reorg: begin library/protocol/ — move block + usb-transfer

Start the protocol tree: wire protocols move to library/protocol/<name>/,
entry file <name>-protocol.zig, module name unchanged. block and usb-transfer
are pure moves — every consumer already imports them by module name, so only
the b.addModule paths change and the empty system/services/block/ is removed.

  block-protocol         -> library/protocol/block/block-protocol.zig
  usb-transfer-protocol  -> library/protocol/usb-transfer/usb-transfer-protocol.zig

zig build + test green.

library/protocol/block/block-protocol.zig

@@ -0,0 +1,44 @@
+//! The block-device wire protocol — what a filesystem (the FAT server) says to a
+//! block driver (usb-storage) over its well-known `.block` endpoint. A protocol
+//! module like vfs-protocol / usb-transfer-protocol: extern-struct messages, an
+//! `Operation` tag, everything in one IPC message.
+//!
+//! Data path: read and write move whole blocks to or from a **caller-owned DMA
+//! buffer**, named by its physical address — the same physical-address handoff
+//! usb-storage already uses toward the controller, one layer up. So a 512-byte
+//! sector never has to cross the 256-byte IPC boundary; only the small request /
+//! reply headers do. (Safe while the IOMMU is unenforced; see docs/driver-model.md.)
+
+pub const Operation = enum(u32) {
+    /// geometry() -> { block_size, block_count }
+    geometry = 0,
+    /// read(lba, count, physical): read `count` blocks from `lba` into the buffer
+    read = 1,
+    /// write(lba, count, physical): write `count` blocks at `lba` from the buffer
+    write = 2,
+    /// flush(): commit any device write cache to stable media (no data transfer).
+    /// A filesystem calls this to make prior writes durable — e.g. before power-off,
+    /// so a shutdown-time write isn't lost in the USB flash controller's cache.
+    flush = 3,
+};
+
+pub const Request = extern struct {
+    operation: u32,
+    reserved: u32 = 0,
+    lba: u64,
+    count: u32, // number of blocks (read/write)
+    reserved2: u32 = 0,
+    physical: u64, // caller's DMA buffer physical address (read/write)
+};
+
+pub const Reply = extern struct {
+    status: i32, // 0 on success, negative on failure
+    reserved: u32 = 0,
+    block_size: u32, // geometry: bytes per block (512)
+    reserved2: u32 = 0,
+    block_count: u64, // geometry: total blocks; read/write: blocks moved
+};
+
+pub const message_maximum: usize = 256;
+pub const request_size: usize = @sizeOf(Request);
+pub const reply_size: usize = @sizeOf(Reply);