Completes Phase 2: the FAT filesystem now stamps and reports a real modification
time, built on the Phase 2d(i) kernel wall-clock. This is the last stat field the
compiler's build cache needs to reason about (source vs cached output).
- on-disk.zig: fatToEpoch / epochToFatDateTime convert between the two 16-bit DOS
date/time fields and Unix epoch seconds (UTC — FAT has no timezone). Host-tested
round-trip + an absolute check (1577836800 == 2020-01-01).
- engine: a settable current_time_epoch that create/write stamp into the entry's
write (and creation) date/time; Node/Listing gained an mtime decoded from those
fields on read. Host test: a create stamps the mtime, read back through resolve
and listEntry.
- vfs protocol FileStatus + runtime.fs.Attributes gained an mtime field; the fat
server sets current_time_epoch from runtime.system.wallClock() per request and
returns mtime from stat. The flat ramfs reports 0 (it has no timestamps).
- fat-test reads the created file's mtime through stat and checks it is a real
current time, behind a new `fat-mtime` QEMU case.
Verified against the host: the guest stamped mtime 1783971676 while the host clock
was 1783971680 (boot+test lag) — the file's mtime is real current time. zig build,
zig build test (the epoch<->DOS conversions + the engine mtime test),
zig build check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations,
fat-rename, fat-mtime, vfs, vfs-client-death, log-flush, orderly-shutdown,
initial-ramdisk, smoke, wall-clock, usb-storage — all green. mode/inode remain.
Completes the Phase 2 FAT mutation set (truncate, mkdir, unlink, rename).
- engine: rename(dir, old_name, new_name) rewrites an existing entry's 8.3 name in
place within the same directory. Refuses a missing source, a non-8.3 target, or a
name that already exists; drops any long-name entries on the old file (it takes
its new 8.3 name), LFN-aware like removeFile. Cross-directory and long-name-
preserving rename are noted limitations. Host-tested (rename keeps contents;
collision, non-8.3, and missing-source are refused).
- vfs protocol: a `rename` operation whose payload is old-path, a 0x00 separator,
then new-path.
- VFS router: a forwardRename helper + a `.rename` case that requires both paths
under the same mount (cross-filesystem rename is refused) and forwards the
mount-relative old+new.
- fat server: a `.rename` handler that requires the same parent directory and calls
engine.rename.
- runtime.fs: rename(old_path, new_path).
- fat-test now renames the file it created (before removing it) and asserts the old
name is gone, behind a new `fat-rename` QEMU case.
Verified: zig build, zig build test (the engine rename unit test), zig build
check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations, fat-rename,
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The engine gained mkdir/unlink in Phase 2a; this exposes them as first-class
filesystem operations so programs can use them.
- vfs protocol: two new path-based operations, mkdir and unlink (appended, so
existing opcodes/offsets are unchanged).
- VFS router: a forwardPath helper relays a path-based op under a mount to its
backend; the mkdir/unlink cases forward to the mounted filesystem (the flat
ramfs refuses them — it has no directories).
- fat server: mkdir -> engine.createDirectory, unlink -> engine.removeFile, each
resolving the parent via a shared splitParent helper (also used by open-create).
- runtime.fs: makeDirectory(path) and remove(path).
- fat-test now exercises the whole path — mkdir /mnt/usb/TESTDIR, create + write +
read a file inside it, then remove it — behind a new `fat-mutations` QEMU case.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — fat-mount, fat-mutations (mkdir/write/read/unlink through the mount),
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The FAT engine could create, read, write, and grow files, but never free clusters
or make directories — so overwriting a shorter file left a stale tail (a real bug:
corrupt boot-log re-flushes, and later corrupt compiler cache/.o files). This adds
the mutation half of the engine, with the corruption fix wired all the way through.
Engine (system/services/fat/engine.zig), all host-tested:
- freeChain: return a cluster chain to the pool (bounded against a corrupt cycle) —
the shared primitive under truncate and remove.
- truncate: free the chain and zero the entry's size/first-cluster (O_TRUNC).
- createDirectory (mkdir): allocate + initialise a cluster with "." and ".." and add
the directory entry to the parent.
- removeFile (unlink): free the chain and mark the 8.3 entry plus any preceding
long-name entries deleted, so a reused slot can't inherit an orphaned long name.
Refuses directories.
- createFile now shares a common addEntry helper with createDirectory.
O_TRUNC wired end to end: a truncate open-flag (vfs protocol) that the router already
forwards; runtime.fs.OpenOptions.truncate; and fat's handleOpen calls engine.truncate
on an existing file. The boot-log flush (log-flush + init) now opens with truncate, so
a shorter log on a later boot of the same stick leaves no stale tail — closing the
caveat from the boot-log work.
mkdir/unlink are engine-complete and host-tested but not yet exposed as VFS
operations / runtime.fs methods (they are new path-based ops needing router cases);
rename and the richer stat (mtime/mode, blocked on wall-clock) remain. See
docs/zig-self-hosting.md (Phase 2).
Verified: zig build, zig build test (8 engine host tests, incl. truncate, the
overwrite-no-stale-tail regression, remove, and mkdir), zig build check-fat-image, and
a sequential QEMU sweep — fat-mount, log-flush (DANOS.LOG read back at 11804 bytes,
clean, with the truncate-based final flush), vfs, vfs-client-death, usb-storage,
orderly-shutdown, initial-ramdisk, smoke — all green.
A forward-looking design note on making danos a real Zig target
(-target x86_64-danos) and eventually running the compiler on it, focused on
the standard-library surface (not the editor/terminal).
The core realisation: Zig 0.16 (post-writergate) collapses an OS port to ONE
seam — std.fs is gone, everything routes through the std.Io vtable, and
std.posix is generic over a single per-OS `system` module (std.os.<tag>). So the
port is "write std.os.danos once" and the whole fs/process/Io tower lights up,
rather than reimplementing the namespaces.
Records the decisions this shapes now: build runtime.os (the seam, promoted into
a forked std/os/danos.zig later) plus a thin runtime.fs; retire the premature
library/posix shim (only 5 unistd call sites); do NOT hand-mirror the high-level
std namespaces; do NOT emulate the Linux ABI; defer musl. Covers the host/target/
self-host roles and the four-part compiler fork, a coverage table of what danos
has vs the gaps (mkdir/unlink/rename/truncate, richer stat, wall-clock, env, cwd,
entropy, stdio bytes), a phased plan (target -> read-side+retire-posix ->
fs-mutation+stat -> single-threaded self-linked compiler), and the risks
(fork rebase treadmill, -fsingle-threaded and -fno-llvm/-fno-lld being
load-bearing, the "w"-does-not-truncate corruption bug). Linked from the docs index.
Daniel Samson