library/runtime/log.zig wires std.log to the tagged ring: the root shim
installs std_options for every binary (programs may override), logFn
formats one line per record and emits it with its level via
debug_write — the payload no longer carries the process's name; the
kernel stamps identity structurally and the serial renderer prints the
'<binary path>: ' prefix, so the transcript keeps its shape.
Migrate every writeLine/logLine/log helper family (init, vfs, fat,
device-manager, acpi, pci-bus, ps2-bus x3, usb-hid x2, usb-storage,
usb-xhci-bus, virtio-gpu — 104 call sites) to std.log.info, dropping
the hand-written prefixes. A leveled record is a complete line by
contract (raw emissions may still build lines from pieces). Test
fixtures and the display/input services keep raw writes for now — their
ring records are attributed by the kernel regardless.
Harness regexes follow the renamed prefixes (usb-hid-keyboard,
discovery) and path-named restart lines.
Replace the linear keep-earliest RAM buffer with a 512 KiB ring of
framed records (log-ring.zig, host-tested): every debug_write becomes
one record per payload line, stamped by the kernel with the sender's
pid, task name (its binary path), level, per-boot sequence number, and
monotonic timestamp. Attribution is structural — a payload cannot forge
another sender's tag, and newline injection lands inside the forger's
own next record. Oldest records are overwritten when full; sequence
gaps make the loss countable.
debug_write gains a level argument (err/warn/info/debug/raw; old
two-arg callers clamp to raw). klog_read becomes a stream-offset read
that fails once the cursor falls behind the ring's tail; the new
klog_status (#45) returns the cursors plus the boot wall-clock anchor —
what the logger service will name per-boot log directories with.
The log now guards itself with a dedicated spinlock (BKL -> log lock
order, never the reverse); panic paths use a bounded try-acquire and
fall back to sinks-only. Serial rendering keeps the historical
transcript byte-identical for kernel and legacy raw output; leveled
records get a kernel-rendered name prefix. log-flush/init's interim
drains start at the ring tail and write framed records until the logger
service replaces them.
The "fs.base" spelling read like a field/submodule access, but no such
identifier exists — it meant the x86_64 FS segment base (the IA32_FS_BASE
MSR). Two problems fixed:
- Arch-neutrality: in generic docs, the runtime, and the plan, the mechanism
is now named by its arch-neutral concept — the "thread pointer" — matching
the already-renamed `thread_pointer` Task field, `set_thread_pointer`
syscall, and `architecture.setThreadPointer` fn. x86-specific spots keep
the precise names: `IA32_FS_BASE` (the MSR), `%fs:8`/`%fs:0`, variant-II.
- Stale identifiers: the M10 section in threading-plan.md still referenced
`fs_base` on Task and `architecture.setFsBase` — both renamed away in the
arch-neutral pass. Corrected to `thread_pointer` / `setThreadPointer`.
The x86-only `thread-tls` test (which really does write `%fs:8`) now says
"FS base" (no dot) consistently, matching the established form already in
tests.zig. The matched serial markers ("thread-tls: ok" / "thread-tls:
FAIL") are unchanged; only a non-load-bearing FAIL parenthetical was
reworded.
Verified: zig build clean, thread-tls passes.
Expand the abbreviations flagged in docs/coding-standards.md (names spelled
out in full unless an acronym) across the kernel, runtime, ABI, tests, and
docs:
aspace -> address_space (AspaceRef -> AddressSpaceRef, retainAspace ->
retainAddressSpace, loaded_aspace -> loaded_address_space, the
liveAspaceCount/aspaceDestroyCount test hooks, etc.)
vaddr -> virtual_address
paddr -> physical_address
The kernel test case and its serial markers are renamed to match:
aspace-refcount -> address-space-refcount (kernel dispatch string and
test/qemu_test.py case name kept in sync). Prose in docs uses the natural
"address space"/"virtual address"; backticked field/identifier references
use the code spelling.
Also expand the bare "AS" abbreviation in three ABI comments and reframe the
set_thread_pointer ABI/handler docs to lead with the arch-neutral concept
(user-space TLS thread pointer; x86_64 IA32_FS_BASE, aarch64 TPIDR_EL0)
rather than x86 FS-first, matching scheduler.zig's existing framing.
Foreign ABI names preserved: the ELF p_vaddr field and mmap/mmio remain.
Verified: zig build, zig build test, and the full 25-case QEMU guardrail
suite all green.
runtime.Thread.RwLock (reader-preferring, lock/tryLock/unlock +
lockShared/tryLockShared/unlockShared) and WaitGroup (start/finish/wait), both on
the existing Mutex/Condition.
A compile-time Futex seam gated on builtin.os.tag: the futex syscalls on danos, a
spin+yield mock off-target (Zig 0.16 has no std.Thread.Futex; wake is a no-op
since the state machines re-check). thread.zig is wired into zig build test, so
Mutex/RwLock/WaitGroup run as host unit tests with real std.Thread threads (test
blocks compile only under test, so std.Thread there is fine on freestanding).
thread-rwlock QEMU case: 2 writers set both halves of a value under the exclusive
lock while 3 readers check they match under the shared lock; zero half-write
observations across ~150k reads.
Marks Phase 2 (M7-M11) built. threading.md/threading-plan.md status updated.
Gate: host zig build test covers the sync primitives; thread-rwlock PASS (3x);
full Done gate 26/26 (whole thread-* suite + guardrail); build clean.
Each thread gets its own x86_64 thread pointer (FS base) for user-space TLS.
Task.fs_base is restored on every context switch only when it changes (same
conditional-load discipline as CR3; architecture.setFsBase -> wrmsr
IA32_FS_BASE). New set_thread_pointer=44 syscall sets the caller's fs_base and
loads it now. The kernel never touches FS, so no swapgs complication.
The runtime lays a small per-thread TLS block at the top of each thread's stack
(self-pointer at %fs:0 + scratch) and the thread trampoline calls
set_thread_pointer before any user code — so every spawned thread has a private,
switch-stable thread pointer, reclaimed with the stack.
thread-test tls mode: two threads write unique markers to their own %fs:8 and,
after both wrote, read back — a shared fs.base would clobber one (cross-talk).
Deferred: the Zig threadlocal *compiler* layer (ELF variant-II PT_TLS + linker
sections + template copy) — high-uncertainty, no consumer today; this lands the
load-bearing per-thread fs.base it builds on. See docs/threading-plan.md M10.
Gate thread-tls PASS (3x); full guardrail 25/25; build + host tests clean.
join no longer needs a per-thread IPC endpoint. New thread_join(tid) syscall
blocks the caller until the task with id tid exits; the exit paths call
wakeJoinersLocked. join only reclaims the joined thread's USER stack, which the
thread vacates the instant it enters the kernel to exit, so waking at exit time
(not reap time) is safe — no reaper/aspace juggling or user-memory write, and
equally std-shaped (like pthread_join). thread_spawn drops the exit-endpoint arg
(runtime passes no_cap). thread-test's join mode runs 40 spawn+join cycles that
would exhaust the 16-slot handle table under the old endpoint scheme.
Also harden the M8 reaper: its single per-core reap slot could be overwritten by
a second death on that core before draining (a fresh-task/SMP timing window), an
intermittent one-stack leak that made task-reap ~20% flaky. Replace it with a
per-core reap LIST plus a .reaping task state so a pending slot can't be reused
before its stack is freed. task-reap now 11/11 isolated.
Deferred: detached-thread user-stack reclaim (still at process exit, as in M3).
Gate thread-join PASS (3x); full guardrail 26/26; build + host tests clean.
Move the mmap/mmio grant-arena cursors off Task into the per-address-space object
(scheduler aspace_refs, exposed via aspaceMmapNextPtr/aspaceDeviceMapNextPtr), so
sibling threads in one address space hand out disjoint grants. systemMmap reserves
a range under a brief lock then maps per page under a short-held lock (not the
whole grant): the big lock runs with interrupts disabled, so pinning it across a
multi-MiB memset+map froze other cores. Guard the runtime heap's rawAlloc/rawFree
with a Thread.Mutex, gated on !single_threaded so ordinary binaries compile it out.
thread-test gains an alloc mode: 4 threads x 500 alloc/fill/verify/free cycles;
any overlap between concurrent allocations is caught by the pattern check.
Also fix the affinity guardrail: its 3-billion-iteration busy-loop had
codegen-dependent wall-time (adding a function to tests.zig swung it ~4s -> ~63s
and timed it out). Reworked to wait on the wall clock instead.
Gate thread-alloc PASS (3x); full guardrail 23/23 green; build + host tests clean.
New thread_self=42 syscall backs runtime.Thread.getCurrentId (the calling
thread's kernel task id). thread-test gains an id mode: two workers read
getCurrentId and the main thread confirms all three ids are non-zero and
distinct. Per-thread threadlocal TLS is deferred by design (no consumer; it would
need context-switched fs.base for an unused feature), as are RwLock/WaitGroup.
Marks the threading feature built (M1-M6): threading.md + docs/README.md status
updated, all thread-* cases wired into qemu_test.py.
Gate thread-id PASS; full suite green: 21/21 (thread-spawn/join/futex/mutex/id,
aspace-refcount, + 15 guardrail cases), zig build clean, zig build test green.
runtime.Thread.Mutex is the classic three-state futex mutex (unlocked/locked/
contended): the fast path is a single CAS and only a contended lock enters the
kernel. Condition is a futex sequence counter (wait/timedWait/signal/broadcast,
spurious wakeups allowed, use in a predicate loop); a signal racing the unlock
bumps the seq so it is never missed. Semaphore is permits guarded by
Mutex+Condition. All mirror std.Thread's shapes, ported onto runtime.Thread.Futex.
thread-test gains a mutex mode: 2 producers + 2 consumers move 2000 unique items
through an 8-slot ring (small enough that both sides block); the consumed
checksum and tally match exactly, proving the lock and condvars correct under
real cross-core contention.
Deferred with rationale (see docs/threading-plan.md): migrating join to a futex
completion word needs kernel clear-on-exit (else use-after-free munmapping a live
stack); host unit tests need a mockable Futex seam.
Gate thread-mutex PASS (3x); 17 guardrail/thread cases green; build + host tests
clean.
New private syscalls futex_wait(addr, expected, timeout_ns)=40 and
futex_wake(addr, count)=41. A waiter is a .blocked task tagged with
Task.futex_addr (no queue linkage); futex_wait reads the user word under the big
lock and parks only if it still equals expected, so a concurrent wake can't slip
between the check and the block. futex_wake scans the task table and readies up
to count waiters in the same address space. A timed wait also sets wake_at so the
existing wakeExpired times it out; futex_addr staying non-zero (only futex_wake
clears it) distinguishes timeout from a real wake. Waiters park in-kernel, so an
idle core still halts (no busy-wait).
runtime.Thread.Futex mirrors std.Thread.Futex (wait/timedWait/wake). thread-test
gains a futex mode: a waiter parks, the main thread wakes it (serial order
waiting/waking/woke, asserted by the case regex), and timedWait reports a
timeout.
Gate thread-futex PASS (3x); 18 guardrail cases green incl. sleep/event/ipc
blocking paths; build + host tests clean.
thread_spawn takes a 4th arg, an exit-endpoint handle: spawnThreadSupervised
resolves and refcounts it under the spawn lock (like spawnProcessSupervised), so
a thread's death posts a child-exit notification carrying its tid. runtime
Thread.join blocks in replyWait on that (private) endpoint for its tid, then
munmaps the stack; detach relinquishes the join (stack reclaimed at process
exit, for now). New current_core=39 syscall + Thread.currentCore() lets a worker
observe which core it ran on.
The closure now lives at the top of the thread's own (private) stack instead of
the heap, so spawn/join never touch the not-yet-thread-safe runtime heap.
thread-test gains a join mode: 4 workers x 100k atomic increments, joined, with
counter == N*K and >1 core stamped (real parallelism), plus a detached worker.
Gate thread-join PASS (4x, non-flaky); 17 guardrail/M1/M2 cases green; build +
host tests clean.
A thread is a task sharing the caller's address space. New private syscalls
thread_spawn(entry, stack_top, arg)=37 and thread_exit=38: thread_spawn goes
through scheduler.spawnThread (retains the shared aspace), thread_exit ends the
task like a process exit(0) (terminateCurrent -> releaseAspace, so the space
survives while siblings hold it). The closure pointer reaches the new thread in
rdi via a new jump_to_user_arg asm path and a per-task user_arg (0 for a normal
process, whose _start ignores it) - so the runtime trampoline is a plain C-ABI
Zig function, no naked asm.
runtime.Thread (library/runtime/thread.zig) mirrors std.Thread.spawn: mmap a
stack, heap-allocate the args closure, hand the kernel the trampoline + closure.
addThreadedUserBinary opts a binary into single_threaded=false; thread-test is
the first, and proves a worker runs in the shared address space via a shared
global the main thread polls.
Gate thread-spawn PASS; 16 guardrail cases green (incl. args/init/process on the
new jump_to_user_arg path) + aspace-refcount; build + host tests clean.
The native backend can now change resolution and presents tear-free.
Mode-setting without churn. The driver sizes its scanout resource + shared surface to the
largest mode it offers and treats a mode change as re-pointing the scanout rectangle within
that surface — so the resource, its backing, and the shared mapping never change, and the
surface's row stride (the max width) is fixed while the active width/height move. The
compositor is handed that stride in the announce and composes at it; a smaller mode just
paints the top-left rectangle. This sidesteps the surface re-share a true resolution change
would otherwise need (the service harness can't reply with a capability).
- scanout-protocol gains get_modes + set_mode; the driver offers {640x480, 800x600} and
re-points set_scanout on set_mode.
- backend.VirtioGpu carries the surface stride, exposes modes()/setMode(), and reports
canModeSet = hasVsync = true.
- runtime.display gains modes()/setMode() (display-protocol get_modes/set_mode, forwarded to
the backend) — the client-facing API.
- EDID: the driver negotiates VIRTIO_GPU_F_EDID when the device offers it, reads the monitor's
EDID, and logs its preferred mode (parsed from the first detailed timing descriptor).
- vsync: every resource_flush is fenced (VIRTIO_GPU_FLAG_FENCE); the device signals the fence
when the frame is on screen, which the used-ring ack the synchronous present already waits
on gates — so a completed present is a tear-free one.
After the native upgrade the compositor runs a one-shot mode-set self-check: query the modes,
switch to a different one, re-composite, and confirm the backend reports the new geometry —
the gate's markers.
Gate: python3 test/qemu_test.py display-modeset (reuses the display-native boot) — "display:
mode set to 800x600, verified" + "display: vsync present ok", passing 3/3. host tests,
display-service, display-demo, shm, virtio-gpu, and display-native still pass.
The compositor now boots on the GOP framebuffer and upgrades to the virtio-gpu driver
the moment it announces itself — the pluggable-scanout payoff.
The shared surface. The scanout resource is an shm region the driver creates
(shm_physical, a new syscall, hands it the guest-physical for attach_backing) and passes
to the compositor as a capability. The compositor maps it and composites straight into
it: on x86 DMA is cache-coherent, so the cacheable shared pages the CPU paints are exactly
what the device transfers-and-flushes — no copy, no explicit flush.
The handshake. After bring-up the driver looks up .display and sends attach_scanout with
the geometry + the surface capability. The compositor maps the surface, looks up the
driver's .scanout endpoint itself (the driver registered it — no need to pass it), switches
to backend.VirtioGpu, and re-composites the current frame. present() over the native
backend is a present request on .scanout -> transfer-to-host + resource flush. The first
native present is deferred to a one-shot timer: presenting inline from the announce handler
would deadlock, since the driver is still blocked on our reply and not yet serving .scanout.
After it lands, the compositor reads a pixel back from the shared surface to confirm the
frame reached the device's backing.
- shm_physical (syscall 36) + runtime.shm.physical.
- scanout-protocol (the compositor->driver present channel), separate from the
client-facing display protocol; the display protocol gains attach_scanout.
- backend.VirtioGpu joins backend.Gop in the tagged union; select() still boots GOP.
- the virtio-gpu driver's scanout backing is now shm (was DMA); it announces + serves
.scanout present requests (transfer-to-host + flush of the shared surface).
Also fixes a latent framebuffer-geometry corruption the display service hit only when it
enumerated the device tree alongside a busy device-manager: Gop.init now captures the
geometry into a small value the instant device_enumerate returns (rather than re-reading
the 328-byte descriptor across the later claim/mmio_map syscalls) and retries on a zero
geometry. The underlying device-table clobber is a separate kernel bug, tracked apart.
Gate: python3 test/qemu_test.py display-native (QEMU -device virtio-gpu-pci) — "display:
scanout upgraded to virtio-gpu" + "display: native present verified" + "display-demo: ok",
passing 3/3. host tests, display-service, display-demo, shm, and virtio-gpu still pass.
Generalize capability passing from endpoints to memory objects. The per-task
handle table now holds kind-tagged entries (scheduler.HandleObject{kind, ptr});
closeHandles and shareCapability dispatch by kind, so a shared-memory object
rides an ipc_call send_cap exactly like an endpoint and is refcount-freed only
when its last capability drops.
- shm_create(len) -> vaddr, handle: contiguous, zeroed, cacheable frames wrapped
in a refcounted ShmObject, mapped into the caller's shm arena (PML4[230]).
- shm_map(cap) -> vaddr: map the same physical pages into a receiver that got the
capability. mapUserSharedInto maps WB-cacheable + device_grant, so a sharer's
teardown never frees the shared frames — the object owns them.
- runtime.shm: create(len) -> Region{ptr, handle, len}, map(handle) -> ptr.
Gate: qemu_test.py shm — shm-client creates a region, writes a pattern, passes
its capability to shm-server, which maps it and reads the same bytes back
(shm: shared 4096 bytes ok). ipc/ipc-call/ipc-cap/supervision/dma/usermem/
display-service and host tests all still pass — the handle change broke no IPC.
Drive the compositor from a separate process, proving the pipeline end to end.
- runtime.display: a Layer handle (fill / blitTile / configure / damage /
destroy), createLayer, and a color(r,g,b) helper that caches the mode and
packs via protocol.pack. Coordinates are signed over the u32 wire fields
(@bitCast both ways), so a layer may sit or move partly off-screen.
- system/services/display-demo: the input-source analog for the compositor — a
full-screen wallpaper, a rectangle it slides back and forth (moved by
configure each frame, so the damage-driven present repaints old + new), and a
cursor. Presents in a loop paced by runtime.time. Wired into build + initrd.
Fix this surfaced: protocol.message_maximum was 4096, but the kernel caps every
IPC message at MESSAGE_MAXIMUM = 256, so replyWait rejected the oversized receive
buffer with -E2BIG and the serve loop had been spinning since D2 (invisibly, as
those gates matched init-time heartbeats). Set it to 256; blit_tile is now
explicitly a small-tile path (larger bitmaps are the deferred shm surface).
Gate: `python3 test/qemu_test.py display-demo` — the demo drives frames of
motion through the layer client API and logs `display-demo: ok`. Regression:
zig build test, display (D1), display-service (D2/D3), and default zig build.
Stand up /system/services/display: a ring-3 process that claims the framebuffer
D1 seeded, maps it write-combining as the front buffer, allocates a cacheable
back buffer, and presents composed frames. The GUI track's compositor, reached
by name over ServiceId.display (= 9).
- protocol.zig: the display wire protocol (info/create_layer/configure_layer/
destroy_layer/fill_rect/blit_tile/damage/present). `info` and a whole-screen
`present` are live; the layer ops fail-stub until D3.
- display.zig: enumerate -> claim -> mmio_map(WC) the LFB, mmap a cacheable back
buffer, clear it and present it (proving the double-buffer path), then serve.
- runtime.display + barrel exports (display, display_protocol): a cached
`.display` client with info()/present(), the runtime.block shape.
- init spawns "display" in boot_services; build.zig wires the protocol onto the
runtime, builds the exe, packs it into the initial-ramdisk, installs it.
mmap fix the back buffer forced: systemMmap was capped at 256 pages (1 MiB) by a
fixed kernel-stack scratch array. Rewrote it to map page-by-page with rollback
(no array) and raised the cap to 8192 pages (32 MiB) — enough for a 4K back
buffer. A real limitation met.
Gate: `python3 test/qemu_test.py display-service` matches the service's own
serial heartbeats (display: online WxH / presented frame 0), printed only after
the full claim -> WC-map -> back-buffer -> present chain. Regression-checked
usermem, heap, init, and D1's display.
init writes /mnt/usb/DANOS.LOG at shutdown and then enters S5 — but the write sat in the USB flash controller's write cache and was lost when power was cut, because nothing issued SCSI SYNCHRONIZE CACHE. Invisible in QEMU (its backing file commits immediately); real on hardware. The boot-time flush survived only because the machine kept running afterward and the cache drained on its own.
- block protocol gains a flush op; usb-storage serves it with SYNCHRONIZE CACHE (10); runtime.block gains Device.flush()
- the FAT server tracks whether blocks were written and, on a file close, commits the device cache (durable-on-close — the right default for removable media, and it makes init's existing shutdown close() persist the log before S5, no init/VFS change needed)
- verified the SYNCHRONIZE CACHE actually reaches the driver on each dirty close; usb-storage/fat-mount/mutations/rename/mtime/log-flush all green
Completes Phase 2: the FAT filesystem now stamps and reports a real modification
time, built on the Phase 2d(i) kernel wall-clock. This is the last stat field the
compiler's build cache needs to reason about (source vs cached output).
- on-disk.zig: fatToEpoch / epochToFatDateTime convert between the two 16-bit DOS
date/time fields and Unix epoch seconds (UTC — FAT has no timezone). Host-tested
round-trip + an absolute check (1577836800 == 2020-01-01).
- engine: a settable current_time_epoch that create/write stamp into the entry's
write (and creation) date/time; Node/Listing gained an mtime decoded from those
fields on read. Host test: a create stamps the mtime, read back through resolve
and listEntry.
- vfs protocol FileStatus + runtime.fs.Attributes gained an mtime field; the fat
server sets current_time_epoch from runtime.system.wallClock() per request and
returns mtime from stat. The flat ramfs reports 0 (it has no timestamps).
- fat-test reads the created file's mtime through stat and checks it is a real
current time, behind a new `fat-mtime` QEMU case.
Verified against the host: the guest stamped mtime 1783971676 while the host clock
was 1783971680 (boot+test lag) — the file's mtime is real current time. zig build,
zig build test (the epoch<->DOS conversions + the engine mtime test),
zig build check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations,
fat-rename, fat-mtime, vfs, vfs-client-death, log-flush, orderly-shutdown,
initial-ramdisk, smoke, wall-clock, usb-storage — all green. mode/inode remain.
Adds real (calendar) time, the foundation for filesystem timestamps. Monotonic
time (`clock`) says how long since boot; this says what time it actually is.
- cpu.zig (x86_64): readRtcUnixSeconds() reads the CMOS real-time clock (ports
0x70/0x71) — waits out an update-in-progress, reads twice until stable, handles
BCD-vs-binary and 12-vs-24-hour per status register B — and converts to Unix
epoch seconds (UTC).
- kernel/wall-clock.zig: reads the RTC once at boot and anchors it to the monotonic
clock, so a query is a cheap arithmetic offset — no per-call CMOS poll, no lock,
no SMP hazard on the shared ports. kmain calls init() once the monotonic clock is
final and logs the epoch.
- wall_clock() syscall (33) -> Unix epoch seconds, wrapped by runtime.system
.wallClock(). Wall-clock *seconds* are mechanism the kernel owns like the
monotonic clock; calendars/timezones are user-space policy (the stale comment on
systemClock that called wall-clock a "user-space service" is updated in spirit by
the new handler's doc).
- A `wall-clock` kernel test asserts the boot RTC read is a plausible current epoch.
Verified against the host: the guest read epoch 1783971244 while `date -u +%s` gave
1783971245 (one second of boot lag) — the CMOS read + epoch conversion are correct to
the second. zig build, zig build test, and smoke/clock/init are green.
Completes the Phase 2 FAT mutation set (truncate, mkdir, unlink, rename).
- engine: rename(dir, old_name, new_name) rewrites an existing entry's 8.3 name in
place within the same directory. Refuses a missing source, a non-8.3 target, or a
name that already exists; drops any long-name entries on the old file (it takes
its new 8.3 name), LFN-aware like removeFile. Cross-directory and long-name-
preserving rename are noted limitations. Host-tested (rename keeps contents;
collision, non-8.3, and missing-source are refused).
- vfs protocol: a `rename` operation whose payload is old-path, a 0x00 separator,
then new-path.
- VFS router: a forwardRename helper + a `.rename` case that requires both paths
under the same mount (cross-filesystem rename is refused) and forwards the
mount-relative old+new.
- fat server: a `.rename` handler that requires the same parent directory and calls
engine.rename.
- runtime.fs: rename(old_path, new_path).
- fat-test now renames the file it created (before removing it) and asserts the old
name is gone, behind a new `fat-rename` QEMU case.
Verified: zig build, zig build test (the engine rename unit test), zig build
check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations, fat-rename,
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The engine gained mkdir/unlink in Phase 2a; this exposes them as first-class
filesystem operations so programs can use them.
- vfs protocol: two new path-based operations, mkdir and unlink (appended, so
existing opcodes/offsets are unchanged).
- VFS router: a forwardPath helper relays a path-based op under a mount to its
backend; the mkdir/unlink cases forward to the mounted filesystem (the flat
ramfs refuses them — it has no directories).
- fat server: mkdir -> engine.createDirectory, unlink -> engine.removeFile, each
resolving the parent via a shared splitParent helper (also used by open-create).
- runtime.fs: makeDirectory(path) and remove(path).
- fat-test now exercises the whole path — mkdir /mnt/usb/TESTDIR, create + write +
read a file inside it, then remove it — behind a new `fat-mutations` QEMU case.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — fat-mount, fat-mutations (mkdir/write/read/unlink through the mount),
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The FAT engine could create, read, write, and grow files, but never free clusters
or make directories — so overwriting a shorter file left a stale tail (a real bug:
corrupt boot-log re-flushes, and later corrupt compiler cache/.o files). This adds
the mutation half of the engine, with the corruption fix wired all the way through.
Engine (system/services/fat/engine.zig), all host-tested:
- freeChain: return a cluster chain to the pool (bounded against a corrupt cycle) —
the shared primitive under truncate and remove.
- truncate: free the chain and zero the entry's size/first-cluster (O_TRUNC).
- createDirectory (mkdir): allocate + initialise a cluster with "." and ".." and add
the directory entry to the parent.
- removeFile (unlink): free the chain and mark the 8.3 entry plus any preceding
long-name entries deleted, so a reused slot can't inherit an orphaned long name.
Refuses directories.
- createFile now shares a common addEntry helper with createDirectory.
O_TRUNC wired end to end: a truncate open-flag (vfs protocol) that the router already
forwards; runtime.fs.OpenOptions.truncate; and fat's handleOpen calls engine.truncate
on an existing file. The boot-log flush (log-flush + init) now opens with truncate, so
a shorter log on a later boot of the same stick leaves no stale tail — closing the
caveat from the boot-log work.
mkdir/unlink are engine-complete and host-tested but not yet exposed as VFS
operations / runtime.fs methods (they are new path-based ops needing router cases);
rename and the richer stat (mtime/mode, blocked on wall-clock) remain. See
docs/zig-self-hosting.md (Phase 2).
Verified: zig build, zig build test (8 engine host tests, incl. truncate, the
overwrite-no-stale-tail regression, remove, and mkdir), zig build check-fat-image, and
a sequential QEMU sweep — fat-mount, log-flush (DANOS.LOG read back at 11804 bytes,
clean, with the truncate-based final flush), vfs, vfs-client-death, usb-storage,
orderly-shutdown, initial-ramdisk, smoke — all green.
The first step of the Zig self-hosting roadmap (docs/zig-self-hosting.md): give
danos programs a danos-native file API and remove the premature POSIX compatibility
shim. This also resolves the earlier misplacement of a full-write helper into the
compat layer — that behaviour now lives natively in runtime.fs.File.writeAll.
- library/runtime/fs.zig: the danos-native file client over the VFS (open/read/
write/writeAll/seekTo/attributes/close, directory listing, mount). Handles are
*values* — a File/Directory owns its VFS node id and byte offset — so there is no
per-process fd table or descriptor limit, unlike the POSIX fd model the shim
emulated. This is where the operations that later become std.os.danos are staged.
- Retire library/posix/ (unistd, stdio): only five call sites used it, all file
operations, all migrated to runtime.fs — fat (mount), the vfs-test and fat-test
clients, and init/log-flush (the boot-log flush). stdio was already dead.
- build.zig: drop the posix module, its addUserBinary parameter, the per-binary
import, and the ~26 call-site arguments.
- Docs: the VFS protocol's client is now runtime.fs; the docs index and
coding-standards note posix is retired and the foreign-ABI naming exception now
applies to the future std.os.danos seam; the process-lifecycle note points the
future musl layer at that same seam rather than the deleted directory.
Deferred by design (see the roadmap): the C-ABI runtime.os errno seam is built at
fork time (its shape must match std/os/danos.zig); truncate/mkdir/rename are
Phase 2; stdio-byte fds and cwd are later slices.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — vfs, vfs-client-death (the park/hold-handle path), fat-mount, log-flush,
orderly-shutdown, initial-ramdisk (log-flush silent in the bare sweep), smoke, init,
usb-storage, device-manager — all green.
On a headless or real board nothing captures serial, so the boot log — the whole
diagnostic stream — is lost at power-off. This retains it in the kernel and copies
it to the boot USB volume as /mnt/usb/DANOS.LOG, the on-disk equivalent of QEMU's
`-serial file:`. Pull the stick, read DANOS.LOG on another machine.
How it fits together:
- Kernel RAM sink (log.zig): a fixed 256 KiB in-image buffer registered as a log
sink in kmain, right after serial. Because userspace debug_write funnels through
log.write, it captures the entire stream — kernel lines and every service's
output — from the first line. Fills linearly and stops when full (earliest boot
output, the most valuable, is kept); no allocation, so it is panic-safe.
- klog_read syscall (32): copies that buffer out to a user buffer, the mirror of
debug_write — same overflow-safe user-half bounds check, kernel -> user copy,
under the kernel lock so the snapshot can't grow mid-copy. Wrapped by
runtime.system.klogRead.
- log-flush (new one-shot, in the initial-ramdisk): waits for the fat server to
mount /mnt/usb, then copies the whole log to /mnt/usb/DANOS.LOG. init spawns it
once the boot services are up (fire-and-forget; it polls the mount itself). If
no volume is mounted — no stick, or the no-VFS ramdisk sweep — it exits silently.
- init shutdown flush: init repeats the copy inline at the top of shutDown(),
BEFORE it tears down the storage services (the fat server is stopped first), so
a clean poweroff captures the fullest log while /mnt/usb is still writable.
- unistd.writeAll: loops write() past the 224-byte VFS payload cap; both flush
paths use it.
The filename is 8.3 (DANOS.LOG) at the mount root — the FAT short-name rule, and
there is no mkdir on the FAT path yet. Extend-only writes mean the two same-session
flushes never leave stale bytes (the shutdown log is a superset of the boot log);
a shorter log on a later boot of the same stick can leave a stale tail — a noted,
cosmetic limitation, not worth pulling O_TRUNC into the FAT write path for now.
Verified end to end under QEMU: a new `log-flush` case (reusing the orderly-shutdown
build) asserts both markers then S5, and DANOS.LOG is read back out of the image
afterwards (11804 bytes, containing the kernel init line, the FAT mount line, and
the boot flush marker). Regression stays green: zig build, zig build test, zig
build check-fat-image, and a sequential QEMU sweep — smoke, init, initial-ramdisk
(log-flush silent in the bare sweep), orderly-shutdown, fat-mount, usb-storage,
usb-hid, vfs, input, device-manager, process, signals, dma, fault-pf.
Add a FAT12/16/32 filesystem the VFS mounts at /mnt/usb, reading and writing a
USB stick through the block device. Verified end to end under QEMU: the fat
server mounts the volume, the VFS routes /mnt/usb to it, and a client lists the
root and reads a file (the ELF magic of /mnt/usb/system/kernel).
- engine.zig: the FAT engine over a BlockDevice interface — mount (a bare FAT or,
as QEMU's VVFAT and most real sticks present it, an MBR-partitioned disk), FAT
chain walk (12/16/32), cluster allocation, directory traversal with long-name
read, and file read / write / create. Host-tested against a RAM-backed FAT16
image (create, cluster-spanning write, mid-file overwrite, read-back, list).
- on-disk.zig: the align(1) boot-sector / directory / long-name / FSInfo structs
and the cluster-count FAT-type detection.
- fat.zig: the server — wraps the .block device (a DMA bounce buffer) in a
BlockDevice, mounts the FAT, serves the vfs-protocol as a backend, and mounts
itself into the VFS at /mnt/usb. Spawned by init as a boot service.
- runtime.block: the block-device client (geometry / read / write by physical
address, so whole sectors never cross IPC).
- Raise the kernel service-name registry (maximum_services) 8 -> 16: it is
indexed directly by ServiceId, and fat = 8 was being rejected, so the fat
server exited before registering.
- VFS: an absolute path with no matching mount is now not-found rather than
silently created in the flat ramfs — so /mnt/usb fails cleanly until mounted.
Tests: fat-mount (the full stack: block -> FAT -> VFS mount -> list + file read)
passes; host units cover the engine and on-disk structs; the vfs, shutdown, and
USB regression suite stays green (10/10).
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The kernel publishes the FADT as one more acpi-tables memory resource
(tagged by its intact FACP header — the AML blobs are header-stripped);
the acpi service reads the PM1 event/control and GPE register ports from
that copy, so the kernel's own FADT parse is untouched. A power-protocol
module (ServiceId.power = 5, domain-named so an ARM PSCI service can serve
the same id) carries subscribe / shutdown / events.
The acpi service converts to runtime.service.run — device discovery, the
.power protocol, and the SCI notification all fold into one loop. At
startup it enables ACPI mode if SCI_EN is clear (the SMI dance), binds the
SCI (found as the node's len-1 irq resource, distinct from the broad
window), and sets PWRBTN_EN. On the SCI it reads PM1_STS, clears
PWRBTN_STS write-1, logs the press, publishes power_button to
subscribers, and always acks. The power-button scenario proves it with a
real QMP system_powerdown injected mid-run through the M21.0 channel.
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
Signals are statements delivered as coalescing notifications to the
endpoint a process nominates with signal_bind — never a hijacked stack,
never a question (liveness is the zero-length ping the harness answers).
process_signal is supervisor-or-self gated, like kill; unbound targets
accumulate a pending mask delivered on bind. timer_bind is the missing
timed wait: a one-shot deadline landing in the same replyWait as
everything else — what stop(), hello deadlines, and restart backoff are
built from. runtime.service.run folds requests, signals, and
notifications into callbacks; the VFS conversion deletes its hand-rolled
loop and gains the whole lifecycle contract. The signals scenario drives
ping, reload, terminate->exited, the timer, and the deaf-child
deadline->killed path from ring 3. docs/process-lifecycle.md increments
1-4 are now as-built.
process_subscribe adds an endpoint to a bounded, ref-counted subscriber
table; every death posts the same badge encoding a supervisor's exit
notification uses, equally late, so subscribers observe a fully-released
child. A dying subscriber's own subscriptions are removed first — it never
hears about itself. The VFS is the first subscriber: open handles now
record their owner and are swept when the owner dies, because a service
must never depend on clients cleaning up after themselves
(docs/process-lifecycle.md). Proven by the vfs-client-death scenario.
The kernel records an ExitReason at all three death sites — clean exit,
fault (classified by vector), and process_kill — into a bounded ring
before the exit notification posts, so a supervisor's query never races
the notice. process_exit_reason is gated by the same supervisor check as
kill; runtime.process.exitReason is the stable interface. This is the
input restart policy reads (docs/process-lifecycle.md iron rule 2).
Extend the input service beyond the keyboard so mouse and joystick/gamepad
drivers can broadcast too, with per-device publish and subscribe methods.
- protocol: KeyEvent joins MouseEvent (motion/buttons/scroll) and
JoystickEvent (axes/buttons), all carried in a common InputEvent envelope
tagged with a DeviceKind. A subscribe request carries a device_mask, so a
subscriber names the classes it wants and the service routes each event only
to interested subscribers (a mouse-only listener never wakes for keystrokes).
- runtime: per-device publish methods (publishKeyboardEvent/publishMouseEvent/
publishJoystickEvent) and subscribe helpers (subscribeKeyboard/Mouse/Joystick,
each typed, plus subscribe(mask)/subscribeAll returning the tagged envelope).
- service: subscriber table gains a device_mask; broadcast routes by the
event's device class.
- mouse driver now publishes (synthetic) mouse events like the keyboard driver;
input-source cycles all three classes; input-test subscribes to all and only
emits its "ok" marker once it has received one of each class — so the passing
test proves per-device routing, not just delivery. Real HID decoding stays a
follow-up.
No kernel changes: ipc_send is generic and the 36-byte InputEvent fits its
64-byte payload. Full QEMU suite 48/48; serial log confirms keyboard, mouse,
and joystick all reach one subscription.
Programs can now subscribe to keyboard events (key_down/key_up/key_press)
and drivers can broadcast them, through a new user-space input service.
The delivery model is forced by danos IPC: a synchronous rendezvous holds
one pending reply, so a server cannot park N subscribers blocked in a
"wait for next event" call — delivery must be push. But a synchronous push
has no timeout and the kernel never wakes a sender parked on a dead peer's
endpoint, so one dying subscriber would hang all input. So this lands the
roadmap's planned asynchronous buffered send and builds the service on it:
- ipc_send (syscall 26): non-blocking post to an endpoint's bounded payload
ring, delivered through reply_wait as a buffered message (notify_message_bit).
A full ring drops the oldest. It can never hang on a dead/slow peer.
- input-protocol + runtime.input helpers (subscribe/next, connectSource/
publish) — the first real consumer of M13 capability passing: a subscriber
hands the service its own endpoint as a capability.
- input service (fan-out via ipc_send, dead-subscriber pruning), a synthetic
input-source, and input-test; the ps2-bus keyboard driver publishes to it.
Real IRQ1 scancode decoding (which must live in the bus, the PNP0303 owner)
is a documented follow-up; the source is synthetic for now.
- build/init wiring, an `input` QEMU case, and docs/input.md.
Full QEMU suite 48/48, including the new input case and every IPC/endpoint
regression (ipc, ipc-call, ipc-cap, vfs, hpet, bus, irqfree).
process_enumerate snapshots the task table (the device_enumerate shape, so
ps is a user program); system_spawn returns the child id, records the caller
as supervisor, and takes an exit endpoint; process_kill is allowed only for
the supervisor. Every death — exit, fault, or kill — posts a child-exit badge
to that endpoint (the IRQ-as-IPC pattern as SIGCHLD). A target caught off-CPU
is reaped in place; a running one is condemned and finished at its next
system call or tick, guarded so teardown never lands mid-kernel-operation.
Tested by process-list, process-kill, and supervision (a ring-3 supervisor
exercising the whole surface); design notes in docs/process-management.md.
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.
The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).
Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
Ring 3 still has no direct in/out (no TSS I/O bitmap, IOPL never raised — a #GP), but a
driver no longer needs it: io_read(device_id, resource_index, offset, width) and
io_write(..., value) grant port access the same way mmio_map grants memory. The claim
plus the device's discovered io_port resource are the capability — resolveIoPort checks
the device is claimed by the caller, the resource is io_port, and [offset, offset+width)
stays inside it, then issues the in/out via architecture.pioRead/pioWrite. So a PS/2 or
16550 driver is now writable; the low-rate legacy hardware that needs port I/O is fine
with a syscall per access. io_port resources were recorded by discovery and ignored —
now they're used. Runtime: device.ioRead/ioWrite.
New `ioport` test claims QEMU's PS/2 controller (io_port 0x64, discovered via ACPI) and
checks the gate admits an in-range access, refuses over-wide / out-of-range / unclaimed,
and that the kernel actually reads the status port (0x1c). Suite 41/41 plus host tests.
Docs refreshed for the whole M13-M16 + port-I/O reality: drivers.md "Limits" no longer
lists port I/O, DMA memory, or barriers as missing (they exist) and its "what's next"
reflects that; the FSH doc's character-device and block-device sections are corrected
("cannot host a block driver at all" is no longer true — writable now, not yet memory-
safe pending IOMMU enforcement); device-interrupts.md unblocks the keyboard and narrows
the interrupt gap to MSI-X.
Two parts, both blockers for real PCI drivers.
ECAM config space per function: enumeratePci now gives every pci_device its own 4 KiB
configuration window as resource 0. A claimed PCI driver mmio_maps that to reach its
command register, BARs, and — the point — its capability list (MSI/MSI-X, PCIe extended
caps), with no new syscall. Verified in the discovery test (QEMU q35's functions each
carry it).
MSI: msi_bind(device_id, endpoint) -> address (rax), data (rdx) allocates a per-device
edge-triggered vector, binds it to the endpoint, and returns the (address, data) the
driver programs into its own MSI capability. Unlike irq_bind there's no GSI, no I/O APIC
entry, no sharing, and no ack cycle — dispatch recognises an MSI vector (vector_gsi ==
none, msi_bound set), EOIs, and notifies. Owner-keyed release drops the binding on exit.
Legacy INTx (_PRT parsing + shared lines) is deliberately skipped; MSI is the real
answer.
QEMU's HPET has no MSI, so the new `msi` test proves the vector-routing path with a
self-IPI (new apic.selfIpi) standing in for the device's MSI write: bind a vector,
fire it, the bound endpoint is notified. The msi_bind syscall wraps irq.msiBind with
the claim check and lands its first real use with the first PCI driver. Suite 39/39
plus host tests.
Daniel Samson
daniel