Kick off the display service track (docs/display.md, docs/display-plan.md): a
user-space compositor that owns the framebuffer. GOP and the PCI display device
are two views of one controller; GOP dies at ExitBootServices, so the portable
base is the boot-handoff linear framebuffer.
D1 makes that framebuffer reachable from user space over the existing device
claim/mmio_map path rather than a bespoke syscall:
- device-abi: a `display` DeviceClass, a DisplayInfo{w,h,pitch,format} on the
descriptor, and a flags field on resources with a write-combining bit.
- devices-broker: seedDisplay() publishes the loader's framebuffer as a
root-level `display` node (one WC-flagged memory resource); kmain seeds it
after discovery. displayDevice()/displayClaimed() track the claim.
- paging/mmio_map: mapUserDeviceInto gains a write_combining bool — a WC-flagged
resource maps through PAT entry 4 instead of strong-uncacheable (an
uncacheable framebuffer blit is glacial).
- console: falls silent while a display service holds the framebuffer, and is
forced back on by the panic/exception paths.
Gate: the `display` kernel test asserts the seeded node's shape and that the
claim + mmio_map leaf is genuinely write-combining (PAT bit set, PCD/PWT clear).
Regression-checked discovery/ioport/claim-release/supervision/device-list/
device-manager with the +1 device in the table.
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The AML module becomes a build module compiled into both the kernel (for
the \_S5 sleep state it still needs) and the new acpi service — one
source, two builds, no fork. The kernel publishes a single acpi-tables
node: the DSDT/SSDT blobs as memory resources, a broad io_port grant (the
honest trust boundary — firmware AML names whatever ports it chose, known
only after parsing), and the SCI for the M21 event track. The acpi
service claims the node, maps each blob through the ordinary mmio grant
(which preserves the sub-page offset onto the bytecode), and runs the
same parser the kernel does. It self-verifies its namespace Device count
against the kernel's — 34 = 34 — deterministically via an argv the
acpi-parse test passes, so no racing the shared serial buffer. Parse-only
touches no hardware; OperationRegion evaluation waits for _CRS/_STA in
M20.2. The manager spawns 'discovery' (the neutral ramdisk name) at
startup. Suite 56/56.
The `system` module (formerly `danos`) had become a grab-bag: it held the
loader<->kernel handoff *and* the kernel<->user ABI *and* the device wire types, in
one module three different audiences imported. Usage proved the seam — the
bootloader never touched the syscall/device ABI, and user space never touched the
boot handoff — so split it by audience, one module per contract:
system/boot-handoff.zig loader <-> kernel: BootInformation, Framebuffer,
MemoryMap, the VM layout + physicalToVirtual, kernel_abi
system/abi.zig kernel <-> user, core: SystemCall, mmap prot flags,
page_size, notify_badge_bit, ServiceId
system/devices/device-abi.zig kernel <-> user, devices: DeviceDescriptor,
DeviceClass, ResourceDescriptor, ResourceKind, ...
device-abi is the devices sub-project's public interface, exposed as its own module
the way vfs exposes vfs-protocol — importable by user space, unlike the
kernel-internal device model it also feeds. That collapses a real duplication:
DeviceClass and ResourceKind were defined twice (device-model.zig and the contract,
kept "in sync by hand"); device-model now re-exports them from device-abi, so the
enum a driver matches on and the one the kernel classifies with are one type.
Each import now declares which contract it speaks: the bootloader imports only
boot-handoff; a driver only abi + device-abi (via the runtime); the kernel all
three. This also retires the `system` / `runtime.system` name overlap. page_size
lands in abi (it's part of the mmap contract user space aligns to); the bootloader
keeps its own local 4 KiB constant so it depends on nothing but the handoff.
All 21 importers rewired, docs updated to keep /system mapping to source. Build,
host tests, and the QEMU suite (36/36) all green.
Daniel Samson