The manager matches the pci_host_bridge node and spawns pci-bus with the
bridge id as its assignment — hello, supervision, restart, all the M18
contract for free. The driver claims the bridge, maps the ECAM window
(resource 0) through the ordinary mmio grant, and repeats the kernel's
brute-force bus/device/function walk from user space. The pci-scan
scenario builds its expected marker from the kernel's own function count,
so the two enumerations must agree exactly — the equivalence that
licenses retiring the kernel walk in M19.3.
The host bridge now carries MMIO apertures derived from the boot memory
map's gaps below 4 GiB (largest three, sort-merged; a single after-the-
last-region hole dies on OVMF's flash at the top) plus one aperture above
the described space — so a user-space device_register of PCI functions
with BAR resources can pass containment. The discovery test asserts
every PCI memory resource lies inside a bridge window and names any
escapee. device_register is idempotent on exact (parent, class, identity,
resources) match — a restarted registering bus cannot duplicate its
children; proven directly against the broker in the bus test.
ChildAdded gains device_id so a report can carry the registered kernel
id a matched driver needs as its assignment.
resilience.md: steps 1-4 of the ladder are built — supervision, exit
reasons, restart with backoff, crash-loop caps, all proven by scenario;
what remains is scope, not mechanism. README statuses follow. drivers.md
gains the driver-contract section (harness, hello, crash-freely). The
M19-M20 plan pre-settles three things the loop would otherwise have had
to decide alone: the memory-map pass-through for apertures, the manager
spawning 'discovery' from M20.1, and hid[8] riding ChildAdded for ACPI
string identity until the FDT widening.
system/services/acpi and system/services/fdt exist as documented
placeholders (silent clean-exit mains; the headers say exactly what each
becomes and why). The build's -Ddiscovery=acpi|fdt option fills the
ramdisk's neutral 'discovery' slot — the device manager will spawn
"discovery" by that name in M20.3 and never learn which firmware it is
on (m19-m20-plan.md decision 7). x86 defaults to acpi; the aarch64
target flips the default when it lands.
Discovery is one swappable process per firmware (acpi service on x86, an
fdt service on the Pis); everything at and above the device-manager
protocol stays generic. The manager owns the tree as data and never
touches hardware — firmware bytecode runs in a crashable, supervised
discoverer. Flagged now: hid[8] cannot hold an FDT compatible string,
and cross-firmware protocols are named by domain (power, not ACPI).
Battery, AC, lid, and the power button ride the acpi service as reported
children with small class drivers — the xHCI split repeated. QEMU can
only prove the power-button path (system_powerdown injects the real fixed
event), so battery/EC are interface-complete and hardware-validated on
the laptop. Per-device power states (D-states, suspend/resume) stay out
of scope: suspend has the shape of a lifecycle signal every driver must
answer, and it has no consumer until laptop sleep.
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
child_added/child_removed join the device-manager protocol. The driver
maps its register BAR (resource 0 is the ECAM config space; the walk
starts at 1), reads CAPLENGTH and HCSPARAMS1, and reads one PORTSC per
port: the connect bit and speed class come straight from hardware, no
rings needed to see the devices. The manager mirrors reported children
keyed by (parent, port), remembers which instance reported each, and
prunes a dead reporter's children before deciding the restart — the
children describe protocol state that died with the process. The
usb-report scenario drives the whole loop: two QEMU devices reported,
reporter killed, children pruned, driver respawned with backoff, and the
new instance re-claims, re-scans, and re-reports.
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
Claim release on death, exit reasons, published exit events with the VFS
as first subscriber, signals over IPC with one-shot timers and the
service harness — docs/process-lifecycle.md increments 1-4, all built.
Signals are statements delivered as coalescing notifications to the
endpoint a process nominates with signal_bind — never a hijacked stack,
never a question (liveness is the zero-length ping the harness answers).
process_signal is supervisor-or-self gated, like kill; unbound targets
accumulate a pending mask delivered on bind. timer_bind is the missing
timed wait: a one-shot deadline landing in the same replyWait as
everything else — what stop(), hello deadlines, and restart backoff are
built from. runtime.service.run folds requests, signals, and
notifications into callbacks; the VFS conversion deletes its hand-rolled
loop and gains the whole lifecycle contract. The signals scenario drives
ping, reload, terminate->exited, the timer, and the deaf-child
deadline->killed path from ring 3. docs/process-lifecycle.md increments
1-4 are now as-built.
process_subscribe adds an endpoint to a bounded, ref-counted subscriber
table; every death posts the same badge encoding a supervisor's exit
notification uses, equally late, so subscribers observe a fully-released
child. A dying subscriber's own subscriptions are removed first — it never
hears about itself. The VFS is the first subscriber: open handles now
record their owner and are swept when the owner dies, because a service
must never depend on clients cleaning up after themselves
(docs/process-lifecycle.md). Proven by the vfs-client-death scenario.
The kernel records an ExitReason at all three death sites — clean exit,
fault (classified by vector), and process_kill — into a bounded ring
before the exit notification posts, so a supervisor's query never races
the notice. process_exit_reason is gated by the same supervisor check as
kill; runtime.process.exitReason is the stable interface. This is the
input restart policy reads (docs/process-lifecycle.md iron rule 2).
Every path out of a process (exit, fault, kill) now releases its device
claims alongside its IRQ and MSI bindings, so a restarted driver can claim
its hardware again — the cleanup half of process-lifecycle.md's iron rule 1.
MSI vectors were already swept by irq.releaseOwner; claims were the gap.
The claim-release test proves kill -> release -> re-claim, plus the broker
release in isolation.
Signals over IPC (POSIX concepts, message delivery), published exit events,
the stable runtime.process interface, and the device manager as tree +
matcher + supervisor. All open questions settled; docs/m17-m18-plan.md is
the phase-by-phase execution plan.
The ps2-bus executable was built with the artifact name "bus" — a
copy-paste from the generic bus driver's line above it. The initial
ramdisk was unaffected (the packer pairs names with binaries
explicitly), so the driver ran at boot; but the FHS install uses the
artifact's own name, so both drivers landed on
zig-out/system/drivers/bus, one overwriting the other, and
zig-out/system/drivers/ps2-bus never existed.
Turn acpi-ids.zig's flat name table into a HardwareId enum modeled on
ps2-library's Port: one entry() switch holds the registry (variant ->
_HID string + human-readable name), with hid(), description(), and
fromHid() methods. The free description(hid) lookup the kernel's
device-tree dump uses survives, implemented over the enum, and a new
test round-trips every variant through fromHid.
Callers now name the device instead of quoting its id:
- ps2-library's DeviceType.hid() and ps2-bus's descriptor lookups use
HardwareId.ps2_keyboard / .ps2_mouse.
- device-manager's driverFor parses the HID once with fromHid and
switches on named values.
- acpi.zig's isPciRootNode carried the same ids twice, as strings and
as packed-EISA integers (0x030AD041/0x080AD041); both branches now
decode to the string form and answer through one isPciRootHid helper
using .pci_bus / .pci_express_root_bridge.
- build.zig threads the acpi-ids module (previously kernel-only) into
every user binary, like xkeyboard-config.
Add an AttachStatus enum to ps2-library.zig for AttachReply.status,
distinguishing the three failure causes handleAttach previously
collapsed into a bare -1: invalid_request (message too short),
missing_endpoint (no capability passed), and no_such_device (no port
identified the requested device type). The keyboard and mouse drivers
check against AttachStatus.ok rather than a literal 0.
Replace the mouse driver's synthetic stream with the real path, the
way the keyboard was wired:
- The auxiliary port's IRQ12 is enumerated on the mouse's own ACPI
node (PNP0F13), and the kernel only lets a device's claimer bind or
ack its IRQs — so ps2-bus now claims that node alongside the
controller whenever port 2 carries a device, binds IRQ12 to its one
endpoint, and re-arms whichever line the notification's badge names.
The forwarding loop already routed auxiliary bytes by status bit 5.
- mouse-packet.zig (new, pure, host-tested): three-byte stream-mode
packet assembly — bit-3 sync with resynchronization, ACK/BAT bytes
dropped at packet start, nine-bit two's-complement movement,
overflow packets discarded, and PS/2 positive-Y-up converted to the
screen convention (positive down).
- mouse.zig mirrors the keyboard driver: no hardware claim, attaches
to the bus as its mouse, and publishes button_down/button_up per
changed button plus motion events with the pressed-button mask.
Verified end to end in QEMU via monitor mouse_move/mouse_button:
motion round-trips in screen coordinates, buttons transition with the
right mask, and keyboard events keep flowing alongside. The follow-up
is the IntelliMouse magic-knock for a scroll wheel (four-byte packets)
and scroll events.
Replace the keyboard driver's synthetic stream with the real path:
- ps2-bus binds IRQ1 (interrupt bits set only after the bind), drains
port 0x60 on each interrupt, and forwards every byte to the attached
child driver over async ipc_send, routed by the status register's
auxiliary-output bit. Children attach via the new well-known ps2_bus
service, handing over their endpoint as a capability.
- scancode.zig (new, pure, host-tested): scancode set 2 -> USB HID
usage decoding (F0/E0/E1 prefix state machine) plus keyboard state —
pressed-key bitmap, typematic-repeat classification, modifier and
caps-lock tracking.
- keyboard.zig decodes the forwarded stream and publishes real
key_down/key_press/key_up events, filling key_press characters via
xkeyboard-config (layout from argv[2], default us) and synthesizing
ASCII control characters for Enter/Tab/Backspace/Escape.
- protocol.zig names the full HID usage set in Keycode; build.zig
threads the xkeyboard-config module into user binaries.
Verified end to end in QEMU via monitor sendkey: shift, caps lock,
and control-character synthesis all decode correctly. The mouse
driver still publishes its synthetic stream; attaching it to the
bus the same way is the follow-up.
Turn a keycode + modifiers into a character. The input module delivers HID
usage keycodes but nothing mapped them to characters; rather than hand-maintain
layout tables, vendor the X11 xkeyboard-config database and compile it to native
Zig at build time (no X11 runtime), the way make-initial-ramdisk.py packs the
ramdisk.
- tools/make-xkeyboard-config.py: `fetch` downloads the pinned xkeyboard-config
release (2.44, sha256-verified), resolves the include graph for the configured
layouts, and vendors only the reached symbols files + keysymdef.h + COPYING +
PROVENANCE into library/xkeyboard-config/vendor/. `generate` parses that
(keycodes via a HID->xkb-name table, symbols with include/augment/override and
per-key type, keysymdef for keysym->Unicode) and emits generated/layouts.zig
deterministically.
- library/xkeyboard-config/xkeyboard-config.zig: the API over the generated data
— map(layout, hid_usage, mods) -> { keysym, character }, byName, and the
level-selection semantics (the generated tables stay pure data). Host tests
assert US letters/digits with Shift/Caps, GB £ vs US # on Shift+3, and French
AZERTY q-where-US-has-a — the end-to-end proof of the parse->emit->lookup path.
- build.zig: `xkeyboard-config` + `layouts` modules, the test wired into
`zig build test`, and a `zig build gen-xkeyboard-config` convenience step.
- Layouts: us, gb, de, fr, es, dvorak. Scope (documented): group 1, no dead-key
composition, curated key types. Standalone library; wiring it into the input
path to fill KeyEvent.character is a documented follow-up.
zig build test green (incl. the new keymap tests); regeneration is byte-identical;
full QEMU suite 48/48 (unaffected — no kernel/runtime/service change).
Extend the input service beyond the keyboard so mouse and joystick/gamepad
drivers can broadcast too, with per-device publish and subscribe methods.
- protocol: KeyEvent joins MouseEvent (motion/buttons/scroll) and
JoystickEvent (axes/buttons), all carried in a common InputEvent envelope
tagged with a DeviceKind. A subscribe request carries a device_mask, so a
subscriber names the classes it wants and the service routes each event only
to interested subscribers (a mouse-only listener never wakes for keystrokes).
- runtime: per-device publish methods (publishKeyboardEvent/publishMouseEvent/
publishJoystickEvent) and subscribe helpers (subscribeKeyboard/Mouse/Joystick,
each typed, plus subscribe(mask)/subscribeAll returning the tagged envelope).
- service: subscriber table gains a device_mask; broadcast routes by the
event's device class.
- mouse driver now publishes (synthetic) mouse events like the keyboard driver;
input-source cycles all three classes; input-test subscribes to all and only
emits its "ok" marker once it has received one of each class — so the passing
test proves per-device routing, not just delivery. Real HID decoding stays a
follow-up.
No kernel changes: ipc_send is generic and the 36-byte InputEvent fits its
64-byte payload. Full QEMU suite 48/48; serial log confirms keyboard, mouse,
and joystick all reach one subscription.
Programs can now subscribe to keyboard events (key_down/key_up/key_press)
and drivers can broadcast them, through a new user-space input service.
The delivery model is forced by danos IPC: a synchronous rendezvous holds
one pending reply, so a server cannot park N subscribers blocked in a
"wait for next event" call — delivery must be push. But a synchronous push
has no timeout and the kernel never wakes a sender parked on a dead peer's
endpoint, so one dying subscriber would hang all input. So this lands the
roadmap's planned asynchronous buffered send and builds the service on it:
- ipc_send (syscall 26): non-blocking post to an endpoint's bounded payload
ring, delivered through reply_wait as a buffered message (notify_message_bit).
A full ring drops the oldest. It can never hang on a dead/slow peer.
- input-protocol + runtime.input helpers (subscribe/next, connectSource/
publish) — the first real consumer of M13 capability passing: a subscriber
hands the service its own endpoint as a capability.
- input service (fan-out via ipc_send, dead-subscriber pruning), a synthetic
input-source, and input-test; the ps2-bus keyboard driver publishes to it.
Real IRQ1 scancode decoding (which must live in the bus, the PNP0303 owner)
is a documented follow-up; the source is synthetic for now.
- build/init wiring, an `input` QEMU case, and docs/input.md.
Full QEMU suite 48/48, including the new input case and every IPC/endpoint
regression (ipc, ipc-call, ipc-cap, vfs, hpet, bus, irqfree).
process_enumerate snapshots the task table (the device_enumerate shape, so
ps is a user program); system_spawn returns the child id, records the caller
as supervisor, and takes an exit endpoint; process_kill is allowed only for
the supervisor. Every death — exit, fault, or kill — posts a child-exit badge
to that endpoint (the IRQ-as-IPC pattern as SIGCHLD). A target caught off-CPU
is reaped in place; a running one is condemned and finished at its next
system call or tick, guarded so teardown never lands mid-kernel-operation.
Tested by process-list, process-kill, and supervision (a ring-3 supervisor
exercising the whole surface); design notes in docs/process-management.md.
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.
The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).
Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
Daniel Samson
Daniel Samson