Completes hub support (docs/usb-hub.md). On the bus tick, a downstream
hub-port change now dispatches: a connect enumerates the new device
(B4b), a disconnect tears the old one down — recursively, since a hub
that leaves takes its whole subtree with it (children first), reporting
each interface ChildRemoved and Disable-Slotting the device. Route
strings compose across tiers, so a device two hubs deep enumerates with
a two-tier route.
QEMU's hub — unlike root-port hot-plug — DOES raise downstream
status-change events, so both paths are harness-tested: usb-hub (a
keyboard behind a hub binds usb-hid-keyboard), usb-hub-nested (a
keyboard two hubs deep), usb-hub-unplug (device_del behind the hub tears
it down). Full suite 91/91.
Real-hardware validation of the user's SuperSpeed Genesys hub with
full-speed devices on its USB2 companion is flagged for the user (QEMU's
USB2 hub does not model the compound USB3 hub).
First slice of hub support (docs/usb-hub.md), handled IN the xhci-bus
because a device behind a hub is reached by the CONTROLLER via a route
string in its slot context — topology only exists inside the driver
that owns the controller. When the scan enumerates a class-9 device it
now calls setupHub: read the hub descriptor for the downstream port
count and TT arrangement, tell the controller the slot is a hub
(Configure Endpoint with the slot add-flag sets the Hub bit, Number of
Ports, and MTT/TT-Think-Time per xHCI 4.6.6), SET_HUB_DEPTH for a
SuperSpeed hub so it can compose route strings, and SET_FEATURE
PORT_POWER every downstream port.
The Device gains topology fields (route string, root port, parent hub
slot/port for the TT) and buildAddressInputContext now fills them, so
the Address Device path is ready for downstream devices — those are
enumerated in B4b. A root-port device gets route 0 and its own port as
the chain root, unchanged behavior.
Verified in QEMU with a hub on a second controller and a device behind
it (a usb-hub QEMU case, since the boot controller's auto-assigned
devices collide on the low ports): 'hub slot 1: 8 downstream ports
powered (USB2 single-TT)'. Full suite 89/89. The user's SuperSpeed
Genesys hub is the real-hardware target, flagged separately (QEMU's
USB2 hub doesn't model the compound USB3 hub).
Daniel Samson