Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The QMP harness channel, the SCI + power button published from ring 3,
Notify/GPE dispatch in the AML interpreter, and orderly shutdown — init's
M17 stop cascade into a ring-3 S5 write. Proven by injecting a real ACPI
power-button event; QEMU powers off through the whole chain.
# Conflicts:
# system/services/init/init.zig
The capstone. init becomes a real supervisor: it spawns its boot
services supervised against one endpoint that also carries its signals, a
re-arming heartbeat timer, and the power events it subscribes to. On the
power button (or a terminate signal — same path) it logs the shutdown,
runs the M17 stop sequence over its children in reverse spawn order
(vfs last), then asks the power service for S5.
The acpi service honors a shutdown request from a power subscriber — init
is the one subscriber, a soft gate that stands in for 'only the system
supervisor may power off' and, unlike a PID-1 check, survives the test
harness where the kernel's idle tasks take the early ids. The power
service is mechanism (write S5); deciding when to shut down and stopping
everything else first is init's policy — the microkernel split applied to
poweroff.
The orderly-shutdown scenario injects a real QMP power-button event and
watches the whole chain compose: button pressed -> init shutting down ->
entering S5 -> QEMU powers off. That single scenario proves the M17
lifecycle and the M21 event side compose into a clean shutdown. Suite
60/60.
The AML interpreter now handles the Notify opcode (0x86, previously
unhandled): it resolves the target device, evaluates the code, and
records the pair in a bounded per-evaluate queue the caller drains with
takeNotifications. A host unit test with hand-encoded AML — a method that
issues Notify(DEV_, 0x80) — proves the device and code come back; aml.zig
joins the zig build test loop so the interpreter is covered on the host.
The acpi service's SCI handler now services general-purpose events too:
for each set-and-enabled GPE bit it evaluates the \_GPE._Lxx (level) or
_Exx (edge) handler method, drains the Notify queue that produced, and
publishes a domain event per notified device — PNP0C0A battery, ACPI0003
AC, PNP0C0D lid, else generic notify — then clears the status bit and
acks. The embedded controller's _Qxx queries are out of scope (hardware
track). QEMU raises no GPEs on this config, so the QEMU suite is the
regression net (the power button still works with GPE servicing in the
path); correctness is the unit test. Suite 59/59.
The kernel publishes the FADT as one more acpi-tables memory resource
(tagged by its intact FACP header — the AML blobs are header-stripped);
the acpi service reads the PM1 event/control and GPE register ports from
that copy, so the kernel's own FADT parse is untouched. A power-protocol
module (ServiceId.power = 5, domain-named so an ARM PSCI service can serve
the same id) carries subscribe / shutdown / events.
The acpi service converts to runtime.service.run — device discovery, the
.power protocol, and the SCI notification all fold into one loop. At
startup it enables ACPI mode if SCI_EN is clear (the SMI dance), binds the
SCI (found as the node's len-1 irq resource, distinct from the broad
window), and sets PWRBTN_EN. On the SCI it reads PM1_STS, clears
PWRBTN_STS write-1, logs the press, publishes power_button to
subscribers, and always acks. The power-button scenario proves it with a
real QMP system_powerdown injected mid-run through the M21.0 channel.
Two related changes to make device identities legible in the boot log and in
the code that matches on them.
Logging: the pci-bus driver decodes each function's class/subclass/prog-IF
triple to human names (via the existing pci-class module), and the acpi
service appends each _HID's human name (via acpi-ids) to its report line. So
"class 0x01 (Mass Storage Controller) subclass 0x06 (Serial ATA Controller)
progif 0x01 (AHCI 1.0)" reads straight off the log when writing a driver.
Naming: a new coding standard ("Named values, not magic numbers") says a value
with meaning gets a name, prefer an enum for value sets. Applied:
- pci-class is refactored from u8-switch tables into a BaseClass enum plus
per-class SubClass/ProgIf enums with name() methods (the usb-ids shape). The
public className/subclassName/progIfName(u8...) API is unchanged, so the
hardware-byte decoders (pci-bus, the kernel dump) are untouched; output is
byte-identical.
- the device-manager builds the xHCI class triple from named parts instead of
a bare 0x0C0330.
- the acpi service's _CRS walk names its resource-descriptor tags as
SmallResourceType/LargeResourceType enums, and the _HID integer decode uses
the AML module's existing *_opcode constants (now re-exported from aml.zig)
rather than bare 0x0A/0xFF/... literals.
The kernel no longer folds AML Device objects into the device tree — the
ring-3 acpi service is the sole builder of _HID device nodes. The kernel
keeps building the namespace only for the \_S5 sleep type, and still
seeds the static tables (MADT, HPET, MCFG, FADT) and the acpi-tables node.
The device manager matches ps2-bus from the service's _HID reports
(PNP0303 / PNP0F13, singleton-deduped) instead of boot-snapshot nodes;
its dead boot-snapshot ps2 arm is gone. The service registers every
device before reporting any, so a driver the manager spawns on the first
report already sees the full set — no keyboard-before-mouse race. The
acpi-ps2 scenario proves the whole chain: report -> spawn -> ps2-bus
finds the controller and attaches its keyboard, entirely in ring 3. The
ioport test moved to the acpi-tables I/O window, since the kernel-built
PS/2 node it used to scan for no longer exists. The retired
device-building functions in acpi.zig are dead but retained (a botched
mechanical deletion is worse mid-migration than a follow-up sweep, which
is flagged as a task). Suite 58/58.
AML method evaluation now runs in userspace touching real hardware: the
service builds an interpreter with a ring-3 Hal (port I/O routed through
its claimed acpi-tables node; a scratch page backs SystemMemory maps so a
stray OperationRegion degrades to zeros instead of faulting a process
that cannot map arbitrary physical memory). It walks the namespace and,
for each present _HID device that is not a PCI root, evaluates _CRS,
registers it under acpi-tables, and reports it with its EISA-decoded hid.
Containment for this needed the broker's irq check to become range-based
— an interrupt line is still indivisible, but a parent may own a range,
so the acpi-tables node's broad irq window contains its children's legacy
lines (a length-1 range is exactly the old equality, so single-irq
parents are unaffected). ChildAdded gained a hid field for firmware
string identity. Matching those reports to drivers stays off until M20.3,
so ps2-bus still comes up via the kernel path — no regression. The
acpi-report scenario proves the PS/2 keyboard (io 0x60/0x64 + IRQ) and
mouse (IRQ) are reported with their resources. Suite 57/57.
The AML module becomes a build module compiled into both the kernel (for
the \_S5 sleep state it still needs) and the new acpi service — one
source, two builds, no fork. The kernel publishes a single acpi-tables
node: the DSDT/SSDT blobs as memory resources, a broad io_port grant (the
honest trust boundary — firmware AML names whatever ports it chose, known
only after parsing), and the SCI for the M21 event track. The acpi
service claims the node, maps each blob through the ordinary mmio grant
(which preserves the sub-page offset onto the bytecode), and runs the
same parser the kernel does. It self-verifies its namespace Device count
against the kernel's — 34 = 34 — deterministically via an argv the
acpi-parse test passes, so no racing the shared serial buffer. Parse-only
touches no hardware; OperationRegion evaluation waits for _CRS/_STA in
M20.2. The manager spawns 'discovery' (the neutral ramdisk name) at
startup. Suite 56/56.
system/services/acpi and system/services/fdt exist as documented
placeholders (silent clean-exit mains; the headers say exactly what each
becomes and why). The build's -Ddiscovery=acpi|fdt option fills the
ramdisk's neutral 'discovery' slot — the device manager will spawn
"discovery" by that name in M20.3 and never learn which firmware it is
on (m19-m20-plan.md decision 7). x86 defaults to acpi; the aarch64
target flips the default when it lands.