The first step of the Zig self-hosting roadmap (docs/zig-self-hosting.md): give
danos programs a danos-native file API and remove the premature POSIX compatibility
shim. This also resolves the earlier misplacement of a full-write helper into the
compat layer — that behaviour now lives natively in runtime.fs.File.writeAll.
- library/runtime/fs.zig: the danos-native file client over the VFS (open/read/
write/writeAll/seekTo/attributes/close, directory listing, mount). Handles are
*values* — a File/Directory owns its VFS node id and byte offset — so there is no
per-process fd table or descriptor limit, unlike the POSIX fd model the shim
emulated. This is where the operations that later become std.os.danos are staged.
- Retire library/posix/ (unistd, stdio): only five call sites used it, all file
operations, all migrated to runtime.fs — fat (mount), the vfs-test and fat-test
clients, and init/log-flush (the boot-log flush). stdio was already dead.
- build.zig: drop the posix module, its addUserBinary parameter, the per-binary
import, and the ~26 call-site arguments.
- Docs: the VFS protocol's client is now runtime.fs; the docs index and
coding-standards note posix is retired and the foreign-ABI naming exception now
applies to the future std.os.danos seam; the process-lifecycle note points the
future musl layer at that same seam rather than the deleted directory.
Deferred by design (see the roadmap): the C-ABI runtime.os errno seam is built at
fork time (its shape must match std/os/danos.zig); truncate/mkdir/rename are
Phase 2; stdio-byte fds and cwd are later slices.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — vfs, vfs-client-death (the park/hold-handle path), fat-mount, log-flush,
orderly-shutdown, initial-ramdisk (log-flush silent in the bare sweep), smoke, init,
usb-storage, device-manager — all green.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
Two related changes to make device identities legible in the boot log and in
the code that matches on them.
Logging: the pci-bus driver decodes each function's class/subclass/prog-IF
triple to human names (via the existing pci-class module), and the acpi
service appends each _HID's human name (via acpi-ids) to its report line. So
"class 0x01 (Mass Storage Controller) subclass 0x06 (Serial ATA Controller)
progif 0x01 (AHCI 1.0)" reads straight off the log when writing a driver.
Naming: a new coding standard ("Named values, not magic numbers") says a value
with meaning gets a name, prefer an enum for value sets. Applied:
- pci-class is refactored from u8-switch tables into a BaseClass enum plus
per-class SubClass/ProgIf enums with name() methods (the usb-ids shape). The
public className/subclassName/progIfName(u8...) API is unchanged, so the
hardware-byte decoders (pci-bus, the kernel dump) are untouched; output is
byte-identical.
- the device-manager builds the xHCI class triple from named parts instead of
a bare 0x0C0330.
- the acpi service's _CRS walk names its resource-descriptor tags as
SmallResourceType/LargeResourceType enums, and the _HID integer decode uses
the AML module's existing *_opcode constants (now re-exported from aml.zig)
rather than bare 0x0A/0xFF/... literals.
`zig build` now installs into a FHS-shaped zig-out that *is* the danos filesystem
and the boot volume — no more zig-out/bin or a separate esp/:
zig-out/EFI/BOOT/BOOTX64.efi (firmware entry; UEFI fixes this path)
zig-out/boot/initial-ramdisk.img
zig-out/system/kernel (the kernel binary)
zig-out/system/services/init vfs
zig-out/system/drivers/hpet bus
Binaries land at their addressed, leaf-collapsed paths per the sub-project
resolution rule (system/services/init/init.zig -> system/services/init); vfs, hpet,
and bus are installed to their FHS homes too, so the image is complete even though
at boot they arrive inside the initial-ramdisk.
The bootloader (boot/efi.zig) now loads each artifact from its FHS path
(system\kernel, system\services\init, boot\initial-ramdisk.img); run-x86-64 mounts
zig-out directly; the QEMU test harness assembles its ESP from the FHS zig-out.
Also renames system/kernel/main.zig -> kernel.zig so the kernel follows the
name/name.zig convention (kernel/ = ring-0 code, services/ = ring-3 OS services).
Documents the resolution rule in the repository-layout section (README + coding
standard). Suite 35/35 plus host tests green.
Follow-up to the monorepo re-org. Suite 35/35 plus host tests green.
POSIX compatibility is now its own library, library/posix/ (unistd, stdio),
layered strictly over the runtime — it calls the runtime's IPC/heap, never
system calls directly. The runtime is now POSIX-free (the danos-native
application ABI). The VFS wire protocol is danos-native throughout
(Stat -> FileStatus, .stat -> .status, O_CREAT -> create); the POSIX layer
maps the POSIX spellings at the boundary. The coding standard's ABI-name
exception is scoped to one place: a file is allowed POSIX spellings only if it
lives under library/posix/ — everywhere else, danos naming with no exception.
Naming fixes, all mechanical:
- initrd -> initial-ramdisk: the source file, the module, the tool
(make-initial-ramdisk.py), the artifact (initial-ramdisk.img, including the
bootloader's load path), and the identifiers.
- system/kernel/device-service.zig -> devices-broker.zig: it is ring-0 kernel
code (the trusted device table + claim capability), not a ring-3 service. The
future user-space device *manager* (policy) will live in system/services/.
- Dropped the daemon `d` suffix: hpetd -> hpet, busd -> bus. A driver lives in
system/drivers/, so the folder already says what it is; encoding the role in
the name too is redundant. The coding standard drops that exception.
- system/devices/aml/interp.zig -> interpreter.zig (the type was already
Interpreter).
Two driver-model milestones plus a tree-wide naming pass. Suite 35/35
(QEMU) + host tests green.
M11 — IRQ-as-IPC. A ring-3 driver now sleeps until its device interrupts
it. New src/kernel/irq.zig: per-GSI endpoint bindings, comptime per-vector
trampolines, dispatch = mask GSI -> LAPIC EOI -> notifyLocked, all under one
lock region. irq_bind/irq_ack syscalls, gated by the device claim like
mmio_map. interruptDispatch no longer EOIs — each handler owns its EOI,
because a level line must be masked before it is acknowledged (irq_ack is
the unmask). Bindings are keyed on the owning task and released on exit
(a shared endpoint's siblings survive). hpetd rewritten interrupt-driven.
Tests: hpet (rewritten, reads back the I/O APIC routing) and irqfree.
M12 — bus drivers. DeviceDesc gains a parent, making the device table a
tree. dev_register (device_register) lets a process publish children below
a device it claimed; the kernel enforces resource containment (a child's
resources must nest in its parent's), so a descriptor can't fabricate a
window over kernel RAM. Descriptor copied in via copyFromUser (physmap
walk — an unmapped user pointer fails the call instead of faulting the
kernel). Per-parent child cap bounds table exhaustion. sbin/busd.zig is a
worked bus driver. Test: bus.
Naming — per docs/coding-standards.md: non-acronym abbreviations spelled
out (message, descriptor, device_service, scheduler, runtime, physical,
interpreter, ...); acronyms kept (IPC, MMIO, DMA, HCD, ...); files are
kebab-case (ipc-synchronous.zig, device-service.zig, vfs-protocol.zig, ...).
Exceptions: POSIX/C ABI names and Zig idioms (init/len/ptr) kept. Module
collisions resolved by specific naming (config -> parameters, device.zig
alias -> device_model). AML op/Op disambiguated: op = opcode, Op =
operation; per-opcode parse handlers renamed opX -> parseX.
New driver docs: drivers.md, driver-model.md (bus/class/HCD shapes + the
proposed M13–M16 ABI), coding-standards.md.
Daniel Samson