Three services had each written the same thing and got it three different
ways: input polled the process list to notice a dead subscriber, and only
when someone else subscribed; the power service never noticed at all; the
device manager noticed drivers but not subscribers. The harness owns the
table now, driven by the events a protocol declares — it registers on the
reserved verb, frames each event once, posts to everyone interested without
waiting on any of them, and reclaims a slot when the kernel says its owner
died. Interest masks moved to the envelope, so a subscriber that wants only
mice asks the same way everywhere.
Two consequences the plan had not foreseen. The device manager now hears a
supervised child's death twice, once as its supervisor and once as a
subscriber, so restart backoff counted every crash twice and gave up after
half as many; it retires the id before counting. And the kernel's published
exit table had eight slots for what is now six subscriptions in a plain
boot, so it holds sixteen.
The other half is a hole the design named early and left standing: a
backend handed out a small integer and then honoured it from anyone. A
process that guessed a file's node id read another client's file; a display
layer had no owner at all, so any client could reconfigure or destroy any
layer; a USB device token was never checked against the client that opened
it. Each is now bound to the task that opened it, and a wrong owner gets
exactly what an unknown id gets — the refusal must not become the oracle
the identical answers elsewhere were designed to remove. Closing a file
changed with it: it used to succeed unconditionally, which would have told
a caller which ids existed.
Suite 111/111, with a new case in which one process holds a file and a
layer, hands both ids to a second process, and finds them untouched after
that process has tried everything with them.
These were the awkward ones. Each began with an operation packed into a
single byte — two of them with a version wedged in beside it — so there was
no wrapping them: the layouts had to be rebuilt. The device manager's own
enumerate and subscribe become the reserved verbs that mean the same thing
everywhere, its replies lose three status structs the envelope already
carries, and a device id becomes the packet's target. Power drops the
version it repeated on every request, because describe is the handshake,
and stops claiming a 64-byte ceiling it never needed for calls. USB moves a
control transfer's data to the packet tail in both directions, which makes
the status length the transferred length and retires a field that had been
saying the same thing twice.
The danger in this one was not the protocols but their readers. Init
recognised a power button by two bytes at the head of a message, the ACPI
service dispatched on the first byte, the xHCI driver read its operation
with a raw integer load, and the HID drivers reinterpreted a report
wholesale — none of which would have failed to compile once the layouts
moved. They would simply have stopped: no shutdown on the power button, no
reports from the keyboard. Every one of them now reads through the
generated types, and the shutdown gate that answers only a subscriber is
the same code it was.
Two sizes were decided by measuring rather than assuming. The child-added
message is both a request and the event broadcast to subscribers, and
alignment rounds it to 48 bytes, which puts its packet exactly on the
64-byte push floor — a test pins that, because a field added carelessly
would now overflow it. The interrupt report gives up eight bytes of inline
room to make space for the header; the two drivers that produce reports
send eight and four.
Suite 110/110.
A protocol is reached by name now, not by a compile-time integer. Init is
PID 1 and already knows which binary it started, so init serves /protocol
as a vfs backend: bind claims a contract with the provider's endpoint
attached, open answers with that endpoint as the reply's capability, and
readdir lists what is bound with the task and binary behind it. The kernel
reserves the prefix — nothing may mount over it, under it, or unmount it —
and ServiceId, ipc_register and ipc_lookup are gone, their syscall numbers
left vacant.
A bind is authorized by who the caller *is*: the kernel-stamped binary
together with the supervising task's identity, matched against
/system/configuration/protocol.csv. Identity, not spelling — spawn is
ungated, so an attacker can run any bundled binary, and a name-only rule
would have let it launder grants through an init of its own making. A name
a live process holds is refused to everyone else; a dead one's is released.
Three review rounds against a hostile ring-3 process found what 108 green
tests could not, because the suite contains no attacker. Publishing init's
supervision endpoint as the registry put PID 1's mailbox in every process's
hands, where two forged bytes reached the shutdown path: privileged traffic
is now believed only from the task that holds the contract it speaks for.
A capability arriving on a request outlived every path that ignored it,
one handle per call until the table was full — in init, and in the harness
ten services share — so the arriving capability is owned by the turn and
released unless a handler says otherwise. And the kernel let anyone holding
an endpoint handle aim signals, timers, exit notices and interrupts at it:
binding now requires having created it.
Suite 108/108. The new protocol-registry case asserts eleven properties,
each one an attack that must fail.
/etc/init.csv and /etc/devices.csv become /system/configuration/*.csv (the
repo's etc/ moves to system/configuration/, mirroring the runtime tree),
/var/log becomes /system/logs, and /mnt/usb becomes /volumes/usb. The
kernel VFS gains a carve-out so FAT may serve exactly /system/configuration
and /system/logs beneath the initrd-backed /system while /system and /test
themselves stay unshadowable; FAT's single /var mount splits into those two
rewritten mounts. The kvfs readdir check learns /system's third child and
the ramdisk spawn sweep skips the configuration tree.
Suite 106/106.
display-client and input-client (files and module names), so a service,
its wire contract, and its client never share a name: `display` the
service, `display-protocol` the contract, `display-client` a program's
view of it. The nine consumers' imports and their packages' declared
lists follow (regenerated from the source scan); build-support's
module_homes table carries the new names.
Replaces L2's interim DMA pool (every buffer reachable by every claimed
device) with true per-grant confinement: a device reaches only buffers
whose capability was delegated to its driver.
Kernel:
- DmaRegionObject (handle kind 2): a delegation token naming a dma_alloc'd
region, passable across processes on the IPC cap slot like an endpoint
or shared-memory object. Frames stay owned by the allocating address
space (freed on dma_free/teardown as before); the token carries a `dead`
flag so a stale downstream handle can no longer bind a freed region.
- dma_alloc gains the dma_shareable flag: it returns a capability handle
in r8 and every region is tracked in a registry. A task's own regions
auto-bind into the devices it claims (its rings just work); foreign
buffers are bound explicitly.
- dma_bind / dma_unbind / handle_close syscalls (51-53). dma_bind maps a
held region (or shared-memory) capability into a claimed device's domain;
it is idempotent. handle_close reclaims a table slot (raised 16 -> 32).
- dma_free and task death unmap a region from every domain and invalidate
BEFORE its frames return to the allocator — the stale-IOTLB use-after-
free window, closed structurally.
Protocols (flag-day): block gains attach, usb-transfer gains dma_attach —
each carries a region capability on the cap slot. fat allocates its bounce
buffer shareable and attaches it; usb-storage allocates its transport
buffers shareable, attaches them to the controller, and forwards fat's
capability downstream; usb-xhci-bus binds and closes; virtio-gpu binds its
shared scanout surface. The physical addresses on the wire are unchanged
(identity IOVA), so no register-programming code moved.
Cross-process DMA (fat -> usb-storage -> xHC) now flows only through
delegated capabilities. iommu-usb-storage / iommu-usb-hid / iommu-fault
all green under per-grant enforcement; 104/104 overall (fail-open paths
unchanged).
library/device/pci is now the complete generic floor a leaf PCI driver
needs, instead of just what virtio-gpu used:
- pci-class: capability IDs, MSI/MSI-X/power-management/PCI-Express
register layouts, extended-capability header decode (host-tested),
per-bit command constants, remaining header offsets.
- pci.Function: header accessors, disableBusMaster + interrupt-disable
helpers, findCapability, programMsi/disableMsi, MsiX vector-table
struct, ensurePowerStateD0, functionLevelReset (BAR save/restore),
extended-capability iterator.
Proven by the new pci-caps QEMU case: a pci-cap-test fixture claims an
extra e1000e (PM+MSI+PCIe+MSI-X, no danos driver) and readback-verifies
every surface, including the first driver-side use of msi_bind.
usb-xhci-bus converts from 8 ms event-ring polling to message-signalled
interrupts: plain MSI where offered (real Intel xHC), MSI-X entry 0
otherwise (qemu-xhci has no MSI capability), byte-identical polling as
fallback. The timer survives as a 250 ms port-reconcile/lost-edge tick —
real-hardware USB2 hub debounce still needs it. MSI setup runs BEFORE
controller bring-up: QEMU's xhci only registers the MSI-X vector as used
when IMAN.IE is written while MSI-X is already enabled; interrupts are
silently dropped otherwise (real hardware does not care about the order).
101/101 QEMU cases green; real-hardware smoke passed (mouse works,
boot 2026-07-23T174805Z, plain-MSI branch, vector 33).
Each bus's discovery line now prints the device's would-be /etc/devices.csv row
(bus, base, class, prog_if, vendor, device, subsystem / hid) in uppercase hex,
followed by the human-readable names — so a row for a new driver reads straight
off the boot log, for pci, usb, and acpi alike.
- pci-bus: logFunction moved to registerAndReport (where vendor/device/subsystem
are read from config space) and reformatted to columns + names; subsystem
prints '*' when the function has none. Read unclaimed via the bridge ECAM, so
no per-function claim is needed.
- usb-xhci-bus, acpi: the same column framing on their existing discovery lines.
- qemu_test.py: the acpi-ps2 and acpi-report regexes updated to the new ACPI
format (both verified passing in QEMU).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KJqSiLLchDUUCoXn5jsiwd
Replace the three hardcoded switch tables (pciDriverForIdentity, hidDriverFor,
usbDriverForIdentity) with an authoritative, human-readable device registry the
manager reads at boot. Matching is most-specific-wins across
base/subclass/prog_if/vendor/device/subsystem/hid, so a precise vendor:device
rule and a generic class rule coexist; an unmatched device is logged, never
guessed. This resolves docs' "matching stays code until the third bus".
- ABI: child_added and DeviceDescriptor gain vendor/device/subsystem; child_added
gains a bus discriminator (BusKind) so PCI and USB class triples match against
the right namespace.
- pci-bus reads vendor/device (config 0x00) and subsystem (0x2C, type-0) and
reports them.
- library/device/registry: freestanding CSV parser + matchDriver() with
specificity scoring; 5 unit tests wired into `zig build test`.
- etc/devices.csv bundled into the initrd; the kernel serves /etc directly, so
the manager reads it before any filesystem service is up (fat starts later).
- virtio-gpu: drop the now-redundant post-spawn 1AF4:1050 re-confirm, since the
registry binds this driver by exact identity.
- Remove the orphaned system/drivers/display driver (unreferenced by build or
registry).
- docs: new devices-csv.md; device-manager.md "matching stays code" resolved.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KJqSiLLchDUUCoXn5jsiwd
Every user binary and the two device-logic library modules (pci, usb) now
`@import` the concern modules directly instead of aliasing through `runtime`:
runtime.ipc/process/time/service/input/block/display -> @import("<module>")
runtime.device / runtime.device_manager -> @import("driver")
runtime.fs -> @import("file-system")
runtime.Thread -> @import("thread").Thread
runtime.system.{write,writeRecord,klog*} -> logging.*
runtime.system.{sleep,timerOnce,wallClock,clock} -> time.*
runtime.system.{spawn*,kill,exit,yield,processes,...}-> process.*
runtime.system.{mmap,munmap,PROT_*} -> memory.*
runtime.dma.* / runtime.shared_memory.* / runtime.allocator -> memory.*
Each consumer keeps its own alias name (e.g. `const device = @import("driver")`),
so call sites are unchanged and there are no collisions with local `driver`
variables. build.zig now injects the concern modules into every user binary via
`default_imports`; pci/usb module import lists were updated to match.
The `runtime` and `system` shims remain for one more step (root.zig still uses
runtime); they are deleted in C5. Nothing but root.zig imports `runtime` now.
Verified: zig build, zig build test, and 17 QEMU cases (smoke, device-manager,
logger, fat-mount, fat-mutations, usb-storage, usb-hid, display-native,
virtio-gpu, input, thread-spawn, thread-mutex, process-kill, shared-memory,
driver-restart, acpi-ps2, pci-scan).
Finish the direct-import convention: a protocol is now aliased to its module
name in snake_case in every file that imports one — consumers and the runtime
client wrappers alike. This kills the last of the alias variety (the generic
`protocol`, plus `power` and `transfer`), so `device_manager_protocol.Hello`
means the same thing everywhere and grepping a module name finds all its uses.
Pure rename (identifier uses only; prose references left untouched via a
guarded pattern). 14 files, 299/299 lines.
zig build + test green; 16 QEMU cases pass (smoke, device-manager,
driver-restart, device-list, pci-scan, usb-hid, usb-storage, display-service,
display-native, display-reattach, input, acpi-ps2, vfs, fat-mount,
power-button, orderly-shutdown).
device-manager-protocol -> library/protocol/device-manager/. Its consumers
(pci-bus, usb-xhci-bus, the acpi discovery service, device-manager, device-list,
crash-test, and the not-yet-built intel-integrated display sub-driver) import the
module directly instead of through runtime.device_manager_protocol, which is
deleted. runtime.device_manager (the hello client) already imported the module
by name and is unchanged.
zig build + test green; device-manager, driver-restart, device-list, pci-scan pass.
Every supervised driver owes the device manager a hello at startup, and
the retry-lookup-call-check for it had been copied into five drivers:
usb.helloManager (misfiled in the USB client) plus hand-rolled twins in
display, virtio-gpu, pci-bus, and usb-xhci-bus.
Extract it once as a runtime client, runtime.device_manager.hello(role,
device_id) ?Handle — returns the manager endpoint (bus drivers keep it to
report children through), null when there is no manager or it refused the
handshake, and logs the outcome itself so each call site is one line.
Also correct two roles while collapsing their calls: virtio-gpu and the
display driver each claim one PCI function and report no children, so they
are Role.device, not Role.bus. The manager ignores role today, so this is
cosmetic, but it matches the protocol's own definition (bus = reports
children via child_added).
Behavior-preserving otherwise: pci-bus and usb-xhci-bus move their hello
logging from raw serial writes to std.log, which the kernel renders with
the same "<path>: " prefix, so driver-restart still matches
"usb-xhci-bus: hello acknowledged". zig build clean; 8 QEMU cases pass
(driver-restart, pci-scan, usb-hid, usb-storage, virtio-gpu,
display-reattach, device-list, device-manager).
The compound-hub investigation is resolved (Keychron keyboard + ROG
mouse enumerate through the Genesys USB2 companion hub and type on real
hardware). Turn the debugging spam back down for main: the full 22-port
PORTSC dump runs only when a scan finds NOTHING (a 'why is this empty'
aid), not every boot; a downstream hub port logs only when a device
actually appears or leaves, not for every empty seed-sweep port. The
readable device names, class names, and port-change events stay.
Make the USB diagnostic logs scannable by eye:
- usb-ids gains speedName + linkStateName (USB3 PORTSC link states: U0,
RxDetect, Polling, ...), host-tested with usb-ids.
- The PORTSC dump decodes the register instead of printing hex flags:
PORTSC[3] 0x00021203: connected, enabled, link=U0, power=on, SuperSpeed
PORTSC[5] 0x00020ee1: connected, disabled, link=Polling, power=on, High-speed
(the raw word stays for reference). A USB2 device reads connected+
disabled+Polling until reset — so the user's next log shows at a glance
whether the companion port ever reaches that state.
- The library reads STRING descriptors (readString, UTF-16LE -> ASCII,
English langid), and the device line now names the maker + product:
port 5 device: Hub "Genesys Logic USB3.0 Hub" (0x05e3:0x0626), 1 interface(s)
instead of a bare vendor/product id pair.
Full USB case set green (hub regexes follow the new 'device: <class>
"<maker> <product>"' format). Branch diagnostics for the SuperSpeed
compound-hub investigation.
The logs read 'class 9/0/0' where they could say 'Hub'. usb-ids gains
className (a device/interface class byte -> 'Hub', 'HID', 'Mass Storage',
...) and interfaceName (a HID boot interface -> 'HID boot keyboard' /
'HID boot mouse'), both host-tested with usb-ids. The bus driver's
enumerate + register lines now read, e.g.:
port 21 device: Hub vendor 0x05e3 product 0x0626, 1 interface(s)
port 21 interface 0: Hub (9/0/0) registered as device 47
port 5 interface 0: HID boot keyboard (3/1/1) registered as device 32
so a real-hardware log is scannable by eye. Full USB case set green
(hub regexes follow the new 'device: <name>' format).
Real-hardware root-cause: the user's keyboard works in the firmware boot
menu but dies under danos. The port dump shows why — danos scans the
root ports ~3 ms after the controller reset, but a USB2 connection needs
~100 ms to debounce, so the boot scan sees the USB2 companion hub's port
empty (all USB2 ports ccs=0), while the SuperSpeed devices (hub, storage)
train instantly and DO show up. danos then relied on a Port Status
Change EVENT to catch the late USB2 connection, which does not fire
reliably on this hardware.
The tick now polls every root port and reconciles on the empty->connected
EDGE (previous-state tracked per port, seeded from the boot scan so
already-up ports never re-fire), bringing up a device that appears after
the scan without depending on the event. Edge-triggered so a port that
fails to enumerate is not retried every 8 ms. Branch-only until the
keyboard is confirmed on real hardware; the diagnostic dumps stay for
the next boot.
The USB2 companion hub carrying the user's full-speed keyboard never
appears — only the SuperSpeed hub (port 19) and SS storage (port 21)
connect. To find where the USB2 root ports are and whether the companion
is presenting on one, walk the xECP Supported Protocol capabilities
(logging each USB 2.0 / 3.0 root-port range) and dump every port's raw
PORTSC unconditionally (ccs/ped/pls/pp/speed). QEMU confirms the dump
(USB2 ports 5-8, USB3 ports 1-4). Branch-only diagnostic.
Branch-only debugging for the real SuperSpeed compound hub: the spin fix
(27f87cb) stopped the hang — the SS hub's 4 SuperSpeed ports now enumerate
(all empty, correct: the full-speed keyboard isn't a SuperSpeed device) —
but the USB2 COMPANION hub, where the keyboard actually lives, never
appears. Only root ports 19 (SS hub) and 21 (SS storage) connect.
Dump every root port's raw PORTSC at scan (connect/enable/link-state/
speed) and log every root port-change event, so the next boot shows
whether the companion is connected on a USB2 port we misread, connects
late as a port-change event, or is simply absent. Diagnostic logging —
to be removed once the companion path works.
Real-hardware finding: a SuperSpeed hub (the user's Genesys, 4 SS
downstream ports) HUNG the bus driver at boot — it stopped logging with
no fault, and the hub's port power dropped. Cause: a SuperSpeed hub has
change bits a USB2 hub lacks (link-state, BH-reset), and the B4 servicing
— written and tested against QEMU's USB2 hub — never cleared them, so
the hub's status-change endpoint re-reported the same port forever and
the driver spun servicing it, never reaching the USB2 companion hub
where the full-speed keyboard actually lives.
hubPortStatusAck now clears the SuperSpeed-only change features too
(gated on hub speed; a USB2 hub is unaffected), and the tick services a
bounded batch of hub changes (32) before yielding — so even if a hub's
change bits misbehave, the driver cannot spin the machine. A per-port
status log line surfaces exactly what a hub reports, so the next real
boot shows the SS hub's port states and whether the USB2 companion
enumerates. QEMU usb-hub cases still green (the SS clears are gated off
for QEMU's USB2 hub).
Completes hub support (docs/usb-hub.md). On the bus tick, a downstream
hub-port change now dispatches: a connect enumerates the new device
(B4b), a disconnect tears the old one down — recursively, since a hub
that leaves takes its whole subtree with it (children first), reporting
each interface ChildRemoved and Disable-Slotting the device. Route
strings compose across tiers, so a device two hubs deep enumerates with
a two-tier route.
QEMU's hub — unlike root-port hot-plug — DOES raise downstream
status-change events, so both paths are harness-tested: usb-hub (a
keyboard behind a hub binds usb-hid-keyboard), usb-hub-nested (a
keyboard two hubs deep), usb-hub-unplug (device_del behind the hub tears
it down). Full suite 91/91.
Real-hardware validation of the user's SuperSpeed Genesys hub with
full-speed devices on its USB2 companion is flagged for the user (QEMU's
USB2 hub does not model the compound USB3 hub).
The core of hub support (docs/usb-hub.md): a device on a hub's
downstream port now reaches its class driver exactly like one on a root
port. The hub's interrupt status-change endpoint is armed with an
in-process subscription — completions set the hub's pending-port mask
instead of queuing a class-driver report — and setupHub seeds every
downstream port pending so a STATIC topology (a device present at
power-on) enumerates without waiting on the initial interrupt edge.
On the bus tick, each pending hub port is serviced: GET_STATUS + clear
the change bits, and on a connect reset the port, read the speed, then
enable a slot and Address Device with the composed route string
((parent_route<<4)|port), the inherited root port, and the parent hub's
slot/port as the TRANSACTION TRANSLATOR — so the controller routes a
full/low-speed device's split transactions through the hub's TT. The
device then enumerates and registers its interfaces through the normal
path (a compact topology-unique port key keeps the id tag within its
8-byte cap), recursing setupHub if it is itself a hub.
Verified in QEMU (a keyboard behind a USB2 hub on a second controller):
'hub slot 1 port 1 device vendor 0x0627 ... usb-hid-keyboard: ok
(device 35)'. Full suite 89/89. The user's SuperSpeed Genesys hub +
full-speed keyboard/mouse on its USB2 companion is the real-hardware
target, flagged separately.
First slice of hub support (docs/usb-hub.md), handled IN the xhci-bus
because a device behind a hub is reached by the CONTROLLER via a route
string in its slot context — topology only exists inside the driver
that owns the controller. When the scan enumerates a class-9 device it
now calls setupHub: read the hub descriptor for the downstream port
count and TT arrangement, tell the controller the slot is a hub
(Configure Endpoint with the slot add-flag sets the Hub bit, Number of
Ports, and MTT/TT-Think-Time per xHCI 4.6.6), SET_HUB_DEPTH for a
SuperSpeed hub so it can compose route strings, and SET_FEATURE
PORT_POWER every downstream port.
The Device gains topology fields (route string, root port, parent hub
slot/port for the TT) and buildAddressInputContext now fills them, so
the Address Device path is ready for downstream devices — those are
enumerated in B4b. A root-port device gets route 0 and its own port as
the chain root, unchanged behavior.
Verified in QEMU with a hub on a second controller and a device behind
it (a usb-hub QEMU case, since the boot controller's auto-assigned
devices collide on the low ports): 'hub slot 1: 8 downstream ports
powered (USB2 single-TT)'. Full suite 89/89. The user's SuperSpeed
Genesys hub is the real-hardware target, flagged separately (QEMU's
USB2 hub doesn't model the compound USB3 hub).
B3 — the runtime lifecycle a hot-pluggable bus needs, plus two init
fixes that runtime device arrival depends on:
- pump() now handles PORT STATUS CHANGE events (silently dropped
before): it queues the port, and the bus driver brings the port up
(a device arrived) or tears it down (a device left) on its tick —
reporting each interface ChildRemoved to the device manager, which
prunes the node, notifies watchers, and lets the class driver's world
end honestly, then Disable Slot frees the controller-side state.
- ALL root-hub ports are powered at init, not just those with a
boot-time device: an unpowered port (PP=0) cannot signal a later
connect, so a hot-plug would never be seen.
- the interrupter is enabled (IMAN.IE + USBCMD.INTE) while the ring
stays polled — some controllers only WRITE runtime events to the
ring when the interrupter is enabled.
Real-hardware validation is flagged for the user: QEMU's qemu-xhci does
not raise a runtime port-change event to a polling driver on device_add,
so the end-to-end hot-plug path can't be exercised in the harness (the
port-change handling itself IS proven — a late boot device's PSCE is
caught and acked). The harness gained qmp_sequence (multi-step QMP
injection with arguments) for when a drivable case exists. Full suite
88/88; the working USB path (enumeration, HID, storage) is unregressed
by the port-power and interrupter changes.
library/runtime/log.zig wires std.log to the tagged ring: the root shim
installs std_options for every binary (programs may override), logFn
formats one line per record and emits it with its level via
debug_write — the payload no longer carries the process's name; the
kernel stamps identity structurally and the serial renderer prints the
'<binary path>: ' prefix, so the transcript keeps its shape.
Migrate every writeLine/logLine/log helper family (init, vfs, fat,
device-manager, acpi, pci-bus, ps2-bus x3, usb-hid x2, usb-storage,
usb-xhci-bus, virtio-gpu — 104 call sites) to std.log.info, dropping
the hand-written prefixes. A leveled record is a complete line by
contract (raw emissions may still build lines from pieces). Test
fixtures and the display/input services keep raw writes for now — their
ring records are attributed by the kernel regardless.
Harness regexes follow the renamed prefixes (usb-hid-keyboard,
discovery) and path-named restart lines.
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
The root-hub scan logged the raw PORTSC port-speed class ("speed class 3").
Decode it to a human name — Low/Full/High/SuperSpeed/SuperSpeedPlus with the
USB generation and line rate — so the boot log says what enumerated on each
port, the USB analog of the pci-bus class line. This is the link speed only;
the device class/subclass/protocol needs descriptor reads (the USB track).
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
child_added/child_removed join the device-manager protocol. The driver
maps its register BAR (resource 0 is the ECAM config space; the walk
starts at 1), reads CAPLENGTH and HCSPARAMS1, and reads one PORTSC per
port: the connect bit and speed class come straight from hardware, no
rings needed to see the devices. The manager mirrors reported children
keyed by (parent, port), remembers which instance reported each, and
prunes a dead reporter's children before deciding the restart — the
children describe protocol state that died with the process. The
usb-report scenario drives the whole loop: two QEMU devices reported,
reporter killed, children pruned, driver respawned with backoff, and the
new instance re-claims, re-scans, and re-reports.
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
Daniel Samson
Daniel Samson