First enforcement step of the IOVA track. A vendor-neutral IOMMU core
(iommu.zig) drives an Intel VT-d backend (iommu-intel.zig) to give DMA a
real translation layer instead of the fail-open free-for-all M16 left.
- Boot posture is now stated explicitly: "iommu online (Intel VT-d)"
with version/agaw/rmrr, or "none present - DMA fail-open (unisolated)".
- DMAR parsing extended to select the INCLUDE_PCI_ALL unit (real Intel
PCs put an iGPU-scoped unit first) and record single-path-endpoint
RMRRs; multi-hop scopes and extra DRHDs are counted and warned, never
silently dropped.
- Translation is enabled at boot into a blanket identity domain (all RAM
+ RMRRs, 2 MiB leaves). PCI functions are enumerated post-boot by the
ring-3 pci-bus driver, so a device is attached to the domain when its
driver claims it (confineDevice, with claim rollback if confinement
fails) and detached on driver death, before broker release and DMA
frame teardown. Unclaimed devices are non-present: their DMA faults.
- Interrupt remapping stays off, so MSI writes to 0xFEE00000 bypass
translation and the interrupt-driven xHC keeps working.
- devices-broker gains pciAddressOf (derives BDF from the config-space
ECAM offset), unclaim, and forEachPciFunction.
Faults are drained and logged rate-limited as DANOS-IOMMU-FAULT.
Cases: iommu extended (translation on, scratch-domain map/resolve/unmap,
zero idle faults); new iommu-usb-storage and iommu-usb-hid run the full
storage + input stacks through translated DMA with MSI intact. 103/103.
Without serial and without working USB storage, a slow real-hardware
boot is undiagnosable — 'stabbing in the dark'. Two changes end that:
The log renderer stamps every line with boot-relative seconds
([ 12.045] ...), so every surface — serial, debugcon, and now the
screen — is a readable timeline. And the framebuffer console registers
as an ordinary log sink at boot: kernel AND userspace lines (device
bring-up, fat mounts, logger announcements) show live on screen until
the display service claims the framebuffer, which flips the console's
suppression and silences the sink automatically — the display-owns-the-
screen design is unchanged in normal operation; the console now simply
narrates the part of boot that happens before there IS a display.
On the machine that motivated this, the next boot will show by eye
where the minutes go — including whether the USB chain ever brings
storage up, and whether screen drawing itself crawls (the latent
non-write-combining framebuffer suspect: if these very lines paint
slowly, that's the answer).
Replace the linear keep-earliest RAM buffer with a 512 KiB ring of
framed records (log-ring.zig, host-tested): every debug_write becomes
one record per payload line, stamped by the kernel with the sender's
pid, task name (its binary path), level, per-boot sequence number, and
monotonic timestamp. Attribution is structural — a payload cannot forge
another sender's tag, and newline injection lands inside the forger's
own next record. Oldest records are overwritten when full; sequence
gaps make the loss countable.
debug_write gains a level argument (err/warn/info/debug/raw; old
two-arg callers clamp to raw). klog_read becomes a stream-offset read
that fails once the cursor falls behind the ring's tail; the new
klog_status (#45) returns the cursors plus the boot wall-clock anchor —
what the logger service will name per-boot log directories with.
The log now guards itself with a dedicated spinlock (BKL -> log lock
order, never the reverse); panic paths use a bounded try-acquire and
fall back to sinks-only. Serial rendering keeps the historical
transcript byte-identical for kernel and legacy raw output; leveled
records get a kernel-rendered name prefix. log-flush/init's interim
drains start at the ring tail and write framed records until the logger
service replaces them.
Retire the build-time ramdisk packer and the packed initial-ramdisk.img.
make-fat-image.py now lays every user binary out at its FHS path on the
boot volume (system/services, system/drivers, system/tests), and the EFI
loader walks \system at boot, packing what it finds into an in-RAM v2
initial_ramdisk whose entry names are full FHS paths. init rides the
table like every other binary: its dedicated handoff fields are gone and
the kernel spawns PID 1 via the same lookup as everyone else
(process.spawnBundled).
system_spawn resolves names by exact path first, then unique basename,
and normalizes argv[0] to the stored path — so task names (and, next,
the tagged log ring's attribution) are honest binary paths everywhere.
initrd v2 rejects the old magic so a stale image fails loudly.
Groundwork for per-process logging (/var/log/<boot-stamp>/<binary-path>.log)
and the kernel-VFS /system mount.
Both EDID moments the system has are now captured and carried to the
compositor's frame clock:
- EFI: the loader derives refresh from the preferred detailed timing
(pixel clock / total pixels) while GOP is still alive — the only moment
it is readable — and hands it through the boot handoff into the
display0 node's DisplayInfo (new refresh_hz field, 0 = unknown).
- GPU: the virtio-gpu driver derives the same figure from its own EDID
read and carries it in the attach_scanout announce (request.y).
updateFrameClock() re-derives the interval from the active backend's
info at bring-up and again on every backend change — the boot
framebuffer's clock dies with the GOP floor at upgrade, replaced by the
GPU's rate. Unknown rate defaults to 60 Hz; the result is clamped to
[30, 120] Hz so a mis-parsed EDID can neither starve nor flood the
compositor. Rate only, never phase: without vblank, presents still
free-run (docs/display-v2.md, 'Fenced is not vsync').
Observed in QEMU: OVMF exposes no EDID for the VGA adapter, so the GOP
floor logs 'frame clock 62 Hz (default)' (real firmware does expose it);
the virtio-gpu EDID advertises 75 Hz and the upgrade logs 'frame clock
76 Hz (panel EDID)'. The display kernel test asserts refresh_hz rides
the seeded node; all 7 display QEMU cases pass.
Two gaps a real-hardware crash exposed, both in onException's terminal path (and
the panic path):
- The report was anonymous. Add the faulting task's id + name and whether it
trapped in ring 3 (a user process) or ring 0 (the trusted base) — so a fatal
fault says WHAT crashed and WHERE, not just the vector. scheduler gains
currentIdSafe/currentNameSafe (early-boot-guarded, like currentCpuIndex, so the
reporter can't fault a second time).
- halt() never released the big kernel lock, so a core that died holding it
deadlocked every other core spinning in acquire() — the whole machine hangs,
not just the one core the design promises. The BKL now records its owner
(architecture.cpuLocal(), a unique per-core token); sync.releaseIfHeldHere()
frees the lock only if this core holds it, called before halt on both fatal
paths. Caveat: if we held it mid-mutation the shared state may be inconsistent,
but letting the other cores + the supervisor keep running is strictly more
recoverable than a guaranteed total hang.
Now that the user-space display service owns the framebuffer, the bootstrap
console shrinks to fatal-only. status/statusPrint go to the diagnostic log
alone, so routine boot output no longer scribbles on a screen the compositor is
about to paint — and a driver's recoverable fault report stays off it too. A new
fatal/fatalPrint keeps panics and kernel-mode faults on screen, forcing the
console back on so a dying machine's last words show even over a live display.
console.zig now documents its early-boot + fatal-fallback role.
Kick off the display service track (docs/display.md, docs/display-plan.md): a
user-space compositor that owns the framebuffer. GOP and the PCI display device
are two views of one controller; GOP dies at ExitBootServices, so the portable
base is the boot-handoff linear framebuffer.
D1 makes that framebuffer reachable from user space over the existing device
claim/mmio_map path rather than a bespoke syscall:
- device-abi: a `display` DeviceClass, a DisplayInfo{w,h,pitch,format} on the
descriptor, and a flags field on resources with a write-combining bit.
- devices-broker: seedDisplay() publishes the loader's framebuffer as a
root-level `display` node (one WC-flagged memory resource); kmain seeds it
after discovery. displayDevice()/displayClaimed() track the claim.
- paging/mmio_map: mapUserDeviceInto gains a write_combining bool — a WC-flagged
resource maps through PAT entry 4 instead of strong-uncacheable (an
uncacheable framebuffer blit is glacial).
- console: falls silent while a display service holds the framebuffer, and is
forced back on by the panic/exception paths.
Gate: the `display` kernel test asserts the seeded node's shape and that the
claim + mmio_map leaf is genuinely write-combining (PAT bit set, PCD/PWT clear).
Regression-checked discovery/ioport/claim-release/supervision/device-list/
device-manager with the +1 device in the table.
Kernel discovery interpreted the whole DSDT/SSDTs (~0.5 MB -> ~9700 nodes) solely to extract the _S5 sleep type for a kernel-side soft-off — ~1-2s of work on the single-core, pre-scheduler critical path, with nothing to overlap it. The ring-3 acpi service already parses the same blobs and owns S5 end-to-end (reads pm1a_cnt from the FADT, writes SLP_TYP itself; orderly-shutdown tests it). So drop the kernel parse entirely.
- all *static*-table parsing stays (MADT/HPET/FADT/MCFG): CPUs, timers, PCIe, and the power register map are still detected from ACPI, not legacy/compat addresses (timer still calibrates via HPET/PM-timer/CPUID, PIT only as last resort)
- kernel keeps reboot (FADT reset register + legacy fallbacks — no AML); soft-off is userspace-only now
- removed PowerInformation.s5/s3, the kernel AML namespace, aml_stats, amlDeviceCount, and the aml import; power.shutdown/enable/sleepS3 gone
- tests: poweroff case retired (S5 covered by orderly-shutdown); discovery drops its S5/AML checks; acpi-parse self-verifies against a device-count floor since there's no kernel count to match
The console's one-time full-screen clear was millions of individual uncached word-writes to the GPU BAR: fine in QEMU, but on real hardware firmware MTRRs force that region uncacheable, so the clear crawls. Program PAT entry 4 to write-combining (setupPat, on the BSP and every AP) and map the framebuffer window with the PAT bit, so those writes batch into bursts.
The clear ran on the *loader's* uncached mapping because console.init happened before enablePaging. Move it to just after paging, so it uses the kernel's write-combining mapping instead. The cost: on-screen output is absent before paging (an early panic still lands in the serial/RAM log). Verified: 11 QEMU cases (incl. SMP AP-PAT, USB/FAT/ACPI) plus a screendump showing the framebuffer cleared to black with the status text rendered correctly.
Serial is now a QEMU/dev aid, not a real-hardware necessity: a legacy-free board often has no live COM1, and the boot log is kept in RAM (klog) and flushed to disk. So the serial sink is compiled in only under -Dserial (default false).
- kernel.zig gates serialInit + the log sink on build_options.serial
- boot/efi.zig gates its EFI: progress breadcrumbs (con_out) via progress(); fatal-error messages stay always-on so a failed boot still explains itself
- run-x86-64 boots a serial-enabled image variant (factored addKernel/addBootImage helpers) so a dev boot always captures serial0, without baking serial into the flashable image
- test/qemu_test.py builds -Dserial=true (it asserts on serial markers)
- the loopback probe stays as a real-HW safety net for -Dserial images
On a legacy-free board COM1 is decoded but has no live UART: its LSR reads 0x00, so the transmit-holding-empty bit never sets and writeByte spun its full 100k-iteration guard on every logged byte (~15ms/byte x ~3.7k bytes to 'initialised' ~= 57s). QEMU always has a working UART, so this only bit real hardware; the boot log survived via log.ramSink.
- probe() loopback-tests the UART in init(); write() is a no-op when absent, so a dead port costs nothing per byte
- guard cut 100k -> 5k (backstop for a live-but-stalled UART only)
- serialPresent() + a boot line making the absent-UART case visible
Adds real (calendar) time, the foundation for filesystem timestamps. Monotonic
time (`clock`) says how long since boot; this says what time it actually is.
- cpu.zig (x86_64): readRtcUnixSeconds() reads the CMOS real-time clock (ports
0x70/0x71) — waits out an update-in-progress, reads twice until stable, handles
BCD-vs-binary and 12-vs-24-hour per status register B — and converts to Unix
epoch seconds (UTC).
- kernel/wall-clock.zig: reads the RTC once at boot and anchors it to the monotonic
clock, so a query is a cheap arithmetic offset — no per-call CMOS poll, no lock,
no SMP hazard on the shared ports. kmain calls init() once the monotonic clock is
final and logs the epoch.
- wall_clock() syscall (33) -> Unix epoch seconds, wrapped by runtime.system
.wallClock(). Wall-clock *seconds* are mechanism the kernel owns like the
monotonic clock; calendars/timezones are user-space policy (the stale comment on
systemClock that called wall-clock a "user-space service" is updated in spirit by
the new handler's doc).
- A `wall-clock` kernel test asserts the boot RTC read is a plausible current epoch.
Verified against the host: the guest read epoch 1783971244 while `date -u +%s` gave
1783971245 (one second of boot lag) — the CMOS read + epoch conversion are correct to
the second. zig build, zig build test, and smoke/clock/init are green.
On a headless or real board nothing captures serial, so the boot log — the whole
diagnostic stream — is lost at power-off. This retains it in the kernel and copies
it to the boot USB volume as /mnt/usb/DANOS.LOG, the on-disk equivalent of QEMU's
`-serial file:`. Pull the stick, read DANOS.LOG on another machine.
How it fits together:
- Kernel RAM sink (log.zig): a fixed 256 KiB in-image buffer registered as a log
sink in kmain, right after serial. Because userspace debug_write funnels through
log.write, it captures the entire stream — kernel lines and every service's
output — from the first line. Fills linearly and stops when full (earliest boot
output, the most valuable, is kept); no allocation, so it is panic-safe.
- klog_read syscall (32): copies that buffer out to a user buffer, the mirror of
debug_write — same overflow-safe user-half bounds check, kernel -> user copy,
under the kernel lock so the snapshot can't grow mid-copy. Wrapped by
runtime.system.klogRead.
- log-flush (new one-shot, in the initial-ramdisk): waits for the fat server to
mount /mnt/usb, then copies the whole log to /mnt/usb/DANOS.LOG. init spawns it
once the boot services are up (fire-and-forget; it polls the mount itself). If
no volume is mounted — no stick, or the no-VFS ramdisk sweep — it exits silently.
- init shutdown flush: init repeats the copy inline at the top of shutDown(),
BEFORE it tears down the storage services (the fat server is stopped first), so
a clean poweroff captures the fullest log while /mnt/usb is still writable.
- unistd.writeAll: loops write() past the 224-byte VFS payload cap; both flush
paths use it.
The filename is 8.3 (DANOS.LOG) at the mount root — the FAT short-name rule, and
there is no mkdir on the FAT path yet. Extend-only writes mean the two same-session
flushes never leave stale bytes (the shutdown log is a superset of the boot log);
a shorter log on a later boot of the same stick can leave a stale tail — a noted,
cosmetic limitation, not worth pulling O_TRUNC into the FAT write path for now.
Verified end to end under QEMU: a new `log-flush` case (reusing the orderly-shutdown
build) asserts both markers then S5, and DANOS.LOG is read back out of the image
afterwards (11804 bytes, containing the kernel init line, the FAT mount line, and
the boot flush marker). Regression stays green: zig build, zig build test, zig
build check-fat-image, and a sequential QEMU sweep — smoke, init, initial-ramdisk
(log-flush silent in the bare sweep), orderly-shutdown, fat-mount, usb-storage,
usb-hid, vfs, input, device-manager, process, signals, dma, fault-pf.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The kernel records an ExitReason at all three death sites — clean exit,
fault (classified by vector), and process_kill — into a bounded ring
before the exit notification posts, so a supervisor's query never races
the notice. process_exit_reason is gated by the same supervisor check as
kill; runtime.process.exitReason is the stable interface. This is the
input restart policy reads (docs/process-lifecycle.md iron rule 2).
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.
The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).
Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
A CPU exception raised in ring 3 by a scheduled process now kills that
process - IRQ bindings, IPC handles, and address space reclaimed, a
client it owed a reply to failed with the new -EPEER instead of hung -
and the core reschedules (docs/resilience.md step 2). Kernel-mode
faults, NMI, double fault, and machine check stay terminal, as does the
borrowed-thread isolation probe. Proven by the new fault-recovery QEMU
test: init keeps heartbeating after a process page-faults to death.
Retire the kernel's spawn-every-initial-ramdisk-binary loop, resolving the
service/driver split into a real three-level supervision hierarchy:
kernel -> spawns init (PID 1) only, and publishes the initial-ramdisk
init -> the service supervisor: spawns the system services (vfs, device-manager)
device-manager -> spawns the drivers it matches (hpet)
The kernel now only hands the initial-ramdisk image to the process layer
(publishInitialRamdisk) so user space can system_spawn from it; it launches nothing
bundled itself. init gains a boot-services list ("vfs", "device-manager") and spawns
them best-effort before settling into its heartbeat — policy lives in user space,
where a microkernel keeps it. Drivers are absent from that list on purpose: the
device manager owns them. Test-only binaries (vfs-test, bus) no longer run at boot;
their kernel self-tests still spawn them directly.
This removes increment 2's transitional double-spawn: a real boot now brings hpet up
exactly once (verified — kernel -> init -> vfs/device-manager -> hpet, zero "claim
failed"). The automated suite is unaffected: test builds run their case and halt
before the normal boot path, so each already spawns its own binaries. Suite 36/36
plus host tests; normal boot verified by hand under QEMU.
Add a `system_spawn(name)` system call: the kernel loads a binary bundled in the
initial-ramdisk, by name, as a fresh ring-3 process. It's the mechanism a user-space
supervisor needs — discovery and policy stay in user space, the kernel only spawns.
The kernel already holds the initial-ramdisk image from the boot handoff; it now
stashes it (process.setInitialRamdisk) so the handler can resolve names, bounds-checks
the name into the user half like debug_write, and returns -1 for an unknown name or a
load failure. Ungated for now (any process may spawn any bundled binary); a spawn
capability belongs here once the model grows one.
The device manager stops logging "would spawn it" and calls runtime.system.spawn on
its matched driver. On QEMU it discovers the HPET, matches `hpet`, and spawns it — and
the driver comes all the way up (claims the timer, maps its MMIO, binds and services
its IRQ, prints "hpet: ok"). The device-manager test now keys on that final marker:
since only the manager is spawned, `hpet: ok` appearing proves the whole
discover -> match -> system_spawn -> driver-up chain end to end.
Transitional: the kernel still auto-spawns the whole initial-ramdisk at boot, so a
real boot briefly double-spawns hpet (the second claim fails harmlessly). Increment 3
removes that redundancy so the manager is the sole owner of driver spawning. Suite
36/36 plus host tests.
The reorg moved user binaries under /system (init -> /system/services/init,
drivers -> /system/drivers/<name>, vfs-test -> /system/services/vfs/vfs-test), but
many comments and log strings still named the old /sbin/ home. Retarget them all:
kernel/loader/test comments and the two boot log lines, plus vision.md and the
driver-model.md proposed tree (also dropped the stale `d` suffixes and rt->runtime
there). The initial-ramdisk spawn log no longer fakes a /sbin/ prefix, since those
binaries live in different homes (services vs drivers).
Left the FSH design doc's /sbin and /lib rows alone — whether /sbin stays a
directory at all is a design call for its owner, not a stale-comment fix.
The `system` module (formerly `danos`) had become a grab-bag: it held the
loader<->kernel handoff *and* the kernel<->user ABI *and* the device wire types, in
one module three different audiences imported. Usage proved the seam — the
bootloader never touched the syscall/device ABI, and user space never touched the
boot handoff — so split it by audience, one module per contract:
system/boot-handoff.zig loader <-> kernel: BootInformation, Framebuffer,
MemoryMap, the VM layout + physicalToVirtual, kernel_abi
system/abi.zig kernel <-> user, core: SystemCall, mmap prot flags,
page_size, notify_badge_bit, ServiceId
system/devices/device-abi.zig kernel <-> user, devices: DeviceDescriptor,
DeviceClass, ResourceDescriptor, ResourceKind, ...
device-abi is the devices sub-project's public interface, exposed as its own module
the way vfs exposes vfs-protocol — importable by user space, unlike the
kernel-internal device model it also feeds. That collapses a real duplication:
DeviceClass and ResourceKind were defined twice (device-model.zig and the contract,
kept "in sync by hand"); device-model now re-exports them from device-abi, so the
enum a driver matches on and the one the kernel classifies with are one type.
Each import now declares which contract it speaks: the bootloader imports only
boot-handoff; a driver only abi + device-abi (via the runtime); the kernel all
three. This also retires the `system` / `runtime.system` name overlap. page_size
lands in abi (it's part of the mmap contract user space aligns to); the bootloader
keeps its own local 4 KiB constant so it depends on nothing but the handoff.
All 21 importers rewired, docs updated to keep /system mapping to source. Build,
host tests, and the QEMU suite (36/36) all green.
The shared kernel<->user ABI contract (BootInformation, the SystemCall numbers,
DeviceDescriptor, page_size, ...) is now the `system` module at
system/system.zig, following the convention that a directory's root file takes
the directory's name.
One overlap to note: the runtime's syscall wrappers are already `runtime.system`,
so the single file that uses both the contract and those wrappers
(library/runtime/heap.zig) aliases the wrappers locally as `system_calls`. The
two are distinct (top-level `system` vs `runtime.system`); everywhere else the
contract is just `system`.
Also: the QEMU run's serial capture now lands in the FHS log location,
zig-out/var/log/system/serial0-<timestamp>.log — a stand-in for the kernel's own
logging system, which will eventually write there itself.
Suite 35/35 plus host tests green.
`zig build` now installs into a FHS-shaped zig-out that *is* the danos filesystem
and the boot volume — no more zig-out/bin or a separate esp/:
zig-out/EFI/BOOT/BOOTX64.efi (firmware entry; UEFI fixes this path)
zig-out/boot/initial-ramdisk.img
zig-out/system/kernel (the kernel binary)
zig-out/system/services/init vfs
zig-out/system/drivers/hpet bus
Binaries land at their addressed, leaf-collapsed paths per the sub-project
resolution rule (system/services/init/init.zig -> system/services/init); vfs, hpet,
and bus are installed to their FHS homes too, so the image is complete even though
at boot they arrive inside the initial-ramdisk.
The bootloader (boot/efi.zig) now loads each artifact from its FHS path
(system\kernel, system\services\init, boot\initial-ramdisk.img); run-x86-64 mounts
zig-out directly; the QEMU test harness assembles its ESP from the FHS zig-out.
Also renames system/kernel/main.zig -> kernel.zig so the kernel follows the
name/name.zig convention (kernel/ = ring-0 code, services/ = ring-3 OS services).
Documents the resolution rule in the repository-layout section (README + coding
standard). Suite 35/35 plus host tests green.
Daniel Samson