boot keyboards' ok lines all precede the unplug.
+    # QEMU's hub DOES raise downstream changes (unlike root-port hot-plug).
     {"name": "usb-hub-unplug",
      "build_case": "usb-hid",
      "smp":    4,
@@ -966,9 +972,17 @@ CASES = [
      "qemu_extra": ["-device", "qemu-xhci,id=xhci2",
                     "-device", "usb-hub,bus=xhci2.0,port=1",
                     "-device", "usb-kbd,bus=xhci2.0,port=1.1,id=dkbd"],
-     "qmp_after": {"delay": 8, "command": "device_del", "arguments": {"id": "dkbd"}},
+     "qmp_sequence": [
+         {"delay": 8,  "command": "device_del", "arguments": {"id": "dkbd"}},
+         {"delay": 14, "command": "device_add",
+          "arguments": {"driver": "usb-kbd", "bus": "xhci2.0", "port": "1.1", "id": "dkbd2"}},
+     ],
      "expect": r"(?s)(?=.*usb-hid-keyboard: ok \(device 3)"
-               r"(?=.*slot \d+ disconnected)",
+               r"(?=.*slot \d+ disconnected"
+               r"[\s\S]*device-manager: child removed"
+               r"[\s\S]*device-manager: reaping \S*usb-hid-keyboard"
+               r"[\s\S]*device-manager: delegated device \d+ to /system/drivers/usb-hid-keyboard"
+               r"[\s\S]*usb-hid-keyboard: ok)",
      "fail":   r"DANOS-TEST-RESULT: FAIL"},
     # The kernel VFS root (M-F): the mount table serves the initrd at /system —
     # path resolution, node status/read (an ELF magic), and directory listing,