library/runtime/log.zig wires std.log to the tagged ring: the root shim
installs std_options for every binary (programs may override), logFn
formats one line per record and emits it with its level via
debug_write — the payload no longer carries the process's name; the
kernel stamps identity structurally and the serial renderer prints the
'<binary path>: ' prefix, so the transcript keeps its shape.
Migrate every writeLine/logLine/log helper family (init, vfs, fat,
device-manager, acpi, pci-bus, ps2-bus x3, usb-hid x2, usb-storage,
usb-xhci-bus, virtio-gpu — 104 call sites) to std.log.info, dropping
the hand-written prefixes. A leveled record is a complete line by
contract (raw emissions may still build lines from pieces). Test
fixtures and the display/input services keep raw writes for now — their
ring records are attributed by the kernel regardless.
Harness regexes follow the renamed prefixes (usb-hid-keyboard,
discovery) and path-named restart lines.
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
The root-hub scan logged the raw PORTSC port-speed class ("speed class 3").
Decode it to a human name — Low/Full/High/SuperSpeed/SuperSpeedPlus with the
USB generation and line rate — so the boot log says what enumerated on each
port, the USB analog of the pci-bus class line. This is the link speed only;
the device class/subclass/protocol needs descriptor reads (the USB track).
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
child_added/child_removed join the device-manager protocol. The driver
maps its register BAR (resource 0 is the ECAM config space; the walk
starts at 1), reads CAPLENGTH and HCSPARAMS1, and reads one PORTSC per
port: the connect bit and speed class come straight from hardware, no
rings needed to see the devices. The manager mirrors reported children
keyed by (parent, port), remembers which instance reported each, and
prunes a dead reporter's children before deciding the restart — the
children describe protocol state that died with the process. The
usb-report scenario drives the whole loop: two QEMU devices reported,
reporter killed, children pruned, driver respawned with backoff, and the
new instance re-claims, re-scans, and re-reports.
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
Daniel Samson