Commit Graph

9 Commits

Author SHA1 Message Date
Daniel Samson 3cc1d38dd0
The device manager supervises: hello, backoff, and the crash-loop cap (M18.1)
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
2026-07-13 00:19:30 +01:00
Daniel Samson 650a1b1595
Signals over IPC, one-shot timers, and the service harness (M17.4)
Signals are statements delivered as coalescing notifications to the
endpoint a process nominates with signal_bind — never a hijacked stack,
never a question (liveness is the zero-length ping the harness answers).
process_signal is supervisor-or-self gated, like kill; unbound targets
accumulate a pending mask delivered on bind. timer_bind is the missing
timed wait: a one-shot deadline landing in the same replyWait as
everything else — what stop(), hello deadlines, and restart backoff are
built from. runtime.service.run folds requests, signals, and
notifications into callbacks; the VFS conversion deletes its hand-rolled
loop and gains the whole lifecycle contract. The signals scenario drives
ping, reload, terminate->exited, the timer, and the deaf-child
deadline->killed path from ring 3. docs/process-lifecycle.md increments
1-4 are now as-built.
2026-07-12 23:53:38 +01:00
Daniel Samson c7b17aaa0e Merge branch 'main' into claude/input-module-keyboard-events-379361 2026-07-11 20:28:21 +00:00
Daniel Samson 65244e3103
Add input module: broadcast keyboard events over IPC
Programs can now subscribe to keyboard events (key_down/key_up/key_press)
and drivers can broadcast them, through a new user-space input service.

The delivery model is forced by danos IPC: a synchronous rendezvous holds
one pending reply, so a server cannot park N subscribers blocked in a
"wait for next event" call — delivery must be push. But a synchronous push
has no timeout and the kernel never wakes a sender parked on a dead peer's
endpoint, so one dying subscriber would hang all input. So this lands the
roadmap's planned asynchronous buffered send and builds the service on it:

- ipc_send (syscall 26): non-blocking post to an endpoint's bounded payload
  ring, delivered through reply_wait as a buffered message (notify_message_bit).
  A full ring drops the oldest. It can never hang on a dead/slow peer.
- input-protocol + runtime.input helpers (subscribe/next, connectSource/
  publish) — the first real consumer of M13 capability passing: a subscriber
  hands the service its own endpoint as a capability.
- input service (fan-out via ipc_send, dead-subscriber pruning), a synthetic
  input-source, and input-test; the ps2-bus keyboard driver publishes to it.
  Real IRQ1 scancode decoding (which must live in the bus, the PNP0303 owner)
  is a documented follow-up; the source is synthetic for now.
- build/init wiring, an `input` QEMU case, and docs/input.md.

Full QEMU suite 48/48, including the new input case and every IPC/endpoint
regression (ipc, ipc-call, ipc-cap, vfs, hpet, bus, irqfree).
2026-07-11 15:03:24 +01:00
Daniel Samson 75ccfff171
Pass arguments to main via runtime.process.Init, dispatched on signature 2026-07-11 14:22:48 +01:00
Daniel Samson a5fe63c1dd
Pass argv to processes on a SysV entry stack; grow the user stack to 32 KiB
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.

The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).

Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
2026-07-11 08:33:12 +01:00
Daniel Samson 125a3b4993
M14b: DMA memory (dma_alloc / dma_free)
An HCD programs a bus-master engine: it needs a descriptor ring that is physically
contiguous, at a physical address it knows, uncacheable, and pinned. mmap gives none
of those. Add dma_alloc(len, flags) -> vaddr (rax), paddr (rdx) and dma_free(vaddr,
len): grant contiguous, zeroed, pinned, strong-uncacheable memory in a per-process DMA
arena (PML4[228]) and hand back both addresses.

Pieces: pmm.allocContiguous(count, max_phys) finds a run of contiguous free frames
below a cap (dma_below_4g for 32-bit engines); mapUserDmaInto maps them uncacheable
(PCD|PWT) but WITHOUT device_grant, so unlike an MMIO grant these frames are real RAM
and freeSubtree returns them on teardown — a driver that dies leaks nothing. dma_free
is bounded to the DMA arena so it can never unmap the caller's stack/heap/MMIO.
dma_write_combining is accepted but falls back to coherent (WC needs PAT programming).

Runtime: runtime.dma.alloc/free (a two-return-value stub, like replyWait). New `dma`
kernel test drives the mechanism directly — contiguity, the below-4G cap, coherent
mapping, and reclaim-on-teardown (no leak). The thin syscall wrappers follow the tested
mmap/mmio_map shape and land their first real use with the first DMA driver. Suite
38/38 plus host tests.
2026-07-10 19:43:59 +01:00
Daniel Samson ceacc6b514
Post-reorg cleanup: POSIX layer, and naming fixes
Follow-up to the monorepo re-org. Suite 35/35 plus host tests green.

POSIX compatibility is now its own library, library/posix/ (unistd, stdio),
layered strictly over the runtime — it calls the runtime's IPC/heap, never
system calls directly. The runtime is now POSIX-free (the danos-native
application ABI). The VFS wire protocol is danos-native throughout
(Stat -> FileStatus, .stat -> .status, O_CREAT -> create); the POSIX layer
maps the POSIX spellings at the boundary. The coding standard's ABI-name
exception is scoped to one place: a file is allowed POSIX spellings only if it
lives under library/posix/ — everywhere else, danos naming with no exception.

Naming fixes, all mechanical:
- initrd -> initial-ramdisk: the source file, the module, the tool
  (make-initial-ramdisk.py), the artifact (initial-ramdisk.img, including the
  bootloader's load path), and the identifiers.
- system/kernel/device-service.zig -> devices-broker.zig: it is ring-0 kernel
  code (the trusted device table + claim capability), not a ring-3 service. The
  future user-space device *manager* (policy) will live in system/services/.
- Dropped the daemon `d` suffix: hpetd -> hpet, busd -> bus. A driver lives in
  system/drivers/, so the folder already says what it is; encoding the role in
  the name too is redundant. The coding standard drops that exception.
- system/devices/aml/interp.zig -> interpreter.zig (the type was already
  Interpreter).
2026-07-10 13:33:06 +01:00
Daniel Samson 8754d4e46a
Re-organize the source tree as a monorepo mirroring the FHS
The source layout now mirrors the runtime filesystem hierarchy
(docs/danos-file-system-hierarchy-FSH.md): what lives under system/ in the
source is what a running danos represents under /system. Each service and
driver is a sub-project directory that is its own Zig module — cross-project
references go by module name, never by a path into another project's files.

Moves (all git mv, history preserved):
- src/            -> system/            (danos internals; the self-representation)
    root.zig      -> danos.zig          (the kernel<->user contract module)
    kernel/arch/  -> kernel/architecture/   (arch -> architecture)
    device/       -> devices/           (what /system/devices reflects)
    boot/         -> /boot              (the loaders, top level)
- sbin/           -> split by role:
    init, vfs     -> system/services/<name>/<name>.zig
    hpetd, busd   -> system/drivers/<name>/<name>.zig
    vfs-test      -> system/services/vfs/vfs-test.zig  (inside the vfs project)
- lib/            -> library/runtime/   (room for other libraries beside runtime)

The VFS wire protocol becomes its own module, system/services/vfs/protocol.zig
("vfs-protocol"): the vfs sub-project exposes its interface, and the runtime's
file layer imports it by name. First instance of the "protocol module" pattern
(docs/driver-model.md); usb/block will expose theirs the same way.

Also: fix a naming-standard violation in the protocol — Op -> Operation (and
req -> request, _pad -> _padding). Docs updated: /system/services added to the
FHS doc, a repository-layout section added to the docs index, and stale source
paths swept across comments and docs.

Runtime boot paths are unchanged (the bootloader still loads /sbin/init);
aligning the runtime filesystem to the FHS is a separate follow-up. Suite 35/35
plus host tests green.
2026-07-10 12:55:56 +01:00