Kernel discovery interpreted the whole DSDT/SSDTs (~0.5 MB -> ~9700 nodes) solely to extract the _S5 sleep type for a kernel-side soft-off — ~1-2s of work on the single-core, pre-scheduler critical path, with nothing to overlap it. The ring-3 acpi service already parses the same blobs and owns S5 end-to-end (reads pm1a_cnt from the FADT, writes SLP_TYP itself; orderly-shutdown tests it). So drop the kernel parse entirely.
- all *static*-table parsing stays (MADT/HPET/FADT/MCFG): CPUs, timers, PCIe, and the power register map are still detected from ACPI, not legacy/compat addresses (timer still calibrates via HPET/PM-timer/CPUID, PIT only as last resort)
- kernel keeps reboot (FADT reset register + legacy fallbacks — no AML); soft-off is userspace-only now
- removed PowerInformation.s5/s3, the kernel AML namespace, aml_stats, amlDeviceCount, and the aml import; power.shutdown/enable/sleepS3 gone
- tests: poweroff case retired (S5 covered by orderly-shutdown); discovery drops its S5/AML checks; acpi-parse self-verifies against a device-count floor since there's no kernel count to match
The AML module becomes a build module compiled into both the kernel (for
the \_S5 sleep state it still needs) and the new acpi service — one
source, two builds, no fork. The kernel publishes a single acpi-tables
node: the DSDT/SSDT blobs as memory resources, a broad io_port grant (the
honest trust boundary — firmware AML names whatever ports it chose, known
only after parsing), and the SCI for the M21 event track. The acpi
service claims the node, maps each blob through the ordinary mmio grant
(which preserves the sub-page offset onto the bytecode), and runs the
same parser the kernel does. It self-verifies its namespace Device count
against the kernel's — 34 = 34 — deterministically via an argv the
acpi-parse test passes, so no racing the shared serial buffer. Parse-only
touches no hardware; OperationRegion evaluation waits for _CRS/_STA in
M20.2. The manager spawns 'discovery' (the neutral ramdisk name) at
startup. Suite 56/56.
The host bridge now carries MMIO apertures derived from the boot memory
map's gaps below 4 GiB (largest three, sort-merged; a single after-the-
last-region hole dies on OVMF's flash at the top) plus one aperture above
the described space — so a user-space device_register of PCI functions
with BAR resources can pass containment. The discovery test asserts
every PCI memory resource lies inside a bridge window and names any
escapee. device_register is idempotent on exact (parent, class, identity,
resources) match — a restarted registering bus cannot duplicate its
children; proven directly against the broker in the bus test.
ChildAdded gains device_id so a report can carry the registered kernel
id a matched driver needs as its assignment.
The `system` module (formerly `danos`) had become a grab-bag: it held the
loader<->kernel handoff *and* the kernel<->user ABI *and* the device wire types, in
one module three different audiences imported. Usage proved the seam — the
bootloader never touched the syscall/device ABI, and user space never touched the
boot handoff — so split it by audience, one module per contract:
system/boot-handoff.zig loader <-> kernel: BootInformation, Framebuffer,
MemoryMap, the VM layout + physicalToVirtual, kernel_abi
system/abi.zig kernel <-> user, core: SystemCall, mmap prot flags,
page_size, notify_badge_bit, ServiceId
system/devices/device-abi.zig kernel <-> user, devices: DeviceDescriptor,
DeviceClass, ResourceDescriptor, ResourceKind, ...
device-abi is the devices sub-project's public interface, exposed as its own module
the way vfs exposes vfs-protocol — importable by user space, unlike the
kernel-internal device model it also feeds. That collapses a real duplication:
DeviceClass and ResourceKind were defined twice (device-model.zig and the contract,
kept "in sync by hand"); device-model now re-exports them from device-abi, so the
enum a driver matches on and the one the kernel classifies with are one type.
Each import now declares which contract it speaks: the bootloader imports only
boot-handoff; a driver only abi + device-abi (via the runtime); the kernel all
three. This also retires the `system` / `runtime.system` name overlap. page_size
lands in abi (it's part of the mmap contract user space aligns to); the bootloader
keeps its own local 4 KiB constant so it depends on nothing but the handoff.
All 21 importers rewired, docs updated to keep /system mapping to source. Build,
host tests, and the QEMU suite (36/36) all green.
The shared kernel<->user ABI contract (BootInformation, the SystemCall numbers,
DeviceDescriptor, page_size, ...) is now the `system` module at
system/system.zig, following the convention that a directory's root file takes
the directory's name.
One overlap to note: the runtime's syscall wrappers are already `runtime.system`,
so the single file that uses both the contract and those wrappers
(library/runtime/heap.zig) aliases the wrappers locally as `system_calls`. The
two are distinct (top-level `system` vs `runtime.system`); everywhere else the
contract is just `system`.
Also: the QEMU run's serial capture now lands in the FHS log location,
zig-out/var/log/system/serial0-<timestamp>.log — a stand-in for the kernel's own
logging system, which will eventually write there itself.
Suite 35/35 plus host tests green.
The source layout now mirrors the runtime filesystem hierarchy
(docs/danos-file-system-hierarchy-FSH.md): what lives under system/ in the
source is what a running danos represents under /system. Each service and
driver is a sub-project directory that is its own Zig module — cross-project
references go by module name, never by a path into another project's files.
Moves (all git mv, history preserved):
- src/ -> system/ (danos internals; the self-representation)
root.zig -> danos.zig (the kernel<->user contract module)
kernel/arch/ -> kernel/architecture/ (arch -> architecture)
device/ -> devices/ (what /system/devices reflects)
boot/ -> /boot (the loaders, top level)
- sbin/ -> split by role:
init, vfs -> system/services/<name>/<name>.zig
hpetd, busd -> system/drivers/<name>/<name>.zig
vfs-test -> system/services/vfs/vfs-test.zig (inside the vfs project)
- lib/ -> library/runtime/ (room for other libraries beside runtime)
The VFS wire protocol becomes its own module, system/services/vfs/protocol.zig
("vfs-protocol"): the vfs sub-project exposes its interface, and the runtime's
file layer imports it by name. First instance of the "protocol module" pattern
(docs/driver-model.md); usb/block will expose theirs the same way.
Also: fix a naming-standard violation in the protocol — Op -> Operation (and
req -> request, _pad -> _padding). Docs updated: /system/services added to the
FHS doc, a repository-layout section added to the docs index, and stale source
paths swept across comments and docs.
Runtime boot paths are unchanged (the bootloader still loads /sbin/init);
aligning the runtime filesystem to the FHS is a separate follow-up. Suite 35/35
plus host tests green.
Daniel Samson