Signals are statements delivered as coalescing notifications to the
endpoint a process nominates with signal_bind — never a hijacked stack,
never a question (liveness is the zero-length ping the harness answers).
process_signal is supervisor-or-self gated, like kill; unbound targets
accumulate a pending mask delivered on bind. timer_bind is the missing
timed wait: a one-shot deadline landing in the same replyWait as
everything else — what stop(), hello deadlines, and restart backoff are
built from. runtime.service.run folds requests, signals, and
notifications into callbacks; the VFS conversion deletes its hand-rolled
loop and gains the whole lifecycle contract. The signals scenario drives
ping, reload, terminate->exited, the timer, and the deaf-child
deadline->killed path from ring 3. docs/process-lifecycle.md increments
1-4 are now as-built.
process_subscribe adds an endpoint to a bounded, ref-counted subscriber
table; every death posts the same badge encoding a supervisor's exit
notification uses, equally late, so subscribers observe a fully-released
child. A dying subscriber's own subscriptions are removed first — it never
hears about itself. The VFS is the first subscriber: open handles now
record their owner and are swept when the owner dies, because a service
must never depend on clients cleaning up after themselves
(docs/process-lifecycle.md). Proven by the vfs-client-death scenario.
The kernel records an ExitReason at all three death sites — clean exit,
fault (classified by vector), and process_kill — into a bounded ring
before the exit notification posts, so a supervisor's query never races
the notice. process_exit_reason is gated by the same supervisor check as
kill; runtime.process.exitReason is the stable interface. This is the
input restart policy reads (docs/process-lifecycle.md iron rule 2).
Every path out of a process (exit, fault, kill) now releases its device
claims alongside its IRQ and MSI bindings, so a restarted driver can claim
its hardware again — the cleanup half of process-lifecycle.md's iron rule 1.
MSI vectors were already swept by irq.releaseOwner; claims were the gap.
The claim-release test proves kill -> release -> re-claim, plus the broker
release in isolation.
Programs can now subscribe to keyboard events (key_down/key_up/key_press)
and drivers can broadcast them, through a new user-space input service.
The delivery model is forced by danos IPC: a synchronous rendezvous holds
one pending reply, so a server cannot park N subscribers blocked in a
"wait for next event" call — delivery must be push. But a synchronous push
has no timeout and the kernel never wakes a sender parked on a dead peer's
endpoint, so one dying subscriber would hang all input. So this lands the
roadmap's planned asynchronous buffered send and builds the service on it:
- ipc_send (syscall 26): non-blocking post to an endpoint's bounded payload
ring, delivered through reply_wait as a buffered message (notify_message_bit).
A full ring drops the oldest. It can never hang on a dead/slow peer.
- input-protocol + runtime.input helpers (subscribe/next, connectSource/
publish) — the first real consumer of M13 capability passing: a subscriber
hands the service its own endpoint as a capability.
- input service (fan-out via ipc_send, dead-subscriber pruning), a synthetic
input-source, and input-test; the ps2-bus keyboard driver publishes to it.
Real IRQ1 scancode decoding (which must live in the bus, the PNP0303 owner)
is a documented follow-up; the source is synthetic for now.
- build/init wiring, an `input` QEMU case, and docs/input.md.
Full QEMU suite 48/48, including the new input case and every IPC/endpoint
regression (ipc, ipc-call, ipc-cap, vfs, hpet, bus, irqfree).
process_enumerate snapshots the task table (the device_enumerate shape, so
ps is a user program); system_spawn returns the child id, records the caller
as supervisor, and takes an exit endpoint; process_kill is allowed only for
the supervisor. Every death — exit, fault, or kill — posts a child-exit badge
to that endpoint (the IRQ-as-IPC pattern as SIGCHLD). A target caught off-CPU
is reaped in place; a running one is condemned and finished at its next
system call or tick, guarded so teardown never lands mid-kernel-operation.
Tested by process-list, process-kill, and supervision (a ring-3 supervisor
exercising the whole surface); design notes in docs/process-management.md.
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.
The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).
Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
A CPU exception raised in ring 3 by a scheduled process now kills that
process - IRQ bindings, IPC handles, and address space reclaimed, a
client it owed a reply to failed with the new -EPEER instead of hung -
and the core reschedules (docs/resilience.md step 2). Kernel-mode
faults, NMI, double fault, and machine check stay terminal, as does the
borrowed-thread isolation probe. Proven by the new fault-recovery QEMU
test: init keeps heartbeating after a process page-faults to death.
Ring 3 still has no direct in/out (no TSS I/O bitmap, IOPL never raised — a #GP), but a
driver no longer needs it: io_read(device_id, resource_index, offset, width) and
io_write(..., value) grant port access the same way mmio_map grants memory. The claim
plus the device's discovered io_port resource are the capability — resolveIoPort checks
the device is claimed by the caller, the resource is io_port, and [offset, offset+width)
stays inside it, then issues the in/out via architecture.pioRead/pioWrite. So a PS/2 or
16550 driver is now writable; the low-rate legacy hardware that needs port I/O is fine
with a syscall per access. io_port resources were recorded by discovery and ignored —
now they're used. Runtime: device.ioRead/ioWrite.
New `ioport` test claims QEMU's PS/2 controller (io_port 0x64, discovered via ACPI) and
checks the gate admits an in-range access, refuses over-wide / out-of-range / unclaimed,
and that the kernel actually reads the status port (0x1c). Suite 41/41 plus host tests.
Docs refreshed for the whole M13-M16 + port-I/O reality: drivers.md "Limits" no longer
lists port I/O, DMA memory, or barriers as missing (they exist) and its "what's next"
reflects that; the FSH doc's character-device and block-device sections are corrected
("cannot host a block driver at all" is no longer true — writable now, not yet memory-
safe pending IOMMU enforcement); device-interrupts.md unblocks the keyboard and narrows
the interrupt gap to MSI-X.
Two parts, both blockers for real PCI drivers.
ECAM config space per function: enumeratePci now gives every pci_device its own 4 KiB
configuration window as resource 0. A claimed PCI driver mmio_maps that to reach its
command register, BARs, and — the point — its capability list (MSI/MSI-X, PCIe extended
caps), with no new syscall. Verified in the discovery test (QEMU q35's functions each
carry it).
MSI: msi_bind(device_id, endpoint) -> address (rax), data (rdx) allocates a per-device
edge-triggered vector, binds it to the endpoint, and returns the (address, data) the
driver programs into its own MSI capability. Unlike irq_bind there's no GSI, no I/O APIC
entry, no sharing, and no ack cycle — dispatch recognises an MSI vector (vector_gsi ==
none, msi_bound set), EOIs, and notifies. Owner-keyed release drops the binding on exit.
Legacy INTx (_PRT parsing + shared lines) is deliberately skipped; MSI is the real
answer.
QEMU's HPET has no MSI, so the new `msi` test proves the vector-routing path with a
self-IPI (new apic.selfIpi) standing in for the device's MSI write: bind a vector,
fire it, the bound endpoint is notified. The msi_bind syscall wraps irq.msiBind with
the claim check and lands its first real use with the first PCI driver. Suite 39/39
plus host tests.
An HCD programs a bus-master engine: it needs a descriptor ring that is physically
contiguous, at a physical address it knows, uncacheable, and pinned. mmap gives none
of those. Add dma_alloc(len, flags) -> vaddr (rax), paddr (rdx) and dma_free(vaddr,
len): grant contiguous, zeroed, pinned, strong-uncacheable memory in a per-process DMA
arena (PML4[228]) and hand back both addresses.
Pieces: pmm.allocContiguous(count, max_phys) finds a run of contiguous free frames
below a cap (dma_below_4g for 32-bit engines); mapUserDmaInto maps them uncacheable
(PCD|PWT) but WITHOUT device_grant, so unlike an MMIO grant these frames are real RAM
and freeSubtree returns them on teardown — a driver that dies leaks nothing. dma_free
is bounded to the DMA arena so it can never unmap the caller's stack/heap/MMIO.
dma_write_combining is accepted but falls back to coherent (WC needs PAT programming).
Runtime: runtime.dma.alloc/free (a two-return-value stub, like replyWait). New `dma`
kernel test drives the mechanism directly — contiguity, the below-4G cap, coherent
mapping, and reclaim-on-teardown (no leak). The thin syscall wrappers follow the tested
mmap/mmio_map shape and land their first real use with the first DMA driver. Suite
38/38 plus host tests.
ipc_call and ipc_reply_wait grow a `send_cap` argument (r9) and a `received_cap`
return (r8): an endpoint travels alongside a message, installed into the receiver's
handle table. The transfer is a share, not a move — the endpoint's refcount is bumped
and the sender keeps its handle. If the receiver's table is full the call fails
-ENOSPC and the message is NOT delivered (a half-delivered capability is worse than a
failed send); a bad handle fails -EBADF. Both directions carry a cap: a client's call
hands one to the server (seen in the server's replyWait), and the server's reply hands
one back (seen in the client's call return).
This is the "open" primitive the driver model was blocked on: a bus driver mints a
per-device endpoint and hands it to a class driver, giving it a private channel to one
device without the 8-slot global name registry.
Kernel: shareCapability in ipc-synchronous.zig at both copy points; new
setSystemCallResult3 (r8, saved/restored by the syscall stub); Task gains
ipc_send_cap / ipc_received_cap. Runtime: callCap + Reply, replyWait gains send_cap
and Received.cap; plain call/replyWait delegate with no_cap. New abi.no_cap.
New ipc-cap test (two kernel tasks exercise both directions, each verifying the
endpoint it received is the same object shared, refcount bumped to 2). No class driver
consumes callCap yet — it lands with the first one. Suite 37/37 plus host tests.
Add a `system_spawn(name)` system call: the kernel loads a binary bundled in the
initial-ramdisk, by name, as a fresh ring-3 process. It's the mechanism a user-space
supervisor needs — discovery and policy stay in user space, the kernel only spawns.
The kernel already holds the initial-ramdisk image from the boot handoff; it now
stashes it (process.setInitialRamdisk) so the handler can resolve names, bounds-checks
the name into the user half like debug_write, and returns -1 for an unknown name or a
load failure. Ungated for now (any process may spawn any bundled binary); a spawn
capability belongs here once the model grows one.
The device manager stops logging "would spawn it" and calls runtime.system.spawn on
its matched driver. On QEMU it discovers the HPET, matches `hpet`, and spawns it — and
the driver comes all the way up (claims the timer, maps its MMIO, binds and services
its IRQ, prints "hpet: ok"). The device-manager test now keys on that final marker:
since only the manager is spawned, `hpet: ok` appearing proves the whole
discover -> match -> system_spawn -> driver-up chain end to end.
Transitional: the kernel still auto-spawns the whole initial-ramdisk at boot, so a
real boot briefly double-spawns hpet (the second claim fails harmlessly). Increment 3
removes that redundancy so the manager is the sole owner of driver spawning. Suite
36/36 plus host tests.
The reorg moved user binaries under /system (init -> /system/services/init,
drivers -> /system/drivers/<name>, vfs-test -> /system/services/vfs/vfs-test), but
many comments and log strings still named the old /sbin/ home. Retarget them all:
kernel/loader/test comments and the two boot log lines, plus vision.md and the
driver-model.md proposed tree (also dropped the stale `d` suffixes and rt->runtime
there). The initial-ramdisk spawn log no longer fakes a /sbin/ prefix, since those
binaries live in different homes (services vs drivers).
Left the FSH design doc's /sbin and /lib rows alone — whether /sbin stays a
directory at all is a design call for its owner, not a stale-comment fix.
The `system` module (formerly `danos`) had become a grab-bag: it held the
loader<->kernel handoff *and* the kernel<->user ABI *and* the device wire types, in
one module three different audiences imported. Usage proved the seam — the
bootloader never touched the syscall/device ABI, and user space never touched the
boot handoff — so split it by audience, one module per contract:
system/boot-handoff.zig loader <-> kernel: BootInformation, Framebuffer,
MemoryMap, the VM layout + physicalToVirtual, kernel_abi
system/abi.zig kernel <-> user, core: SystemCall, mmap prot flags,
page_size, notify_badge_bit, ServiceId
system/devices/device-abi.zig kernel <-> user, devices: DeviceDescriptor,
DeviceClass, ResourceDescriptor, ResourceKind, ...
device-abi is the devices sub-project's public interface, exposed as its own module
the way vfs exposes vfs-protocol — importable by user space, unlike the
kernel-internal device model it also feeds. That collapses a real duplication:
DeviceClass and ResourceKind were defined twice (device-model.zig and the contract,
kept "in sync by hand"); device-model now re-exports them from device-abi, so the
enum a driver matches on and the one the kernel classifies with are one type.
Each import now declares which contract it speaks: the bootloader imports only
boot-handoff; a driver only abi + device-abi (via the runtime); the kernel all
three. This also retires the `system` / `runtime.system` name overlap. page_size
lands in abi (it's part of the mmap contract user space aligns to); the bootloader
keeps its own local 4 KiB constant so it depends on nothing but the handoff.
All 21 importers rewired, docs updated to keep /system mapping to source. Build,
host tests, and the QEMU suite (36/36) all green.
The shared kernel<->user ABI contract (BootInformation, the SystemCall numbers,
DeviceDescriptor, page_size, ...) is now the `system` module at
system/system.zig, following the convention that a directory's root file takes
the directory's name.
One overlap to note: the runtime's syscall wrappers are already `runtime.system`,
so the single file that uses both the contract and those wrappers
(library/runtime/heap.zig) aliases the wrappers locally as `system_calls`. The
two are distinct (top-level `system` vs `runtime.system`); everywhere else the
contract is just `system`.
Also: the QEMU run's serial capture now lands in the FHS log location,
zig-out/var/log/system/serial0-<timestamp>.log — a stand-in for the kernel's own
logging system, which will eventually write there itself.
Suite 35/35 plus host tests green.
Follow-up to the monorepo re-org. Suite 35/35 plus host tests green.
POSIX compatibility is now its own library, library/posix/ (unistd, stdio),
layered strictly over the runtime — it calls the runtime's IPC/heap, never
system calls directly. The runtime is now POSIX-free (the danos-native
application ABI). The VFS wire protocol is danos-native throughout
(Stat -> FileStatus, .stat -> .status, O_CREAT -> create); the POSIX layer
maps the POSIX spellings at the boundary. The coding standard's ABI-name
exception is scoped to one place: a file is allowed POSIX spellings only if it
lives under library/posix/ — everywhere else, danos naming with no exception.
Naming fixes, all mechanical:
- initrd -> initial-ramdisk: the source file, the module, the tool
(make-initial-ramdisk.py), the artifact (initial-ramdisk.img, including the
bootloader's load path), and the identifiers.
- system/kernel/device-service.zig -> devices-broker.zig: it is ring-0 kernel
code (the trusted device table + claim capability), not a ring-3 service. The
future user-space device *manager* (policy) will live in system/services/.
- Dropped the daemon `d` suffix: hpetd -> hpet, busd -> bus. A driver lives in
system/drivers/, so the folder already says what it is; encoding the role in
the name too is redundant. The coding standard drops that exception.
- system/devices/aml/interp.zig -> interpreter.zig (the type was already
Interpreter).
The source layout now mirrors the runtime filesystem hierarchy
(docs/danos-file-system-hierarchy-FSH.md): what lives under system/ in the
source is what a running danos represents under /system. Each service and
driver is a sub-project directory that is its own Zig module — cross-project
references go by module name, never by a path into another project's files.
Moves (all git mv, history preserved):
- src/ -> system/ (danos internals; the self-representation)
root.zig -> danos.zig (the kernel<->user contract module)
kernel/arch/ -> kernel/architecture/ (arch -> architecture)
device/ -> devices/ (what /system/devices reflects)
boot/ -> /boot (the loaders, top level)
- sbin/ -> split by role:
init, vfs -> system/services/<name>/<name>.zig
hpetd, busd -> system/drivers/<name>/<name>.zig
vfs-test -> system/services/vfs/vfs-test.zig (inside the vfs project)
- lib/ -> library/runtime/ (room for other libraries beside runtime)
The VFS wire protocol becomes its own module, system/services/vfs/protocol.zig
("vfs-protocol"): the vfs sub-project exposes its interface, and the runtime's
file layer imports it by name. First instance of the "protocol module" pattern
(docs/driver-model.md); usb/block will expose theirs the same way.
Also: fix a naming-standard violation in the protocol — Op -> Operation (and
req -> request, _pad -> _padding). Docs updated: /system/services added to the
FHS doc, a repository-layout section added to the docs index, and stale source
paths swept across comments and docs.
Runtime boot paths are unchanged (the bootloader still loads /sbin/init);
aligning the runtime filesystem to the FHS is a separate follow-up. Suite 35/35
plus host tests green.
Daniel Samson