//! iommu-fault-test — the negative proof for IOMMU enforcement. The iommu-fault QEMU
//! case boots with VT-d enabled and an extra e1000e NIC no danos driver claims; this
//! fixture claims it, then deliberately programs its transmit engine to DMA from a
//! physical address that was never dma_alloc'd (so it is in no device's domain). The
//! IOMMU must fault that access — the descriptor fetch never reaches memory — and the
//! system must stay alive. A kernel `DANOS-IOMMU-FAULT` line plus this fixture's
//! `system alive` marker is the pass.
//!
//! The rogue target is the e1000e's transmit descriptor RING base itself: the very first
//! DMA the engine issues on a doorbell write is the descriptor fetch from that base, so
//! pointing the ring at an unmapped page makes the first access the faulting one — no
//! valid descriptor need be crafted.

const std = @import("std");
const device = @import("driver");
const time = @import("time");
const logging = @import("logging");
const mmio = @import("mmio");
const pci = @import("pci");
const pci_class = @import("pci-class");

const intel_vendor: u16 = 0x8086;
const e1000e_device: u16 = 0x10D3;

const ethernet_class: u64 = pci_class.ClassCode.pack(.{
    .base = @intFromEnum(pci_class.BaseClass.network),
    .subclass = @intFromEnum(pci_class.network.SubClass.ethernet),
    .prog_if = 0,
});

// e1000e transmit-engine registers (Intel 82574L datasheet §Register Descriptions),
// byte offsets within BAR0. VERIFY-AGAINST-SPEC held on first bring-up: these are the
// legacy TX ring registers.
const reg_tctl = 0x0400; // Transmit Control
const reg_tdbal = 0x3800; // TX Descriptor Base Address Low
const reg_tdbah = 0x3804; // TX Descriptor Base Address High
const reg_tdlen = 0x3808; // TX Descriptor Length (bytes, 128-byte aligned)
const reg_tdh = 0x3810; // TX Descriptor Head
const reg_tdt = 0x3818; // TX Descriptor Tail

const tctl_en: u32 = 1 << 1; // Transmit Enable
const tctl_psp: u32 = 1 << 3; // Pad Short Packets

/// A low physical page that user DMA never touches — never returned by dma_alloc (whose
/// arena is far higher), so it is in no device's IOMMU domain. The e1000e's descriptor
/// fetch from here is exactly the out-of-domain access the unit must block.
const rogue_physical: u64 = 0x1000;

var descriptor: device.DeviceDescriptor = undefined;

fn writeLine(comptime fmt: []const u8, arguments: anytype) void {
    var line: [128]u8 = undefined;
    _ = logging.write(std.fmt.bufPrint(&line, fmt, arguments) catch return);
}

pub fn main() void {
    const nic_id: u64 = found: {
        var tries: u32 = 0;
        while (tries < 150) : (tries += 1) {
            var descriptors: [64]device.DeviceDescriptor = undefined;
            const total = device.enumerate(&descriptors);
            for (descriptors[0..@min(total, descriptors.len)]) |*entry| {
                if (entry.class == @intFromEnum(device.DeviceClass.pci_device) and entry.pci_class == ethernet_class) {
                    descriptor = entry.*;
                    break :found entry.id;
                }
            }
            time.sleepMillis(100);
        }
        _ = logging.write("iommu-fault-test: FAIL no ethernet function found\n");
        return;
    };

    if (!device.claim(nic_id)) {
        _ = logging.write("iommu-fault-test: FAIL claim\n");
        return;
    }
    var function = pci.Function.map(nic_id, &descriptor) orelse {
        _ = logging.write("iommu-fault-test: FAIL config-space map\n");
        return;
    };
    if (function.vendorId() != intel_vendor or function.deviceId() != e1000e_device) {
        _ = logging.write("iommu-fault-test: FAIL not an e1000e\n");
        return;
    }
    function.enableMemoryAndBusMaster();
    const bar0 = function.mapBar(0) orelse {
        _ = logging.write("iommu-fault-test: FAIL map BAR0\n");
        return;
    };

    // Point the TX ring at the rogue page and kick the engine: TDBA = rogue, a non-zero
    // length, head=0, enable, then tail=1 so the engine fetches descriptor 0 — a DMA
    // read from the rogue page, which the IOMMU must fault.
    _ = logging.write("iommu-fault-test: pointing e1000e TX ring at an unmapped page\n");
    mmio.writeRegister(u32, bar0 + reg_tdbal, @truncate(rogue_physical));
    mmio.writeRegister(u32, bar0 + reg_tdbah, @intCast(rogue_physical >> 32));
    mmio.writeRegister(u32, bar0 + reg_tdlen, 128);
    mmio.writeRegister(u32, bar0 + reg_tdh, 0);
    mmio.writeRegister(u32, bar0 + reg_tctl, tctl_en | tctl_psp);
    mmio.writeMemoryBarrier();
    mmio.writeRegister(u32, bar0 + reg_tdt, 1); // doorbell: fetch descriptor 0

    // Give the engine time to attempt the fetch, then force the fault records to the log.
    time.sleepMillis(200);
    const faults = device.iommuFaultDrain();
    writeLine("iommu-fault-test: drained {d} iommu fault(s)\n", .{faults});
    if (faults == 0) {
        _ = logging.write("iommu-fault-test: FAIL rogue DMA was not blocked\n");
        return;
    }

    // Liveness: the system survived the blocked DMA — read our own config space back.
    if (function.vendorId() != intel_vendor) {
        _ = logging.write("iommu-fault-test: FAIL device unreadable after fault\n");
        return;
    }
    _ = logging.write("iommu-fault-test: system alive\n");
}