The native backend can now change resolution and presents tear-free.
Mode-setting without churn. The driver sizes its scanout resource + shared surface to the
largest mode it offers and treats a mode change as re-pointing the scanout rectangle within
that surface — so the resource, its backing, and the shared mapping never change, and the
surface's row stride (the max width) is fixed while the active width/height move. The
compositor is handed that stride in the announce and composes at it; a smaller mode just
paints the top-left rectangle. This sidesteps the surface re-share a true resolution change
would otherwise need (the service harness can't reply with a capability).
- scanout-protocol gains get_modes + set_mode; the driver offers {640x480, 800x600} and
re-points set_scanout on set_mode.
- backend.VirtioGpu carries the surface stride, exposes modes()/setMode(), and reports
canModeSet = hasVsync = true.
- runtime.display gains modes()/setMode() (display-protocol get_modes/set_mode, forwarded to
the backend) — the client-facing API.
- EDID: the driver negotiates VIRTIO_GPU_F_EDID when the device offers it, reads the monitor's
EDID, and logs its preferred mode (parsed from the first detailed timing descriptor).
- vsync: every resource_flush is fenced (VIRTIO_GPU_FLAG_FENCE); the device signals the fence
when the frame is on screen, which the used-ring ack the synchronous present already waits
on gates — so a completed present is a tear-free one.
After the native upgrade the compositor runs a one-shot mode-set self-check: query the modes,
switch to a different one, re-composite, and confirm the backend reports the new geometry —
the gate's markers.
Gate: python3 test/qemu_test.py display-modeset (reuses the display-native boot) — "display:
mode set to 800x600, verified" + "display: vsync present ok", passing 3/3. host tests,
display-service, display-demo, shm, virtio-gpu, and display-native still pass.
The first native scanout backend's driver half. The device manager matches the
virtio-gpu PCI function by its Display/Other class triple and spawns the driver,
which claims the device, confirms vendor 0x1AF4/device 0x1050 from config space,
enables memory-space + bus mastering, and walks the virtio vendor capabilities to
find the common-config and notify structures in its BAR.
From there it is the standard modern-virtio bring-up: reset, negotiate VERSION_1,
stand up the control virtqueue in coherent DMA, then drive the GPU end to end —
RESOURCE_CREATE_2D, ATTACH_BACKING (a coherent DMA buffer; V4 swaps in the shm-
shared surface), SET_SCANOUT, paint a known pattern, TRANSFER_TO_HOST_2D,
RESOURCE_FLUSH, and wait for the device's used-ring ack. Reading the backing back
proves it is CPU-visible RAM; the ack proves the device consumed the frame —
together the automated stand-in for "it's on screen", no screenshot.
- system/drivers/virtio-gpu/: the driver, plus virtio-gpu-protocol.zig (control
commands) and virtio-pci.zig (the 1.0 PCI transport + split-virtqueue), both with
host-tested struct sizes.
- device-manager matches the display/other class triple to "virtio-gpu"; the driver
self-confirms the vendor/device id, since the class alone cannot distinguish it.
- ServiceId.scanout (11): the driver registers it so the compositor finds it in V4.
Gate: python3 test/qemu_test.py virtio-gpu (QEMU -device virtio-gpu-pci) — the
device-manager stack discovers the function, the driver brings up a 640x480 scanout
and flushes a test pattern: "virtio-gpu: scanout 640x480 online" + "flush acked,
pixel check ok". host tests, display-service, shm, and device-list still pass.
Note: the pre-existing pci-scan case triple-faults on main (verified at 88ad432,
before this change); it is unrelated and tracked separately.
Daniel Samson