These were the awkward ones. Each began with an operation packed into a
single byte — two of them with a version wedged in beside it — so there was
no wrapping them: the layouts had to be rebuilt. The device manager's own
enumerate and subscribe become the reserved verbs that mean the same thing
everywhere, its replies lose three status structs the envelope already
carries, and a device id becomes the packet's target. Power drops the
version it repeated on every request, because describe is the handshake,
and stops claiming a 64-byte ceiling it never needed for calls. USB moves a
control transfer's data to the packet tail in both directions, which makes
the status length the transferred length and retires a field that had been
saying the same thing twice.
The danger in this one was not the protocols but their readers. Init
recognised a power button by two bytes at the head of a message, the ACPI
service dispatched on the first byte, the xHCI driver read its operation
with a raw integer load, and the HID drivers reinterpreted a report
wholesale — none of which would have failed to compile once the layouts
moved. They would simply have stopped: no shutdown on the power button, no
reports from the keyboard. Every one of them now reads through the
generated types, and the shutdown gate that answers only a subscriber is
the same code it was.
Two sizes were decided by measuring rather than assuming. The child-added
message is both a request and the event broadcast to subscribers, and
alignment rounds it to 48 bytes, which puts its packet exactly on the
64-byte push floor — a test pins that, because a field added carelessly
would now overflow it. The interrupt report gives up eight bytes of inline
room to make space for the header; the two drivers that produce reports
send eight and four.
Suite 110/110.
A protocol is reached by name now, not by a compile-time integer. Init is
PID 1 and already knows which binary it started, so init serves /protocol
as a vfs backend: bind claims a contract with the provider's endpoint
attached, open answers with that endpoint as the reply's capability, and
readdir lists what is bound with the task and binary behind it. The kernel
reserves the prefix — nothing may mount over it, under it, or unmount it —
and ServiceId, ipc_register and ipc_lookup are gone, their syscall numbers
left vacant.
A bind is authorized by who the caller *is*: the kernel-stamped binary
together with the supervising task's identity, matched against
/system/configuration/protocol.csv. Identity, not spelling — spawn is
ungated, so an attacker can run any bundled binary, and a name-only rule
would have let it launder grants through an init of its own making. A name
a live process holds is refused to everyone else; a dead one's is released.
Three review rounds against a hostile ring-3 process found what 108 green
tests could not, because the suite contains no attacker. Publishing init's
supervision endpoint as the registry put PID 1's mailbox in every process's
hands, where two forged bytes reached the shutdown path: privileged traffic
is now believed only from the task that holds the contract it speaks for.
A capability arriving on a request outlived every path that ignored it,
one handle per call until the table was full — in init, and in the harness
ten services share — so the arriving capability is owned by the turn and
released unless a handler says otherwise. And the kernel let anyone holding
an endpoint handle aim signals, timers, exit notices and interrupts at it:
binding now requires having created it.
Suite 108/108. The new protocol-registry case asserts eleven properties,
each one an attack that must fail.
Replaces L2's interim DMA pool (every buffer reachable by every claimed
device) with true per-grant confinement: a device reaches only buffers
whose capability was delegated to its driver.
Kernel:
- DmaRegionObject (handle kind 2): a delegation token naming a dma_alloc'd
region, passable across processes on the IPC cap slot like an endpoint
or shared-memory object. Frames stay owned by the allocating address
space (freed on dma_free/teardown as before); the token carries a `dead`
flag so a stale downstream handle can no longer bind a freed region.
- dma_alloc gains the dma_shareable flag: it returns a capability handle
in r8 and every region is tracked in a registry. A task's own regions
auto-bind into the devices it claims (its rings just work); foreign
buffers are bound explicitly.
- dma_bind / dma_unbind / handle_close syscalls (51-53). dma_bind maps a
held region (or shared-memory) capability into a claimed device's domain;
it is idempotent. handle_close reclaims a table slot (raised 16 -> 32).
- dma_free and task death unmap a region from every domain and invalidate
BEFORE its frames return to the allocator — the stale-IOTLB use-after-
free window, closed structurally.
Protocols (flag-day): block gains attach, usb-transfer gains dma_attach —
each carries a region capability on the cap slot. fat allocates its bounce
buffer shareable and attaches it; usb-storage allocates its transport
buffers shareable, attaches them to the controller, and forwards fat's
capability downstream; usb-xhci-bus binds and closes; virtio-gpu binds its
shared scanout surface. The physical addresses on the wire are unchanged
(identity IOVA), so no register-programming code moved.
Cross-process DMA (fat -> usb-storage -> xHC) now flows only through
delegated capabilities. iommu-usb-storage / iommu-usb-hid / iommu-fault
all green under per-grant enforcement; 104/104 overall (fail-open paths
unchanged).
Every user binary and the two device-logic library modules (pci, usb) now
`@import` the concern modules directly instead of aliasing through `runtime`:
runtime.ipc/process/time/service/input/block/display -> @import("<module>")
runtime.device / runtime.device_manager -> @import("driver")
runtime.fs -> @import("file-system")
runtime.Thread -> @import("thread").Thread
runtime.system.{write,writeRecord,klog*} -> logging.*
runtime.system.{sleep,timerOnce,wallClock,clock} -> time.*
runtime.system.{spawn*,kill,exit,yield,processes,...}-> process.*
runtime.system.{mmap,munmap,PROT_*} -> memory.*
runtime.dma.* / runtime.shared_memory.* / runtime.allocator -> memory.*
Each consumer keeps its own alias name (e.g. `const device = @import("driver")`),
so call sites are unchanged and there are no collisions with local `driver`
variables. build.zig now injects the concern modules into every user binary via
`default_imports`; pci/usb module import lists were updated to match.
The `runtime` and `system` shims remain for one more step (root.zig still uses
runtime); they are deleted in C5. Nothing but root.zig imports `runtime` now.
Verified: zig build, zig build test, and 17 QEMU cases (smoke, device-manager,
logger, fat-mount, fat-mutations, usb-storage, usb-hid, display-native,
virtio-gpu, input, thread-spawn, thread-mutex, process-kill, shared-memory,
driver-restart, acpi-ps2, pci-scan).
Finish the direct-import convention: a protocol is now aliased to its module
name in snake_case in every file that imports one — consumers and the runtime
client wrappers alike. This kills the last of the alias variety (the generic
`protocol`, plus `power` and `transfer`), so `device_manager_protocol.Hello`
means the same thing everywhere and grepping a module name finds all its uses.
Pure rename (identifier uses only; prose references left untouched via a
guarded pattern). 14 files, 299/299 lines.
zig build + test green; 16 QEMU cases pass (smoke, device-manager,
driver-restart, device-list, pci-scan, usb-hid, usb-storage, display-service,
display-native, display-reattach, input, acpi-ps2, vfs, fat-mount,
power-button, orderly-shutdown).
The USB class-driver transfer client was library/runtime/usb.zig, re-exported
as runtime.usb — which compiled the USB client and usb-transfer-protocol into
every user binary (init, fat, the compositor…), none of which speak USB. It is
bus-family logic, not core runtime.
Move it to its domain home, library/device/usb/usb.zig (module "usb"), alongside
the usb-abi and usb-ids data modules; fix its internal imports to go through the
runtime module; and re-export usb.abi / usb.ids so a class driver reaches the
whole USB domain through one import. runtime.usb and runtime's
usb-transfer-protocol import are removed; the three class drivers
(usb-hid keyboard/mouse, usb-storage) import module "usb" directly.
zig build + test green; usb-hid, usb-storage pass.
First step of the device-code reorganization (plan: group device code by
domain, split each domain into a shareable data module + a logic module).
This moves the pure-data modules — the enums, wire types, and taxonomies
that any layer including the kernel can import cheaply — out of
system/devices/ and into their domain home:
device-abi -> library/device/model/device-abi.zig
pci-class -> library/device/pci/pci-class.zig
usb-abi -> library/device/usb/usb-abi.zig
usb-ids -> library/device/usb/usb-ids.zig
acpi-ids -> library/device/acpi/acpi-ids.zig
aml/ -> library/device/acpi/aml/
Module names are unchanged, so this is a pure file move: only the
b.addModule paths and the host-test file list in build.zig change; no
importer is touched. system/devices/ now holds only the kernel-internal
device model (device-model, platform, acpi, device-tree, power).
The device *logic* (the pci Function helper, the usb transfer client) and
the kernel's cosmetic taxonomy dependency are handled in following commits.
zig build + zig build test green.
Daniel Samson