Decode PCI/ACPI device identities and name their class codes as enums

Two related changes to make device identities legible in the boot log and in
the code that matches on them.

Logging: the pci-bus driver decodes each function's class/subclass/prog-IF
triple to human names (via the existing pci-class module), and the acpi
service appends each _HID's human name (via acpi-ids) to its report line. So
"class 0x01 (Mass Storage Controller) subclass 0x06 (Serial ATA Controller)
progif 0x01 (AHCI 1.0)" reads straight off the log when writing a driver.

Naming: a new coding standard ("Named values, not magic numbers") says a value
with meaning gets a name, prefer an enum for value sets. Applied:
- pci-class is refactored from u8-switch tables into a BaseClass enum plus
  per-class SubClass/ProgIf enums with name() methods (the usb-ids shape). The
  public className/subclassName/progIfName(u8...) API is unchanged, so the
  hardware-byte decoders (pci-bus, the kernel dump) are untouched; output is
  byte-identical.
- the device-manager builds the xHCI class triple from named parts instead of
  a bare 0x0C0330.
- the acpi service's _CRS walk names its resource-descriptor tags as
  SmallResourceType/LargeResourceType enums, and the _HID integer decode uses
  the AML module's existing *_opcode constants (now re-exported from aml.zig)
  rather than bare 0x0A/0xFF/... literals.

build.zig

@@ -347,6 +347,9 @@ pub fn build(b: *std.Build) void {
     const ps2_mouse_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "ps2-mouse", "system/drivers/ps2-bus/mouse.zig");
     const usb_xhci_bus_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "usb-xhci-bus", "system/drivers/usb-xhci-bus/usb-xhci-bus.zig");
     const pci_bus_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "pci-bus", "system/drivers/pci-bus/pci-bus.zig");
+    // The PCI bus driver decodes each function's class triple to human names in its
+    // boot log (class/subclass/prog-IF), so pull in the shared pci-class reference.
+    pci_bus_exe.root_module.addImport("pci-class", pci_class_module);
     // A test fixture, not a real driver: hellos to the device manager, then faults —
     // what the driver-restart scenario drives the crash-loop cap with.
     const crash_test_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "crash-test", "system/services/crash-test/crash-test.zig");
@@ -367,6 +370,8 @@ pub fn build(b: *std.Build) void {
     const discovery_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "discovery", discovery_source);
     if (discovery == .acpi) discovery_exe.root_module.addImport("aml", aml_module);
     const device_manager_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "device-manager", "system/services/device-manager/device-manager.zig");
+    // Names the xHCI PCI class triple from the shared taxonomy instead of a bare 0x0C0330.
+    device_manager_exe.root_module.addImport("pci-class", pci_class_module);
     // The input service and its exercisers: the fan-out server, a hardware-free synthetic
     // source, and a subscriber that doubles as the `input` test's oracle. See docs/input.md.
     const input_exe = addUserBinary(b, kernel_target, runtime_module, posix_module, mmio_module, xkeyboard_config_module, acpi_ids_module, "input", "system/services/input/input.zig");

docs/coding-standards.md

@@ -142,6 +142,32 @@ conventions above — `snake_case` — because it's an identifier, not a filenam
 *directory* (`system/services/init`, `library/runtime`), with the repeated leaf
 resolving away. See the repository-layout section of [README.md](README.md).
 
+## Named values, not magic numbers
+
+The naming rule has a twin: **a value with meaning gets a name, too.** The same
+principle drives both — a reader should never have to leave the code to understand it.
+An abbreviated *name* forces a reader to guess; a bare *number* forces them worse, out
+to a spec or a header or a comment three files away, to learn what the value even *is*.
+If `0x0C` is the PCI serial-bus class, the code says `BaseClass.serial_bus`, not `0x0C`;
+if `0x04` is the ACPI IRQ resource descriptor, it says `SmallResourceType.irq`, not
+`0x04`. The number is an implementation detail of the name — recorded once, where the
+name is defined, and never spelled again at a use site.
+
+**Prefer an `enum`** when the values form a set (device classes, AML opcodes, resource
+descriptor types, states): the type then also says *which* set a value belongs to, and
+the compiler rejects a value from the wrong one. A lone `pub const` with a descriptive
+name suffices for a one-off (`const large_descriptor_bit = 0x80`). Reach for the enum
+the moment code elsewhere compares against, packs, or produces the value — a packed PCI
+class triple is written from named parts (`.serial_bus`, `.usb`, `.xhci`), never as
+`0x0C_03_30` under a comment that decodes the bytes.
+
+The exceptions are the numbers that carry no hidden meaning: `0` and `1` as plain zero
+and one, an index step, a field width, a bit shift. `x + 1`, `buffer[0]`, and `<< 8`
+need no christening — there is nothing to look up. The test is exactly the naming test:
+*would a reader have to look this up to know what it means?* If yes, name it. This is
+what `opcodes.zig`'s `*_opcode` constants, `acpi-ids`'s `HardwareId`, and `pci-class`'s
+class enums already are — reference data defined once and named everywhere it is used.
+
 ## Why acronyms are the line
 
 Because an acronym has no letters to restore. `MMIO` doesn't become "memory mapped

system/devices/aml/aml.zig

@@ -12,6 +12,11 @@ const std = @import("std");
 const opcode = @import("opcodes.zig");
 const parser = @import("parser.zig");
 
+/// The named AML opcode/prefix bytes (`zero_opcode`, `byte_prefix`, …). Re-exported so
+/// callers that decode raw AML bytes — e.g. the acpi service reading a `_HID` integer —
+/// name the opcodes instead of writing bare 0x0A/0x0B/… literals (docs/coding-standards.md).
+pub const opcodes = @import("opcodes.zig");
+
 pub const Namespace = @import("namespace.zig").Namespace;
 pub const Node = @import("namespace.zig").Node;
 pub const NodeKind = @import("namespace.zig").NodeKind;

system/devices/pci-class.zig

@@ -7,6 +7,16 @@
 //! apart. Pure reference data (from the PCI spec; see https://wiki.osdev.org/PCI) — no
 //! hardware access — so it is shared by kernel discovery (the device-tree dump) and any
 //! user-space tool (a future lspci, driver matching).
+//!
+//! The taxonomy is named, not numbered (docs/coding-standards.md, "Named values"): the
+//! base class is a `BaseClass` enum, and each class with defined subclasses gets a
+//! namespace holding its `SubClass` enum (and, where the spec defines them, per-subclass
+//! `ProgIf` enums) — the same shape as `usb-ids.zig`. Code that *means* a specific class
+//! names it (`BaseClass.serial_bus`, `serial_bus.usb.ProgIf.xhci`) rather than writing a
+//! bare 0x0C/0x03/0x30. The `className`/`subclassName`/`progIfName` functions still take
+//! the raw bytes a function reports in its header, because that is what hardware hands us.
+
+const std = @import("std");
 
 /// The three bytes of a PCI class code, unpacked from the `0xCCSSPP` value discovery
 /// records in `Device.ids.pci_class` (CC = base class, SS = subclass, PP = prog-IF).
@@ -22,148 +32,465 @@ pub const ClassCode = struct {
             .prog_if = @intCast(packed_code & 0xFF),
         };
     }
+
+    /// Re-pack the triple into the `0xCCSSPP` form. Lets code name a whole class code
+    /// from its parts — `pack(.{ .base = @intFromEnum(BaseClass.serial_bus), … })` —
+    /// instead of writing the literal 0x0C0330.
+    pub fn pack(self: ClassCode) u24 {
+        return (@as(u24, self.base) << 16) | (@as(u24, self.subclass) << 8) | self.prog_if;
+    }
 };
 
+/// Base class (config byte 0x0B). Non-exhaustive: an unlisted code is a real but
+/// unnamed class, decoded as "Unknown" rather than rejected.
+pub const BaseClass = enum(u8) {
+    unclassified = 0x00,
+    mass_storage = 0x01,
+    network = 0x02,
+    display = 0x03,
+    multimedia = 0x04,
+    memory = 0x05,
+    bridge = 0x06,
+    simple_communication = 0x07,
+    base_system_peripheral = 0x08,
+    input_device = 0x09,
+    docking_station = 0x0A,
+    processor = 0x0B,
+    serial_bus = 0x0C,
+    wireless = 0x0D,
+    intelligent = 0x0E,
+    satellite_communication = 0x0F,
+    encryption = 0x10,
+    signal_processing = 0x11,
+    processing_accelerator = 0x12,
+    non_essential_instrumentation = 0x13,
+    co_processor = 0x40,
+    unassigned = 0xFF,
+    _,
+
+    pub fn name(self: BaseClass) []const u8 {
+        return switch (self) {
+            .unclassified => "Unclassified",
+            .mass_storage => "Mass Storage Controller",
+            .network => "Network Controller",
+            .display => "Display Controller",
+            .multimedia => "Multimedia Controller",
+            .memory => "Memory Controller",
+            .bridge => "Bridge",
+            .simple_communication => "Simple Communication Controller",
+            .base_system_peripheral => "Base System Peripheral",
+            .input_device => "Input Device Controller",
+            .docking_station => "Docking Station",
+            .processor => "Processor",
+            .serial_bus => "Serial Bus Controller",
+            .wireless => "Wireless Controller",
+            .intelligent => "Intelligent Controller",
+            .satellite_communication => "Satellite Communication Controller",
+            .encryption => "Encryption Controller",
+            .signal_processing => "Signal Processing Controller",
+            .processing_accelerator => "Processing Accelerator",
+            .non_essential_instrumentation => "Non-Essential Instrumentation",
+            .co_processor => "Co-Processor",
+            .unassigned => "Unassigned Class (Vendor specific)",
+            _ => "Unknown",
+        };
+    }
+};
+
+// --- Per-class subclass (and prog-IF) taxonomies --------------------------------------
+// One namespace per base class that has defined subclasses, named after the class. Each
+// holds an exhaustive `SubClass` enum (so an unlisted code decodes to the class default,
+// not a wrong name), and, where the spec assigns them, per-subclass `ProgIf` enums.
+
+pub const mass_storage = struct {
+    pub const SubClass = enum(u8) {
+        scsi_bus = 0x00,
+        ide = 0x01,
+        floppy = 0x02,
+        ipi_bus = 0x03,
+        raid = 0x04,
+        ata = 0x05,
+        serial_ata = 0x06,
+        serial_attached_scsi = 0x07,
+        non_volatile_memory = 0x08,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .scsi_bus => "SCSI Bus Controller",
+                .ide => "IDE Controller",
+                .floppy => "Floppy Disk Controller",
+                .ipi_bus => "IPI Bus Controller",
+                .raid => "RAID Controller",
+                .ata => "ATA Controller",
+                .serial_ata => "Serial ATA Controller",
+                .serial_attached_scsi => "Serial Attached SCSI Controller",
+                .non_volatile_memory => "Non-Volatile Memory Controller",
+            };
+        }
+    };
+
+    pub const serial_ata = struct {
+        pub const ProgIf = enum(u8) {
+            vendor_specific = 0x00,
+            ahci = 0x01,
+            serial_storage_bus = 0x02,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .vendor_specific => "Vendor Specific Interface",
+                    .ahci => "AHCI 1.0",
+                    .serial_storage_bus => "Serial Storage Bus",
+                };
+            }
+        };
+    };
+
+    pub const non_volatile_memory = struct {
+        pub const ProgIf = enum(u8) {
+            nvmhci = 0x01,
+            nvm_express = 0x02,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .nvmhci => "NVMHCI",
+                    .nvm_express => "NVM Express",
+                };
+            }
+        };
+    };
+};
+
+pub const network = struct {
+    pub const SubClass = enum(u8) {
+        ethernet = 0x00,
+        token_ring = 0x01,
+        fddi = 0x02,
+        atm = 0x03,
+        isdn = 0x04,
+        picmg_multi_computing = 0x06,
+        infiniband = 0x07,
+        fabric = 0x08,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .ethernet => "Ethernet Controller",
+                .token_ring => "Token Ring Controller",
+                .fddi => "FDDI Controller",
+                .atm => "ATM Controller",
+                .isdn => "ISDN Controller",
+                .picmg_multi_computing => "PICMG 2.14 Multi Computing Controller",
+                .infiniband => "Infiniband Controller",
+                .fabric => "Fabric Controller",
+            };
+        }
+    };
+};
+
+pub const display = struct {
+    pub const SubClass = enum(u8) {
+        vga_compatible = 0x00,
+        xga = 0x01,
+        three_dimensional = 0x02,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .vga_compatible => "VGA Compatible Controller",
+                .xga => "XGA Controller",
+                .three_dimensional => "3D Controller (Not VGA-Compatible)",
+            };
+        }
+    };
+
+    pub const vga_compatible = struct {
+        pub const ProgIf = enum(u8) {
+            vga = 0x00,
+            compatible_8514 = 0x01,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .vga => "VGA Controller",
+                    .compatible_8514 => "8514-Compatible Controller",
+                };
+            }
+        };
+    };
+};
+
+pub const multimedia = struct {
+    pub const SubClass = enum(u8) {
+        video = 0x00,
+        audio = 0x01,
+        telephony = 0x02,
+        audio_device = 0x03,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .video => "Multimedia Video Controller",
+                .audio => "Multimedia Audio Controller",
+                .telephony => "Computer Telephony Device",
+                .audio_device => "Audio Device",
+            };
+        }
+    };
+};
+
+pub const memory = struct {
+    pub const SubClass = enum(u8) {
+        ram = 0x00,
+        flash = 0x01,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .ram => "RAM Controller",
+                .flash => "Flash Controller",
+            };
+        }
+    };
+};
+
+pub const bridge = struct {
+    pub const SubClass = enum(u8) {
+        host = 0x00,
+        isa = 0x01,
+        eisa = 0x02,
+        mca = 0x03,
+        pci_to_pci = 0x04,
+        pcmcia = 0x05,
+        nubus = 0x06,
+        cardbus = 0x07,
+        raceway = 0x08,
+        pci_to_pci_semi_transparent = 0x09,
+        infiniband_to_pci = 0x0A,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .host => "Host Bridge",
+                .isa => "ISA Bridge",
+                .eisa => "EISA Bridge",
+                .mca => "MCA Bridge",
+                .pci_to_pci => "PCI-to-PCI Bridge",
+                .pcmcia => "PCMCIA Bridge",
+                .nubus => "NuBus Bridge",
+                .cardbus => "CardBus Bridge",
+                .raceway => "RACEway Bridge",
+                .pci_to_pci_semi_transparent => "PCI-to-PCI Bridge (Semi-Transparent)",
+                .infiniband_to_pci => "InfiniBand-to-PCI Host Bridge",
+            };
+        }
+    };
+
+    pub const pci_to_pci = struct {
+        pub const ProgIf = enum(u8) {
+            normal_decode = 0x00,
+            subtractive_decode = 0x01,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .normal_decode => "Normal Decode",
+                    .subtractive_decode => "Subtractive Decode",
+                };
+            }
+        };
+    };
+};
+
+pub const simple_communication = struct {
+    pub const SubClass = enum(u8) {
+        serial = 0x00,
+        parallel = 0x01,
+        multiport_serial = 0x02,
+        modem = 0x03,
+        gpib = 0x04,
+        smart_card = 0x05,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .serial => "Serial Controller",
+                .parallel => "Parallel Controller",
+                .multiport_serial => "Multiport Serial Controller",
+                .modem => "Modem",
+                .gpib => "IEEE 488.1/2 (GPIB) Controller",
+                .smart_card => "Smart Card Controller",
+            };
+        }
+    };
+
+    pub const serial = struct {
+        pub const ProgIf = enum(u8) {
+            compatible_8250 = 0x00,
+            compatible_16450 = 0x01,
+            compatible_16550 = 0x02,
+            compatible_16650 = 0x03,
+            compatible_16750 = 0x04,
+            compatible_16850 = 0x05,
+            compatible_16950 = 0x06,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .compatible_8250 => "8250-Compatible (Generic XT)",
+                    .compatible_16450 => "16450-Compatible",
+                    .compatible_16550 => "16550-Compatible",
+                    .compatible_16650 => "16650-Compatible",
+                    .compatible_16750 => "16750-Compatible",
+                    .compatible_16850 => "16850-Compatible",
+                    .compatible_16950 => "16950-Compatible",
+                };
+            }
+        };
+    };
+};
+
+pub const base_system_peripheral = struct {
+    pub const SubClass = enum(u8) {
+        pic = 0x00,
+        dma = 0x01,
+        timer = 0x02,
+        rtc = 0x03,
+        pci_hot_plug = 0x04,
+        sd_host = 0x05,
+        iommu = 0x06,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .pic => "PIC",
+                .dma => "DMA Controller",
+                .timer => "Timer",
+                .rtc => "RTC Controller",
+                .pci_hot_plug => "PCI Hot-Plug Controller",
+                .sd_host => "SD Host Controller",
+                .iommu => "IOMMU",
+            };
+        }
+    };
+};
+
+pub const input_device = struct {
+    pub const SubClass = enum(u8) {
+        keyboard = 0x00,
+        digitizer_pen = 0x01,
+        mouse = 0x02,
+        scanner = 0x03,
+        gameport = 0x04,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .keyboard => "Keyboard Controller",
+                .digitizer_pen => "Digitizer Pen",
+                .mouse => "Mouse Controller",
+                .scanner => "Scanner Controller",
+                .gameport => "Gameport Controller",
+            };
+        }
+    };
+};
+
+pub const serial_bus = struct {
+    pub const SubClass = enum(u8) {
+        firewire = 0x00,
+        access_bus = 0x01,
+        ssa = 0x02,
+        usb = 0x03,
+        fibre_channel = 0x04,
+        smbus = 0x05,
+        infiniband = 0x06,
+        ipmi = 0x07,
+        sercos = 0x08,
+        canbus = 0x09,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .firewire => "FireWire (IEEE 1394) Controller",
+                .access_bus => "ACCESS Bus Controller",
+                .ssa => "SSA",
+                .usb => "USB Controller",
+                .fibre_channel => "Fibre Channel",
+                .smbus => "SMBus Controller",
+                .infiniband => "InfiniBand Controller",
+                .ipmi => "IPMI Interface",
+                .sercos => "SERCOS Interface (IEC 61491)",
+                .canbus => "CANbus Controller",
+            };
+        }
+    };
+
+    pub const usb = struct {
+        pub const ProgIf = enum(u8) {
+            uhci = 0x00,
+            ohci = 0x10,
+            ehci = 0x20,
+            xhci = 0x30,
+            unspecified = 0x80,
+            device = 0xFE,
+
+            pub fn name(self: ProgIf) []const u8 {
+                return switch (self) {
+                    .uhci => "UHCI Controller",
+                    .ohci => "OHCI Controller",
+                    .ehci => "EHCI (USB2) Controller",
+                    .xhci => "XHCI (USB3) Controller",
+                    .unspecified => "Unspecified",
+                    .device => "USB Device (not a host controller)",
+                };
+            }
+        };
+    };
+};
+
+pub const wireless = struct {
+    pub const SubClass = enum(u8) {
+        irda = 0x00,
+        consumer_ir = 0x01,
+        rf = 0x10,
+        bluetooth = 0x11,
+        broadband = 0x12,
+        ethernet_802_1a = 0x20,
+        ethernet_802_1b = 0x21,
+
+        pub fn name(self: SubClass) []const u8 {
+            return switch (self) {
+                .irda => "iRDA Compatible Controller",
+                .consumer_ir => "Consumer IR Controller",
+                .rf => "RF Controller",
+                .bluetooth => "Bluetooth Controller",
+                .broadband => "Broadband Controller",
+                .ethernet_802_1a => "Ethernet Controller (802.1a)",
+                .ethernet_802_1b => "Ethernet Controller (802.1b)",
+            };
+        }
+    };
+};
+
+// --- Raw-byte decoding (what a function reports in its header) -------------------------
+
+/// The name of an exhaustive class-code enum member, or null if `value` is not one — the
+/// bridge from a raw config byte to a named taxonomy above.
+fn enumName(comptime Enum: type, value: u8) ?[]const u8 {
+    return (std.enums.fromInt(Enum, value) orelse return null).name();
+}
+
 /// Name of the base class (byte 0x0B), e.g. `0x06` -> "Bridge".
 pub fn className(base: u8) []const u8 {
-    return switch (base) {
-        0x00 => "Unclassified",
-        0x01 => "Mass Storage Controller",
-        0x02 => "Network Controller",
-        0x03 => "Display Controller",
-        0x04 => "Multimedia Controller",
-        0x05 => "Memory Controller",
-        0x06 => "Bridge",
-        0x07 => "Simple Communication Controller",
-        0x08 => "Base System Peripheral",
-        0x09 => "Input Device Controller",
-        0x0A => "Docking Station",
-        0x0B => "Processor",
-        0x0C => "Serial Bus Controller",
-        0x0D => "Wireless Controller",
-        0x0E => "Intelligent Controller",
-        0x0F => "Satellite Communication Controller",
-        0x10 => "Encryption Controller",
-        0x11 => "Signal Processing Controller",
-        0x12 => "Processing Accelerator",
-        0x13 => "Non-Essential Instrumentation",
-        0x40 => "Co-Processor",
-        0xFF => "Unassigned Class (Vendor specific)",
-        else => "Unknown",
-    };
+    return @as(BaseClass, @enumFromInt(base)).name();
 }
 
 /// Name of the subclass within its base class, e.g. `(0x06, 0x01)` -> "ISA Bridge".
 /// Subclass `0x80` is "Other" by PCI convention; anything unlisted is "Unknown".
 pub fn subclassName(base: u8, subclass: u8) []const u8 {
-    return switch (base) {
-        0x01 => switch (subclass) {
-            0x00 => "SCSI Bus Controller",
-            0x01 => "IDE Controller",
-            0x02 => "Floppy Disk Controller",
-            0x03 => "IPI Bus Controller",
-            0x04 => "RAID Controller",
-            0x05 => "ATA Controller",
-            0x06 => "Serial ATA Controller",
-            0x07 => "Serial Attached SCSI Controller",
-            0x08 => "Non-Volatile Memory Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x02 => switch (subclass) {
-            0x00 => "Ethernet Controller",
-            0x01 => "Token Ring Controller",
-            0x02 => "FDDI Controller",
-            0x03 => "ATM Controller",
-            0x04 => "ISDN Controller",
-            0x06 => "PICMG 2.14 Multi Computing Controller",
-            0x07 => "Infiniband Controller",
-            0x08 => "Fabric Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x03 => switch (subclass) {
-            0x00 => "VGA Compatible Controller",
-            0x01 => "XGA Controller",
-            0x02 => "3D Controller (Not VGA-Compatible)",
-            else => defaultSubclass(subclass),
-        },
-        0x04 => switch (subclass) {
-            0x00 => "Multimedia Video Controller",
-            0x01 => "Multimedia Audio Controller",
-            0x02 => "Computer Telephony Device",
-            0x03 => "Audio Device",
-            else => defaultSubclass(subclass),
-        },
-        0x05 => switch (subclass) {
-            0x00 => "RAM Controller",
-            0x01 => "Flash Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x06 => switch (subclass) {
-            0x00 => "Host Bridge",
-            0x01 => "ISA Bridge",
-            0x02 => "EISA Bridge",
-            0x03 => "MCA Bridge",
-            0x04 => "PCI-to-PCI Bridge",
-            0x05 => "PCMCIA Bridge",
-            0x06 => "NuBus Bridge",
-            0x07 => "CardBus Bridge",
-            0x08 => "RACEway Bridge",
-            0x09 => "PCI-to-PCI Bridge (Semi-Transparent)",
-            0x0A => "InfiniBand-to-PCI Host Bridge",
-            else => defaultSubclass(subclass),
-        },
-        0x07 => switch (subclass) {
-            0x00 => "Serial Controller",
-            0x01 => "Parallel Controller",
-            0x02 => "Multiport Serial Controller",
-            0x03 => "Modem",
-            0x04 => "IEEE 488.1/2 (GPIB) Controller",
-            0x05 => "Smart Card Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x08 => switch (subclass) {
-            0x00 => "PIC",
-            0x01 => "DMA Controller",
-            0x02 => "Timer",
-            0x03 => "RTC Controller",
-            0x04 => "PCI Hot-Plug Controller",
-            0x05 => "SD Host Controller",
-            0x06 => "IOMMU",
-            else => defaultSubclass(subclass),
-        },
-        0x09 => switch (subclass) {
-            0x00 => "Keyboard Controller",
-            0x01 => "Digitizer Pen",
-            0x02 => "Mouse Controller",
-            0x03 => "Scanner Controller",
-            0x04 => "Gameport Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x0C => switch (subclass) {
-            0x00 => "FireWire (IEEE 1394) Controller",
-            0x01 => "ACCESS Bus Controller",
-            0x02 => "SSA",
-            0x03 => "USB Controller",
-            0x04 => "Fibre Channel",
-            0x05 => "SMBus Controller",
-            0x06 => "InfiniBand Controller",
-            0x07 => "IPMI Interface",
-            0x08 => "SERCOS Interface (IEC 61491)",
-            0x09 => "CANbus Controller",
-            else => defaultSubclass(subclass),
-        },
-        0x0D => switch (subclass) {
-            0x00 => "iRDA Compatible Controller",
-            0x01 => "Consumer IR Controller",
-            0x10 => "RF Controller",
-            0x11 => "Bluetooth Controller",
-            0x12 => "Broadband Controller",
-            0x20 => "Ethernet Controller (802.1a)",
-            0x21 => "Ethernet Controller (802.1b)",
-            else => defaultSubclass(subclass),
-        },
-        else => defaultSubclass(subclass),
+    const named: ?[]const u8 = switch (@as(BaseClass, @enumFromInt(base))) {
+        .mass_storage => enumName(mass_storage.SubClass, subclass),
+        .network => enumName(network.SubClass, subclass),
+        .display => enumName(display.SubClass, subclass),
+        .multimedia => enumName(multimedia.SubClass, subclass),
+        .memory => enumName(memory.SubClass, subclass),
+        .bridge => enumName(bridge.SubClass, subclass),
+        .simple_communication => enumName(simple_communication.SubClass, subclass),
+        .base_system_peripheral => enumName(base_system_peripheral.SubClass, subclass),
+        .input_device => enumName(input_device.SubClass, subclass),
+        .serial_bus => enumName(serial_bus.SubClass, subclass),
+        .wireless => enumName(wireless.SubClass, subclass),
+        else => null,
     };
+    return named orelse defaultSubclass(subclass);
 }
 
 fn defaultSubclass(subclass: u8) []const u8 {
@@ -175,68 +502,34 @@ fn defaultSubclass(subclass: u8) []const u8 {
 /// Returns "" when the prog-IF carries no standard meaning for this class/subclass —
 /// callers just print the hex byte in that case.
 pub fn progIfName(base: u8, subclass: u8, prog_if: u8) []const u8 {
-    return switch (base) {
-        0x01 => switch (subclass) {
-            0x06 => switch (prog_if) { // Serial ATA
-                0x00 => "Vendor Specific Interface",
-                0x01 => "AHCI 1.0",
-                0x02 => "Serial Storage Bus",
-                else => "",
-            },
-            0x08 => switch (prog_if) { // Non-Volatile Memory
-                0x01 => "NVMHCI",
-                0x02 => "NVM Express",
-                else => "",
-            },
-            else => "",
+    const named: ?[]const u8 = switch (@as(BaseClass, @enumFromInt(base))) {
+        .mass_storage => switch (std.enums.fromInt(mass_storage.SubClass, subclass) orelse return "") {
+            .serial_ata => enumName(mass_storage.serial_ata.ProgIf, prog_if),
+            .non_volatile_memory => enumName(mass_storage.non_volatile_memory.ProgIf, prog_if),
+            else => null,
         },
-        0x03 => switch (subclass) {
-            0x00 => switch (prog_if) { // VGA Compatible
-                0x00 => "VGA Controller",
-                0x01 => "8514-Compatible Controller",
-                else => "",
-            },
-            else => "",
+        .display => switch (std.enums.fromInt(display.SubClass, subclass) orelse return "") {
+            .vga_compatible => enumName(display.vga_compatible.ProgIf, prog_if),
+            else => null,
         },
-        0x06 => switch (subclass) {
-            0x04 => switch (prog_if) { // PCI-to-PCI Bridge
-                0x00 => "Normal Decode",
-                0x01 => "Subtractive Decode",
-                else => "",
-            },
-            else => "",
+        .bridge => switch (std.enums.fromInt(bridge.SubClass, subclass) orelse return "") {
+            .pci_to_pci => enumName(bridge.pci_to_pci.ProgIf, prog_if),
+            else => null,
         },
-        0x07 => switch (subclass) {
-            0x00 => switch (prog_if) { // Serial Controller
-                0x00 => "8250-Compatible (Generic XT)",
-                0x01 => "16450-Compatible",
-                0x02 => "16550-Compatible",
-                0x03 => "16650-Compatible",
-                0x04 => "16750-Compatible",
-                0x05 => "16850-Compatible",
-                0x06 => "16950-Compatible",
-                else => "",
-            },
-            else => "",
+        .simple_communication => switch (std.enums.fromInt(simple_communication.SubClass, subclass) orelse return "") {
+            .serial => enumName(simple_communication.serial.ProgIf, prog_if),
+            else => null,
         },
-        0x0C => switch (subclass) {
-            0x03 => switch (prog_if) { // USB Controller
-                0x00 => "UHCI Controller",
-                0x10 => "OHCI Controller",
-                0x20 => "EHCI (USB2) Controller",
-                0x30 => "XHCI (USB3) Controller",
-                0x80 => "Unspecified",
-                0xFE => "USB Device (not a host controller)",
-                else => "",
-            },
-            else => "",
+        .serial_bus => switch (std.enums.fromInt(serial_bus.SubClass, subclass) orelse return "") {
+            .usb => enumName(serial_bus.usb.ProgIf, prog_if),
+            else => null,
         },
-        else => "",
+        else => null,
     };
+    return named orelse "";
 }
 
 test "decodes the common class codes" {
-    const std = @import("std");
     const eq = std.testing.expectEqualStrings;
 
     const isa = ClassCode.unpack(0x06_01_00);
@@ -251,11 +544,25 @@ test "decodes the common class codes" {
     try eq("AHCI 1.0", progIfName(ahci.base, ahci.subclass, ahci.prog_if));
 
     const xhci = ClassCode.unpack(0x0C_03_30);
+    try eq("Serial Bus Controller", className(xhci.base));
     try eq("USB Controller", subclassName(xhci.base, xhci.subclass));
     try eq("XHCI (USB3) Controller", progIfName(xhci.base, xhci.subclass, xhci.prog_if));
+}
 
-    // Unknowns and the "Other" convention.
-    try eq("Other", subclassName(0x02, 0x80));
-    try eq("Unknown", subclassName(0x06, 0x7E));
-    try eq("", progIfName(0x06, 0x00, 0x00)); // host bridge: prog-IF has no standard name
+test "unlisted codes fall back without a wrong name" {
+    const eq = std.testing.expectEqualStrings;
+    try eq("Unknown", className(0x77)); // no such base class
+    try eq("Other", subclassName(0x01, 0x80)); // 0x80 is the PCI "Other" convention
+    try eq("Unknown", subclassName(0x01, 0x7A)); // unlisted mass-storage subclass
+    try eq("", progIfName(0x01, 0x06, 0x7F)); // no standard SATA prog-IF for 0x7F
+    try eq("", progIfName(0x02, 0x00, 0x00)); // class with no prog-IF taxonomy at all
+}
+
+test "named parts pack to the raw triple" {
+    const xhci = ClassCode{
+        .base = @intFromEnum(BaseClass.serial_bus),
+        .subclass = @intFromEnum(serial_bus.SubClass.usb),
+        .prog_if = @intFromEnum(serial_bus.usb.ProgIf.xhci),
+    };
+    try std.testing.expectEqual(@as(u24, 0x0C_03_30), xhci.pack());
 }

system/drivers/pci-bus/pci-bus.zig

@@ -14,12 +14,29 @@ const std = @import("std");
 const runtime = @import("runtime");
 const protocol = runtime.device_manager_protocol;
 const device = runtime.device;
+const pci_class = @import("pci-class");
 
 fn writeLine(comptime fmt: []const u8, arguments: anytype) void {
     var line: [128]u8 = undefined;
     _ = runtime.system.write(std.fmt.bufPrint(&line, fmt, arguments) catch return);
 }
 
+/// Log a discovered function with its (class / subclass / prog-IF) triple decoded
+/// to human names — the boot-log breadcrumb that says *what* the hardware is, so
+/// "class 0x01 (Mass Storage Controller) subclass 0x06 (Serial ATA Controller)
+/// progif 0x01 (AHCI 1.0)" reads straight off the log when writing a new driver.
+/// A dedicated wider buffer than `writeLine`'s, since the decoded names are long.
+fn logFunction(bus: u64, dev: u64, function: u64, class_triple: u32) void {
+    const cc = pci_class.ClassCode.unpack(@truncate(class_triple));
+    const pif = pci_class.progIfName(cc.base, cc.subclass, cc.prog_if);
+    var line: [200]u8 = undefined;
+    const text = if (pif.len != 0)
+        std.fmt.bufPrint(&line, "pci-bus: {d}:{d}.{d} class 0x{x:0>2} ({s})  subclass 0x{x:0>2} ({s})  progif 0x{x:0>2} ({s})\n", .{ bus, dev, function, cc.base, pci_class.className(cc.base), cc.subclass, pci_class.subclassName(cc.base, cc.subclass), cc.prog_if, pif }) catch return
+    else
+        std.fmt.bufPrint(&line, "pci-bus: {d}:{d}.{d} class 0x{x:0>2} ({s})  subclass 0x{x:0>2} ({s})  progif 0x{x:0>2}\n", .{ bus, dev, function, cc.base, pci_class.className(cc.base), cc.subclass, pci_class.subclassName(cc.base, cc.subclass), cc.prog_if }) catch return;
+    _ = runtime.system.write(text);
+}
+
 var bridge_id: u64 = protocol.no_device;
 var ecam_base: usize = 0;
 var ecam_physical: u64 = 0;
@@ -137,7 +154,7 @@ fn scan() void {
                 if (vendor_device & 0xFFFF == 0xFFFF) continue;
                 const class_revision = configRead(bus, dev, function, 0x08);
                 found += 1;
-                writeLine("pci-bus: {d}:{d}.{d} class 0x{x:0>6}\n", .{ bus, dev, function, class_revision >> 8 });
+                logFunction(bus, dev, function, class_revision >> 8);
                 registerAndReport(bus, dev, function, class_revision >> 8);
             }
         }

system/drivers/usb-xhci-bus/usb-xhci-bus.zig

@@ -108,6 +108,22 @@ fn readRegister(offset: usize) u32 {
     return register.*;
 }
 
+/// The xHCI default Protocol Speed IDs (the PORTSC port-speed field, bits 13:10)
+/// decoded to human names — the boot-log breadcrumb for what actually enumerated on
+/// a port, the USB analog of the pci-bus class-code line. A controller may redefine
+/// these through its Supported Protocol capability, but the defaults cover every
+/// speed QEMU and real hardware report at this (pre-descriptor) stage.
+fn speedName(speed: u32) []const u8 {
+    return switch (speed) {
+        1 => "Full-speed (USB 2.0, 12 Mb/s)",
+        2 => "Low-speed (USB 2.0, 1.5 Mb/s)",
+        3 => "High-speed (USB 2.0, 480 Mb/s)",
+        4 => "SuperSpeed (USB 3.0, 5 Gb/s)",
+        5 => "SuperSpeedPlus (USB 3.1, 10 Gb/s)",
+        else => "unknown speed",
+    };
+}
+
 /// The root-hub port scan: read the capability registers for the port count
 /// and the operational-register offset, then one PORTSC per port. The connect
 /// bit (CCS) and the speed field reflect hardware state directly — no
@@ -129,7 +145,7 @@ fn scanPorts(manager: runtime.ipc.Handle) void {
         if (port_status & 1 == 0) continue; // CCS: nothing connected
         connected += 1;
         const speed = (port_status >> 10) & 0xF; // the PORTSC port-speed class
-        writeLine("usb-xhci-bus: port {d} connected (speed class {d})\n", .{ port, speed });
+        writeLine("usb-xhci-bus: port {d} connected — {s} (speed class {d})\n", .{ port, speedName(speed), speed });
 
         const report = protocol.ChildAdded{
             .parent = controller_id,

system/services/acpi/acpi.zig

@@ -15,8 +15,12 @@
 const std = @import("std");
 const runtime = @import("runtime");
 const aml = @import("aml");
+const acpi_ids = @import("acpi-ids");
 const device = runtime.device;
 const protocol = runtime.device_manager_protocol;
+/// AML opcode/prefix bytes by name (`zero_opcode`, `byte_prefix`, …) — so the `_HID`
+/// integer decode names the opcodes instead of bare 0x0A/0x0B/… (docs/coding-standards.md).
+const opcodes = aml.opcodes;
 
 fn writeLine(comptime fmt: []const u8, arguments: anytype) void {
     var line: [128]u8 = undefined;
@@ -139,7 +143,16 @@ pub fn main(init: runtime.process.Init) void {
     var i: usize = 0;
     while (i < registered_count) : (i += 1) {
         const entry = registered[i];
-        writeLine("acpi: reported {s} (device {d}, {d} resources)\n", .{ entry.hid[0..entry.hid_len], entry.device_id, entry.resource_count });
+        // Append the _HID's human-readable name when it is a known standard PnP/ACPI
+        // id (e.g. PNP0303 -> "PS/2 Keyboard"), so the boot log says what each
+        // reported device actually is. The description trails the existing fields so
+        // the acpi-report/acpi-ps2 matchers still see "<hid> (device N, M resources)".
+        const hid = entry.hid[0..entry.hid_len];
+        const desc = acpi_ids.description(hid);
+        if (desc.len != 0)
+            writeLine("acpi: reported {s} (device {d}, {d} resources) — {s}\n", .{ hid, entry.device_id, entry.resource_count, desc })
+        else
+            writeLine("acpi: reported {s} (device {d}, {d} resources)\n", .{ hid, entry.device_id, entry.resource_count });
         if (manager) |h| {
             var report = protocol.ChildAdded{
                 .parent = node_id,
@@ -172,8 +185,10 @@ fn walkDevices(node: *aml.Node, interpreter: *aml.Interpreter) void {
 
         if (readHid(c, interpreter)) |hid| {
             // Skip PCI roots — pci-bus already reports PCI functions; ACPI adds
-            // only the non-PCI _HID devices (docs/m19-m20-plan.md M20.2).
-            if (!std.mem.eql(u8, hid[0..7], "PNP0A03") and !std.mem.eql(u8, hid[0..7], "PNP0A08")) {
+            // only the non-PCI _HID devices (docs/m19-m20-plan.md M20.2). The two
+            // roots are named through the shared registry, not bare _HID strings.
+            const id = acpi_ids.HardwareId.fromHid(hid[0..7]);
+            if (id != .pci_bus and id != .pci_express_root_bridge) {
                 registerDevice(c, hid, interpreter);
             }
         }
@@ -225,7 +240,9 @@ fn readHid(node: *aml.Node, interpreter: *aml.Interpreter) ?[8]u8 {
     if (hid.kind != .name or hid.value.len == 0) return null;
     const v = hid.value;
     switch (v[0]) {
-        0x00, 0x01, 0xFF, 0x0A, 0x0B, 0x0C, 0x0E => {
+        // A static _HID names an integer EISA id: Zero/One/Ones or a Byte/Word/DWord/
+        // QWord integer prefix. Anything else is not an integer we can EISA-decode.
+        opcodes.zero_opcode, opcodes.one_opcode, opcodes.ones_opcode, opcodes.byte_prefix, opcodes.word_prefix, opcodes.dword_prefix, opcodes.qword_prefix => {
             var p: usize = 0;
             const n = readIntObj(v, &p) orelse return null;
             _ = eisaIdToStr(@truncate(n), &buffer);
@@ -237,6 +254,33 @@ fn readHid(node: *aml.Node, interpreter: *aml.Interpreter) ?[8]u8 {
 
 // --- _CRS resource-template decode (ported from the kernel's acpi.zig) --------
 
+/// A resource template is a byte list of descriptors. Each starts with a tag byte whose
+/// high bit picks the encoding: a *small* descriptor carries its type in bits [6:3] and
+/// its length in bits [2:0]; a *large* descriptor is the whole tag byte, followed by a
+/// 16-bit length. These are the descriptor types danos decodes into resources — named so
+/// the walk below reads by descriptor, not by 0x04/0x85/… (docs/coding-standards.md).
+const large_descriptor_bit: u8 = 0x80; // set in a tag byte => large descriptor
+const small_length_mask: u8 = 0x07; // low 3 bits of a small tag = body length
+const small_type_shift: u3 = 3; // small type sits in bits [6:3]
+
+/// Small resource descriptor types (tag bits [6:3]). Non-exhaustive: an unhandled type
+/// is skipped by its length, not misread.
+const SmallResourceType = enum(u8) {
+    irq = 0x04,
+    io_port = 0x08,
+    fixed_io_port = 0x09,
+    end_tag = 0x0F,
+    _,
+};
+
+/// Large resource descriptor types (the whole tag byte). Non-exhaustive for the same reason.
+const LargeResourceType = enum(u8) {
+    memory32 = 0x85,
+    memory32_fixed = 0x86,
+    extended_irq = 0x89,
+    _,
+};
+
 fn applyCrs(descriptor: *device.DeviceDescriptor, node: *aml.Node, interpreter: *aml.Interpreter) void {
     const crs = aml.Namespace.childOf(node, seg4("_CRS")) orelse return;
     const obj = interpreter.evaluate(crs, &.{}) catch return;
@@ -247,21 +291,21 @@ fn applyCrs(descriptor: *device.DeviceDescriptor, node: *aml.Node, interpreter:
     var i: usize = 0;
     while (i < bytes.len) {
         const tag = bytes[i];
-        if (tag & 0x80 == 0) {
-            const len: usize = tag & 0x07;
+        if (tag & large_descriptor_bit == 0) {
+            const len: usize = tag & small_length_mask;
             const body = i + 1;
             if (body + len > bytes.len) break;
-            switch ((tag >> 3) & 0x0F) {
-                0x04 => if (len >= 2) { // IRQ mask
+            switch (@as(SmallResourceType, @enumFromInt((tag >> small_type_shift) & 0x0F))) {
+                .irq => if (len >= 2) { // IRQ mask
                     const mask = @as(u16, bytes[body]) | (@as(u16, bytes[body + 1]) << 8);
                     var b: usize = 0;
                     while (b < 16) : (b += 1) {
                         if (mask & (@as(u16, 1) << @intCast(b)) != 0) addResource(descriptor, .irq, b, 1);
                     }
                 },
-                0x08 => if (len >= 7) addResource(descriptor, .io_port, rd16(bytes, body + 1), bytes[body + 6]),
-                0x09 => if (len >= 3) addResource(descriptor, .io_port, rd16(bytes, body), bytes[body + 2]),
-                0x0F => break,
+                .io_port => if (len >= 7) addResource(descriptor, .io_port, rd16(bytes, body + 1), bytes[body + 6]),
+                .fixed_io_port => if (len >= 3) addResource(descriptor, .io_port, rd16(bytes, body), bytes[body + 2]),
+                .end_tag => break,
                 else => {},
             }
             i = body + len;
@@ -270,10 +314,10 @@ fn applyCrs(descriptor: *device.DeviceDescriptor, node: *aml.Node, interpreter:
             const len: usize = @intCast(rd16(bytes, i + 1));
             const body = i + 3;
             if (body + len > bytes.len) break;
-            switch (tag) {
-                0x85 => if (len >= 17) addResource(descriptor, .memory, rd32(bytes, body + 1), rd32(bytes, body + 13)),
-                0x86 => if (len >= 9) addResource(descriptor, .memory, rd32(bytes, body + 1), rd32(bytes, body + 5)),
-                0x89 => if (len >= 2) {
+            switch (@as(LargeResourceType, @enumFromInt(tag))) {
+                .memory32 => if (len >= 17) addResource(descriptor, .memory, rd32(bytes, body + 1), rd32(bytes, body + 13)),
+                .memory32_fixed => if (len >= 9) addResource(descriptor, .memory, rd32(bytes, body + 1), rd32(bytes, body + 5)),
+                .extended_irq => if (len >= 2) {
                     const count = bytes[body + 1];
                     var k: usize = 0;
                     while (k < count and body + 2 + k * 4 + 4 <= body + len) : (k += 1) {
@@ -325,22 +369,22 @@ fn readIntObj(bytes: []const u8, p: *usize) ?u64 {
     const op = bytes[p.*];
     p.* += 1;
     switch (op) {
-        0x00 => return 0,
-        0x01 => return 1,
-        0xFF => return 1,
-        0x0A => {
+        opcodes.zero_opcode => return 0,
+        opcodes.one_opcode => return 1,
+        opcodes.ones_opcode => return 1,
+        opcodes.byte_prefix => {
             if (p.* >= bytes.len) return null;
             const v = bytes[p.*];
             p.* += 1;
             return v;
         },
-        0x0B => {
+        opcodes.word_prefix => {
             if (p.* + 2 > bytes.len) return null;
             const v = rd16(bytes, p.*);
             p.* += 2;
             return v;
         },
-        0x0C => {
+        opcodes.dword_prefix => {
             if (p.* + 4 > bytes.len) return null;
             const v = rd32(bytes, p.*);
             p.* += 4;

system/services/device-manager/device-manager.zig

@@ -18,6 +18,7 @@
 const std = @import("std");
 const runtime = @import("runtime");
 const acpi_ids = @import("acpi-ids");
+const pci_class = @import("pci-class");
 const protocol = runtime.device_manager_protocol;
 const device = runtime.device;
 const system = runtime.system;
@@ -41,10 +42,14 @@ fn driverFor(d: device.DeviceDescriptor) ?[]const u8 {
     return null;
 }
 
-/// The PCI class/subclass/prog-IF triple of an xHCI (USB 3) host controller:
-/// Serial Bus Controller (0x0C) / USB Controller (0x03) / XHCI (0x30) — the names
-/// pci-class.zig decodes.
-const xhci_pci_class: u64 = 0x0C_03_30;
+/// The PCI class/subclass/prog-IF triple of an xHCI (USB 3) host controller —
+/// Serial Bus Controller / USB Controller / XHCI — named from pci-class.zig rather
+/// than written as the bare 0x0C0330 (docs/coding-standards.md, "Named values").
+const xhci_pci_class: u64 = pci_class.ClassCode.pack(.{
+    .base = @intFromEnum(pci_class.BaseClass.serial_bus),
+    .subclass = @intFromEnum(pci_class.serial_bus.SubClass.usb),
+    .prog_if = @intFromEnum(pci_class.serial_bus.usb.ProgIf.xhci),
+});
 
 /// The driver that serves a *reported* PCI function (M19.3: matching moved
 /// from the boot snapshot to the bus reports), or null. A machine can carry

test/qemu_test.py

@@ -55,20 +55,16 @@ ARCHES = {
             "/opt/homebrew/share/qemu/edk2-i386-vars.fd",   # macOS Homebrew (Apple Silicon)
             "/usr/local/share/qemu/edk2-i386-vars.fd",      # macOS Homebrew (Intel)
         ],
-        # zig-out is a FHS-shaped image and the boot volume; the harness copies the
-        # boot-critical files from their FHS paths into a fresh ESP with the same
-        # layout. (dest in ESP, source path under zig-out) — identical here.
-        "efi_app": ("EFI/BOOT/BOOTX64.efi", "EFI/BOOT/BOOTX64.efi"),
-        "kernel": ("system/kernel", "system/kernel"),
-        # The init user program and the initial-ramdisk (VFS server + drivers).
-        "extra": [("system/services/init", "system/services/init"),
-                  ("boot/initial-ramdisk.img", "boot/initial-ramdisk.img")],
+        # zig-out is itself the FHS-shaped boot volume (docs/efi.md): the build
+        # installs BOOTX64.efi, the kernel, init, and the initial-ramdisk at their
+        # boot paths. The harness presents zig-out to the guest directly — exactly
+        # as `zig build run-x86-64` does — so there is no separate ESP to assemble.
         # Built as a function so we can splice in per-run paths.
-        "qemu_args": lambda a, esp, vars_fd, serial: [
+        "qemu_args": lambda a, boot_volume, vars_fd, serial: [
             "-machine", "q35", "-m", "128M",
             "-drive", f"if=pflash,format=raw,readonly=on,file={a['ovmf_code']}",
             "-drive", f"if=pflash,format=raw,file={vars_fd}",
-            "-drive", f"format=raw,file=fat:rw:{esp}",
+            "-drive", f"format=raw,file=fat:rw:{boot_volume}",
             "-net", "none",
             "-vga", "none", "-device", "VGA,edid=on,xres=1280,yres=720",
             "-display", "none",
@@ -404,24 +400,6 @@ def build(arch, case):
     return None
 
 
-def make_esp(arch):
-    """Assemble a fresh EFI System Partition from the freshly built binaries."""
-    esp = os.path.join(WORK, "esp")
-    if os.path.exists(esp):
-        shutil.rmtree(esp)
-    efi_dest, efi_src = arch["efi_app"]
-    kern_dest, kern_src = arch["kernel"]
-    fhs = os.path.join(REPO, "zig-out")  # zig-out is the FHS image
-    os.makedirs(os.path.join(esp, os.path.dirname(efi_dest)), exist_ok=True)
-    os.makedirs(os.path.join(esp, os.path.dirname(kern_dest)), exist_ok=True)
-    shutil.copy(os.path.join(fhs, efi_src), os.path.join(esp, efi_dest))
-    shutil.copy(os.path.join(fhs, kern_src), os.path.join(esp, kern_dest))
-    for dest, src in arch.get("extra", []):
-        os.makedirs(os.path.join(esp, os.path.dirname(dest)), exist_ok=True)
-        shutil.copy(os.path.join(fhs, src), os.path.join(esp, dest))
-    return esp
-
-
 def resolve_firmware(arch):
     """Collapse the ovmf_code/ovmf_vars candidate lists to the first path that
     exists on this machine. Mutates `arch` in place; idempotent (a resolved
@@ -445,7 +423,8 @@ def run_case(arch, case):
     if err:
         return False, "build failed:\n" + err
 
-    esp = make_esp(arch)
+    # zig-out is the FHS boot volume; hand it to the guest as-is (see qemu_args).
+    boot_volume = os.path.join(REPO, "zig-out")
     vars_fd = os.path.join(WORK, "vars.fd")
     shutil.copy(arch["ovmf_vars"], vars_fd)
     serial = os.path.join(WORK, "serial.log")
@@ -455,7 +434,7 @@ def run_case(arch, case):
     expect = re.compile(case["expect"])
     fail = re.compile(case["fail"]) if case.get("fail") else None
 
-    cmd = [arch["qemu"]] + arch["qemu_args"](arch, esp, vars_fd, serial)
+    cmd = [arch["qemu"]] + arch["qemu_args"](arch, boot_volume, vars_fd, serial)
     if case.get("smp"):  # some cases need more than one core (e.g. parallelism)
         cmd += ["-smp", str(case["smp"])]
     if case.get("qemu_extra"):  # extra qemu args, e.g. -device intel-iommu for the IOMMU case