The kernel was always symmetric (dma_bind 51 / dma_unbind 52); the two
protocols that forward an attachment up the stack were one-way, so a live
client could grant a device reach into its buffer but never revoke it while
alive — exactly the one-way lifecycle the storage architecture's enforcement
section forbids. Death stays the mechanical backstop; detach is the living
process's path.
Both verbs are appended, so every existing number holds. The shape mirrors
attach precisely: the same region capability rides the cap slot again — the
kernel matches the region, so no layer retains anything between the calls
(the bus never kept the handle; now it never needs to).
fat's bring-up does attach -> detach -> attach, exercising both verbs
through the whole chain (fat -> storage -> bus -> kernel) on every boot: a
broken detach fails every fat case instead of lying dormant until the first
buffer replacement. Honest scope: the round trip proves the plumbing; unbind
semantics are the kernel iommu tests' (map/unmap/translationOf); the full
composition (detach then DMA faults) is a future iommu-fault extension.
The hot-plug matrix's predicted bug, found on first contact: tearDownPort
never recursed into a departing hub's children — only tearDownHubDevice
(a hub leaving one level down) did. Yank a populated hub from a root port
and the downstream slots stayed live against vanished hardware, their class
drivers were never reaped, and the replugged hub found its port still
occupied, so nothing ever re-enumerated: the subtree was gone for the boot.
tearDownPort now recurses children-first, exactly like tearDownHubDevice.
The usb-hub-yank case is the discrimination: one device_del removes a hub
carrying a keyboard AND a mouse, both drivers must be reaped, and the
re-added hub must rebind both — it failed against the unfixed bus and
passes with the recursion.
P1 of docs/establishment-planes-plan.md. The bus no longer binds
/protocol/usb-transfer — the bind race made whichever instance came second
unreachable, which on a real three-controller Ryzen meant a mouse no class
driver could reach ("could not open device 50"). Each instance hands its
serving endpoint up in the hello that already delegates its controller, and
class drivers receive their OWN controller's channel from helloForChannel —
routed by the manager's lineage, retried while a provider is mid-restart,
on one manager handle so retries never spend handle-table slots.
usb.open(bus, id) now takes the channel it used to look up; the name rows
leave protocol.csv with the code (bind 67, opens 119/120/122); the
conformance fixture's prose stops claiming the bus binds; and the stale
input-client import leaves the bus with the channel one.
Gate: 19 QEMU cases green (usb family, hubs, both IOMMU variants, fat chain,
boot-from-USB, orderly shutdown, conformance).
The first driver to stop claiming its own hardware. The device manager holds
the controller and transfers it in the hello reply, so its matching becomes
authoritative instead of advisory — until now the driver claimed the id it
found in argv[1], and any process could have claimed the same integer first.
The manager claims before it spawns, so there is no window in which anything
else could take the device, and transfers in onHello using invocation.sender
— the kernel-stamped task id, which cannot be forged by the caller. hello is
synchronous, so the transfer has completed before the reply lands: no gap
between being told yes and holding the thing.
usb-xhci-bus's hello moves from after controller bring-up to before anything
that needs the device, which is the bring-up reorder the design predicted.
It is the first member of an explicit delegated set, so every unconverted
driver keeps claiming exactly as before and the suite stays green; the set
and device_claim both go at D6. D3 and D4 could not be separated and the
plan records why: the moment the manager claims, any driver still calling
device_claim is refused, and D3 applied to nothing changes no behaviour and
cannot be tested.
This step introduced a regression and the incremental conversion is what
caught it. confineDevice runs inside systemDeviceClaim, so a device arriving
by transfer was never confined for its new owner. Three IOMMU+USB cases
failed on the driver's DMA rings going unbound, and two worse consequences
were latent: a manager death would have torn down a domain a live driver was
using, and a driver death would have leaked one. iommu.reassign now moves
the confinement with the device, keeping the domain and its attachment
intact so it never translates through nothing. Converting all five drivers
at once would have produced the same three failures with five suspects.
A log line of mine claimed "holding controller device N" before anything
verified it — it printed even in the failure case, where the driver held
nothing. Reworded to state only what is known there: where the registers
are.
usb-hid asserts the delegation with the device id backreferenced, so the id
delegated and the id the driver ends up with must match. Emptying the
delegated set fails it with "hello acknowledged" then "mmio_map failed".
usb-hub failed once in a full run and has passed six times since (four
isolated, two full) — recorded in the plan as a suspected instance of the
known intermittent AP fault, not dismissed, since this step did shift boot
timing.
Suite 118/118.
Both device-setup paths issued a successful Enable Slot and then returned
null if allocateDevice failed, without disabling it. A slot the driver
forgets is one the controller never reissues, so each attempt lost one
permanently for the boot. The hub path did it with no log line at all.
Both now release the slot through a shared disableSlot, extracted from
tearDownDevice, and the hub path warns like the root-port path does.
tearDownDevice also now frees the interface list. That allocation arrived
with the previous commit, so an unplug would have leaked it — found while
reading the teardown path for this fix rather than by a test.
No regression test, and it is recorded as open question 5 rather than
implied. After the slot count became the controller's own figure, reaching
this path needs more devices than the controller has slots: QEMU offers four
against sixty-four. What was verified is that the new path RUNS correctly —
pinning tracking to 2 with four devices attached produced "port 6 setup: no
free device slot", the first two devices enumerated normally, and no Disable
Slot error or timeout appeared, which is how disableSlot reports failure.
Suite 116/116.
max_interfaces was 4. A composite device — a headset, a webcam with audio, a
dock, a multifunction printer — routinely has more, and the fifth did not
merely go missing. parseConfiguration's cap branch had no `else`, so when the
count was reached `current` kept pointing at interface 3 and the fifth
interface's endpoint descriptors were appended to interface 3's array. A
class driver bound to interface 3 could then be handed an endpoint belonging
to something else entirely, and subscribe or bulk-transfer on it. The
alternate-setting arm one line above cleared `current` correctly, which is
what the cap branch should have done.
Interfaces are now counted from the block in a first pass and allocated to
exactly that number, so the ceiling is bNumInterfaces' u8 — the USB
specification's. The missing `else` is added too, though after this the bug
is unreachable by construction: interface_count cannot reach interfaces.len
mid-parse when the list was sized from the same walk.
max_configured_endpoints was max_interfaces * max_endpoints_per_interface =
16, a derived guess that moved whenever either input moved. It is now 31,
which is the xHCI specification's own limit: a Device Context holds a slot
context plus at most 31 endpoint contexts, because the Context Entries field
addressing them is 5 bits.
max_endpoints_per_interface stays at 4 with its reason recorded — the
usb-transfer wire protocol reports exactly max_reported_endpoints (4) per
interface, so widening it alone would change nothing a class driver sees.
Lifting it is a protocol change.
No direct test, and that is written down as open question 5 rather than
glossed. The parser is pure and wants a host unit test, but
usb-xhci-library.zig imports memory, mmio and time so it cannot be a
standalone test root, and QEMU offers nothing that reaches the path — the
largest device available is usb-audio,multi=on at 2 interfaces and 211
bytes. The alternate-setting path that shares the same `current = null`
logic is exercised by that device.
Suite 116/116.
The driver read the first 512 bytes of a configuration block into a fixed
buffer and parsed those. The block's length is the device's own choice
(wTotalLength, a u16), so anything larger was silently cut: interfaces past
the cut did not exist as far as the host was concerned, while the
SET_CONFIGURATION that follows still configured the device for all of them.
A headset is 500-900 bytes, a UVC webcam 1-3 KB, a multifunction printer
600+.
Now allocated at the declared length, so the ceiling is the field's u16 —
the specification's number rather than one of ours. A block shorter than its
own 9-byte header is refused rather than trusted.
The bring-up line reports the declared length and the bytes actually read,
so a truncation can never again be invisible, and usb-large-descriptor
asserts they match with a backreference.
That case has an honest limit, recorded in its comment: QEMU cannot produce
a block over 512 bytes. The boot keyboard, mouse and stick are 34-44, and
the largest device available is usb-audio in multi-channel mode at 211 —
which is exactly why the suite never caught this, and why it cannot now
reproduce the original trigger. What it does catch is the class: any clamp
below the attached device's block fails it, verified by pinning the buffer
to 128 and watching "config block 211 bytes, read 128" turn the case red.
Suite 115 -> 116.
max_devices was 8, with the comment "QEMU presents a handful; a fuller
machine would grow this" — a number chosen against the test rig, waiting for
a real machine, which is the pattern docs/bounds-track-plan.md exists to
stop.
The driver already knew the true figure. It reads HCSPARAMS1.MaxSlots at
bring-up and writes it straight into op_config, so every slot the controller
offers has always been *enabled*; only the array tracking them was 8. QEMU's
xHCI reports 64, so seven eighths of the controller was live and invisible,
and the ninth device — a keyboard, mouse, webcam, headset, hub and two
sticks reach that without trying — disappeared on a hub-attached path that
logs nothing at all.
The array becomes a slice allocated from max_slots at bring-up. A controller
claiming zero slots cannot address anything, so that is now a dead
controller rather than an empty allocation failing mysteriously later. The
Device Context Base Address Array is a page, 511 usable entries, so it
already covered the 255-slot maximum.
The bring-up line reports both numbers, and usb-hid asserts they are equal
with a backreference rather than a magic number, so the test cannot drift
from the hardware. Pinning tracking back to 8 fails it: "64 slots,
tracking 8".
Suite 115/115.
An AMD Ryzen booted to a working compositor with no USB and no storage,
and the log said only "register refused". A tree-wide audit of every
compile-time ceiling followed: 235 of them, 139 on quantities the machine
or a file decides rather than us, 5 documented anywhere, 171 silent when
reached. docs/fixed-bounds-audit.md has the inventory.
Errno attribution. The errno space was split between the kernel and the
envelope, free to drift; it is now one list in system/abi.zig, restated on
both sides, with a comptime check in library/device/driver where the two
halves are visible. device_register's six refusals and device_claim's three
are distinct codes, so a bus driver can say which rule stopped it, and
BadParent splits into NoSuchParent and NotYourParent. pci-bus reconciles
found against registered instead of counting refused functions as found.
Idempotency ordering. The child cap was checked before the identity match,
so a restarted bus was refused its own devices — the supervision restart the
system leans on ratcheted toward a degraded machine. A re-registration
consumes no slot and is now admitted first.
IOMMU fail-closed. confineDevice returned success for a device id past the
confinement table, leaving the device outside every domain while the caller
believed it confined — unreachable only while ids stop at 64, which both the
inventory move and a hardware-reported domain count would change. It refuses
now, and the coupling to the broker's device cap is a comptime assert rather
than a sentence in a comment.
PCI apertures. The bridge's MMIO apertures are derived from the holes in the
firmware memory map, and the derivation copied sub-4 GiB entries into a
fixed [64] array and skipped the rest. A skipped region is not merely lost:
the gap finder concludes it is free, so a real machine's 60-200 entry map
yields an aperture over live RAM, and containment then admits a child BAR
covering kernel memory. Rewritten to walk the map in place, with the hole
finder extracted as a pure function and driven by a synthetic 100-entry map
in a new test case. Both new tests were verified to fail on the old code.
parameters.zig gains the rationale it was missing and loses a stale sentence
pointing at the wrong file; vdso.md documents the errno space, including
EPEER, which had no written meaning anywhere.
docs/os-development/bounds.md is how a ceiling is declared from here.
docs/bounds-track-plan.md is the plan to remove the ones we invented.
Suite 114 -> 115.
Three services had each written the same thing and got it three different
ways: input polled the process list to notice a dead subscriber, and only
when someone else subscribed; the power service never noticed at all; the
device manager noticed drivers but not subscribers. The harness owns the
table now, driven by the events a protocol declares — it registers on the
reserved verb, frames each event once, posts to everyone interested without
waiting on any of them, and reclaims a slot when the kernel says its owner
died. Interest masks moved to the envelope, so a subscriber that wants only
mice asks the same way everywhere.
Two consequences the plan had not foreseen. The device manager now hears a
supervised child's death twice, once as its supervisor and once as a
subscriber, so restart backoff counted every crash twice and gave up after
half as many; it retires the id before counting. And the kernel's published
exit table had eight slots for what is now six subscriptions in a plain
boot, so it holds sixteen.
The other half is a hole the design named early and left standing: a
backend handed out a small integer and then honoured it from anyone. A
process that guessed a file's node id read another client's file; a display
layer had no owner at all, so any client could reconfigure or destroy any
layer; a USB device token was never checked against the client that opened
it. Each is now bound to the task that opened it, and a wrong owner gets
exactly what an unknown id gets — the refusal must not become the oracle
the identical answers elsewhere were designed to remove. Closing a file
changed with it: it used to succeed unconditionally, which would have told
a caller which ids existed.
Suite 111/111, with a new case in which one process holds a file and a
layer, hands both ids to a second process, and finds them untouched after
that process has tried everything with them.
These were the awkward ones. Each began with an operation packed into a
single byte — two of them with a version wedged in beside it — so there was
no wrapping them: the layouts had to be rebuilt. The device manager's own
enumerate and subscribe become the reserved verbs that mean the same thing
everywhere, its replies lose three status structs the envelope already
carries, and a device id becomes the packet's target. Power drops the
version it repeated on every request, because describe is the handshake,
and stops claiming a 64-byte ceiling it never needed for calls. USB moves a
control transfer's data to the packet tail in both directions, which makes
the status length the transferred length and retires a field that had been
saying the same thing twice.
The danger in this one was not the protocols but their readers. Init
recognised a power button by two bytes at the head of a message, the ACPI
service dispatched on the first byte, the xHCI driver read its operation
with a raw integer load, and the HID drivers reinterpreted a report
wholesale — none of which would have failed to compile once the layouts
moved. They would simply have stopped: no shutdown on the power button, no
reports from the keyboard. Every one of them now reads through the
generated types, and the shutdown gate that answers only a subscriber is
the same code it was.
Two sizes were decided by measuring rather than assuming. The child-added
message is both a request and the event broadcast to subscribers, and
alignment rounds it to 48 bytes, which puts its packet exactly on the
64-byte push floor — a test pins that, because a field added carelessly
would now overflow it. The interrupt report gives up eight bytes of inline
room to make space for the header; the two drivers that produce reports
send eight and four.
Suite 110/110.
A protocol is reached by name now, not by a compile-time integer. Init is
PID 1 and already knows which binary it started, so init serves /protocol
as a vfs backend: bind claims a contract with the provider's endpoint
attached, open answers with that endpoint as the reply's capability, and
readdir lists what is bound with the task and binary behind it. The kernel
reserves the prefix — nothing may mount over it, under it, or unmount it —
and ServiceId, ipc_register and ipc_lookup are gone, their syscall numbers
left vacant.
A bind is authorized by who the caller *is*: the kernel-stamped binary
together with the supervising task's identity, matched against
/system/configuration/protocol.csv. Identity, not spelling — spawn is
ungated, so an attacker can run any bundled binary, and a name-only rule
would have let it launder grants through an init of its own making. A name
a live process holds is refused to everyone else; a dead one's is released.
Three review rounds against a hostile ring-3 process found what 108 green
tests could not, because the suite contains no attacker. Publishing init's
supervision endpoint as the registry put PID 1's mailbox in every process's
hands, where two forged bytes reached the shutdown path: privileged traffic
is now believed only from the task that holds the contract it speaks for.
A capability arriving on a request outlived every path that ignored it,
one handle per call until the table was full — in init, and in the harness
ten services share — so the arriving capability is owned by the turn and
released unless a handler says otherwise. And the kernel let anyone holding
an endpoint handle aim signals, timers, exit notices and interrupts at it:
binding now requires having created it.
Suite 108/108. The new protocol-registry case asserts eleven properties,
each one an attack that must fail.
/etc/init.csv and /etc/devices.csv become /system/configuration/*.csv (the
repo's etc/ moves to system/configuration/, mirroring the runtime tree),
/var/log becomes /system/logs, and /mnt/usb becomes /volumes/usb. The
kernel VFS gains a carve-out so FAT may serve exactly /system/configuration
and /system/logs beneath the initrd-backed /system while /system and /test
themselves stay unshadowable; FAT's single /var mount splits into those two
rewritten mounts. The kvfs readdir check learns /system's third child and
the ramdisk spawn sweep skips the configuration tree.
Suite 106/106.
The module-to-domain table in build-support duplicated what each
domain's build.zig already states with its addModule exports. userBinary
now resolves each named import by searching the packages the binary
declared in its own build.zig.zon (b.available_deps), which also makes
the zon the literal include path: an import can only be satisfied by a
domain the binary claims, and naming a module whose domain is missing
fails the build graph with the domain to declare. build-support is down
to the recipe alone. All build variants green; manifest unchanged.
display-client and input-client (files and module names), so a service,
its wire contract, and its client never share a name: `display` the
service, `display-protocol` the contract, `display-client` a program's
view of it. The nine consumers' imports and their packages' declared
lists follow (regenerated from the source scan); build-support's
module_homes table carries the new names.
Every binary's build.zig now names precisely the modules its source
imports (derived by scanning each artifact's sources, transitively
through same-directory files), and its zon carries only the domains
those come from — kernel stays implicit (the root shim + link script
live there). build-support's userBinary resolves each name through one
module-to-domain table (module_homes); Domains/domains()/defaultImports
and the raw recipe entry point are deleted. An undeclared @import is a
compile error (verified: injecting @import("xkeyboard-config") into
logger fails with 'no module named ... available within module
program'), and e.g. xkeyboard-config now appears in exactly two
manifests — the two keyboard drivers. Availability never bloated the
emitted binaries (Zig compiles only what a program imports); this makes
the declared interfaces honest. Production and -Dtest-case manifests
byte-identical; all build variants and standalone package builds
green.
init, fat, display, display-demo, device-manager, input, logger, and
the two discovery fillers (acpi, fdt — each exporting an artifact named
"discovery"; the root -Ddiscovery picks which ships) convert to binary
packages on the pci-bus template. init's serial heartbeat flag rides
the dependency options (the root forwards its -Dserial). fat's and
display's unit tests move into their packages and the root aggregate
delegates to them. Boot-image file list unchanged.
Replaces L2's interim DMA pool (every buffer reachable by every claimed
device) with true per-grant confinement: a device reaches only buffers
whose capability was delegated to its driver.
Kernel:
- DmaRegionObject (handle kind 2): a delegation token naming a dma_alloc'd
region, passable across processes on the IPC cap slot like an endpoint
or shared-memory object. Frames stay owned by the allocating address
space (freed on dma_free/teardown as before); the token carries a `dead`
flag so a stale downstream handle can no longer bind a freed region.
- dma_alloc gains the dma_shareable flag: it returns a capability handle
in r8 and every region is tracked in a registry. A task's own regions
auto-bind into the devices it claims (its rings just work); foreign
buffers are bound explicitly.
- dma_bind / dma_unbind / handle_close syscalls (51-53). dma_bind maps a
held region (or shared-memory) capability into a claimed device's domain;
it is idempotent. handle_close reclaims a table slot (raised 16 -> 32).
- dma_free and task death unmap a region from every domain and invalidate
BEFORE its frames return to the allocator — the stale-IOTLB use-after-
free window, closed structurally.
Protocols (flag-day): block gains attach, usb-transfer gains dma_attach —
each carries a region capability on the cap slot. fat allocates its bounce
buffer shareable and attaches it; usb-storage allocates its transport
buffers shareable, attaches them to the controller, and forwards fat's
capability downstream; usb-xhci-bus binds and closes; virtio-gpu binds its
shared scanout surface. The physical addresses on the wire are unchanged
(identity IOVA), so no register-programming code moved.
Cross-process DMA (fat -> usb-storage -> xHC) now flows only through
delegated capabilities. iommu-usb-storage / iommu-usb-hid / iommu-fault
all green under per-grant enforcement; 104/104 overall (fail-open paths
unchanged).
library/device/pci is now the complete generic floor a leaf PCI driver
needs, instead of just what virtio-gpu used:
- pci-class: capability IDs, MSI/MSI-X/power-management/PCI-Express
register layouts, extended-capability header decode (host-tested),
per-bit command constants, remaining header offsets.
- pci.Function: header accessors, disableBusMaster + interrupt-disable
helpers, findCapability, programMsi/disableMsi, MsiX vector-table
struct, ensurePowerStateD0, functionLevelReset (BAR save/restore),
extended-capability iterator.
Proven by the new pci-caps QEMU case: a pci-cap-test fixture claims an
extra e1000e (PM+MSI+PCIe+MSI-X, no danos driver) and readback-verifies
every surface, including the first driver-side use of msi_bind.
usb-xhci-bus converts from 8 ms event-ring polling to message-signalled
interrupts: plain MSI where offered (real Intel xHC), MSI-X entry 0
otherwise (qemu-xhci has no MSI capability), byte-identical polling as
fallback. The timer survives as a 250 ms port-reconcile/lost-edge tick —
real-hardware USB2 hub debounce still needs it. MSI setup runs BEFORE
controller bring-up: QEMU's xhci only registers the MSI-X vector as used
when IMAN.IE is written while MSI-X is already enabled; interrupts are
silently dropped otherwise (real hardware does not care about the order).
101/101 QEMU cases green; real-hardware smoke passed (mouse works,
boot 2026-07-23T174805Z, plain-MSI branch, vector 33).
Each bus's discovery line now prints the device's would-be /etc/devices.csv row
(bus, base, class, prog_if, vendor, device, subsystem / hid) in uppercase hex,
followed by the human-readable names — so a row for a new driver reads straight
off the boot log, for pci, usb, and acpi alike.
- pci-bus: logFunction moved to registerAndReport (where vendor/device/subsystem
are read from config space) and reformatted to columns + names; subsystem
prints '*' when the function has none. Read unclaimed via the bridge ECAM, so
no per-function claim is needed.
- usb-xhci-bus, acpi: the same column framing on their existing discovery lines.
- qemu_test.py: the acpi-ps2 and acpi-report regexes updated to the new ACPI
format (both verified passing in QEMU).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KJqSiLLchDUUCoXn5jsiwd
Replace the three hardcoded switch tables (pciDriverForIdentity, hidDriverFor,
usbDriverForIdentity) with an authoritative, human-readable device registry the
manager reads at boot. Matching is most-specific-wins across
base/subclass/prog_if/vendor/device/subsystem/hid, so a precise vendor:device
rule and a generic class rule coexist; an unmatched device is logged, never
guessed. This resolves docs' "matching stays code until the third bus".
- ABI: child_added and DeviceDescriptor gain vendor/device/subsystem; child_added
gains a bus discriminator (BusKind) so PCI and USB class triples match against
the right namespace.
- pci-bus reads vendor/device (config 0x00) and subsystem (0x2C, type-0) and
reports them.
- library/device/registry: freestanding CSV parser + matchDriver() with
specificity scoring; 5 unit tests wired into `zig build test`.
- etc/devices.csv bundled into the initrd; the kernel serves /etc directly, so
the manager reads it before any filesystem service is up (fat starts later).
- virtio-gpu: drop the now-redundant post-spawn 1AF4:1050 re-confirm, since the
registry binds this driver by exact identity.
- Remove the orphaned system/drivers/display driver (unreferenced by build or
registry).
- docs: new devices-csv.md; device-manager.md "matching stays code" resolved.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KJqSiLLchDUUCoXn5jsiwd
Every user binary and the two device-logic library modules (pci, usb) now
`@import` the concern modules directly instead of aliasing through `runtime`:
runtime.ipc/process/time/service/input/block/display -> @import("<module>")
runtime.device / runtime.device_manager -> @import("driver")
runtime.fs -> @import("file-system")
runtime.Thread -> @import("thread").Thread
runtime.system.{write,writeRecord,klog*} -> logging.*
runtime.system.{sleep,timerOnce,wallClock,clock} -> time.*
runtime.system.{spawn*,kill,exit,yield,processes,...}-> process.*
runtime.system.{mmap,munmap,PROT_*} -> memory.*
runtime.dma.* / runtime.shared_memory.* / runtime.allocator -> memory.*
Each consumer keeps its own alias name (e.g. `const device = @import("driver")`),
so call sites are unchanged and there are no collisions with local `driver`
variables. build.zig now injects the concern modules into every user binary via
`default_imports`; pci/usb module import lists were updated to match.
The `runtime` and `system` shims remain for one more step (root.zig still uses
runtime); they are deleted in C5. Nothing but root.zig imports `runtime` now.
Verified: zig build, zig build test, and 17 QEMU cases (smoke, device-manager,
logger, fat-mount, fat-mutations, usb-storage, usb-hid, display-native,
virtio-gpu, input, thread-spawn, thread-mutex, process-kill, shared-memory,
driver-restart, acpi-ps2, pci-scan).
mmio is device-driver code, so it joins the other domains under
library/device/mmio/ (module name "mmio" unchanged — a pure relocation, only
the build paths move). And its abbreviated function names are spelled out per
docs/coding-standards.md:
read -> readRegister mb -> memoryBarrier
write -> writeRegister rmb -> readMemoryBarrier
wmb -> writeMemoryBarrier
All call sites updated (virtio-gpu, usb-xhci-library, pci.Function); the two
display-driver placeholders import mmio but use nothing, so they're untouched.
Docs (driver-model graph, README layout, drivers.md, the FHS note) follow the
new path and names.
zig build + test green; virtio-gpu, display-native, display-reattach, usb-hid,
usb-hub, usb-storage, pci-scan pass.
Finish the direct-import convention: a protocol is now aliased to its module
name in snake_case in every file that imports one — consumers and the runtime
client wrappers alike. This kills the last of the alias variety (the generic
`protocol`, plus `power` and `transfer`), so `device_manager_protocol.Hello`
means the same thing everywhere and grepping a module name finds all its uses.
Pure rename (identifier uses only; prose references left untouched via a
guarded pattern). 14 files, 299/299 lines.
zig build + test green; 16 QEMU cases pass (smoke, device-manager,
driver-restart, device-list, pci-scan, usb-hid, usb-storage, display-service,
display-native, display-reattach, input, acpi-ps2, vfs, fat-mount,
power-button, orderly-shutdown).
device-manager-protocol -> library/protocol/device-manager/. Its consumers
(pci-bus, usb-xhci-bus, the acpi discovery service, device-manager, device-list,
crash-test, and the not-yet-built intel-integrated display sub-driver) import the
module directly instead of through runtime.device_manager_protocol, which is
deleted. runtime.device_manager (the hello client) already imported the module
by name and is unchanged.
zig build + test green; device-manager, driver-restart, device-list, pci-scan pass.
Start the protocol tree: wire protocols move to library/protocol/<name>/,
entry file <name>-protocol.zig, module name unchanged. block and usb-transfer
are pure moves — every consumer already imports them by module name, so only
the b.addModule paths change and the empty system/services/block/ is removed.
block-protocol -> library/protocol/block/block-protocol.zig
usb-transfer-protocol -> library/protocol/usb-transfer/usb-transfer-protocol.zig
zig build + test green.
Every supervised driver owes the device manager a hello at startup, and
the retry-lookup-call-check for it had been copied into five drivers:
usb.helloManager (misfiled in the USB client) plus hand-rolled twins in
display, virtio-gpu, pci-bus, and usb-xhci-bus.
Extract it once as a runtime client, runtime.device_manager.hello(role,
device_id) ?Handle — returns the manager endpoint (bus drivers keep it to
report children through), null when there is no manager or it refused the
handshake, and logs the outcome itself so each call site is one line.
Also correct two roles while collapsing their calls: virtio-gpu and the
display driver each claim one PCI function and report no children, so they
are Role.device, not Role.bus. The manager ignores role today, so this is
cosmetic, but it matches the protocol's own definition (bus = reports
children via child_added).
Behavior-preserving otherwise: pci-bus and usb-xhci-bus move their hello
logging from raw serial writes to std.log, which the kernel renders with
the same "<path>: " prefix, so driver-restart still matches
"usb-xhci-bus: hello acknowledged". zig build clean; 8 QEMU cases pass
(driver-restart, pci-scan, usb-hid, usb-storage, virtio-gpu,
display-reattach, device-list, device-manager).
The compound-hub investigation is resolved (Keychron keyboard + ROG
mouse enumerate through the Genesys USB2 companion hub and type on real
hardware). Turn the debugging spam back down for main: the full 22-port
PORTSC dump runs only when a scan finds NOTHING (a 'why is this empty'
aid), not every boot; a downstream hub port logs only when a device
actually appears or leaves, not for every empty seed-sweep port. The
readable device names, class names, and port-change events stay.
Real-hardware root-cause, from the now-readable log: the tick-poll fix
DID catch the user's full-speed devices (USB2 root ports 3, 9, 11
'device appeared — Full-speed'), but every one failed 'Address Device
completion code 4' = USB Transaction Error. Cause: danos addressed the
device immediately after the port reset, but USB 2.0 (spec 7.1.7.5)
requires a reset-recovery interval (TRSTRCY, 10 ms) before a device
answers SET_ADDRESS. QEMU tolerates the omission; real full-speed
devices do not.
setupDevice now waits 10 ms after a port reset before addressing, and
addressDeviceCommand retries up to 3 times on a transaction error,
re-resetting a root-port device between attempts (xHCI 4.6.5 recovery).
QEMU USB cases still green. Real-hardware confirmation pending — this is
the specific fix for the user's keyboard/mouse failing to address.
Make the USB diagnostic logs scannable by eye:
- usb-ids gains speedName + linkStateName (USB3 PORTSC link states: U0,
RxDetect, Polling, ...), host-tested with usb-ids.
- The PORTSC dump decodes the register instead of printing hex flags:
PORTSC[3] 0x00021203: connected, enabled, link=U0, power=on, SuperSpeed
PORTSC[5] 0x00020ee1: connected, disabled, link=Polling, power=on, High-speed
(the raw word stays for reference). A USB2 device reads connected+
disabled+Polling until reset — so the user's next log shows at a glance
whether the companion port ever reaches that state.
- The library reads STRING descriptors (readString, UTF-16LE -> ASCII,
English langid), and the device line now names the maker + product:
port 5 device: Hub "Genesys Logic USB3.0 Hub" (0x05e3:0x0626), 1 interface(s)
instead of a bare vendor/product id pair.
Full USB case set green (hub regexes follow the new 'device: <class>
"<maker> <product>"' format). Branch diagnostics for the SuperSpeed
compound-hub investigation.
The logs read 'class 9/0/0' where they could say 'Hub'. usb-ids gains
className (a device/interface class byte -> 'Hub', 'HID', 'Mass Storage',
...) and interfaceName (a HID boot interface -> 'HID boot keyboard' /
'HID boot mouse'), both host-tested with usb-ids. The bus driver's
enumerate + register lines now read, e.g.:
port 21 device: Hub vendor 0x05e3 product 0x0626, 1 interface(s)
port 21 interface 0: Hub (9/0/0) registered as device 47
port 5 interface 0: HID boot keyboard (3/1/1) registered as device 32
so a real-hardware log is scannable by eye. Full USB case set green
(hub regexes follow the new 'device: <name>' format).
Real-hardware root-cause: the user's keyboard works in the firmware boot
menu but dies under danos. The port dump shows why — danos scans the
root ports ~3 ms after the controller reset, but a USB2 connection needs
~100 ms to debounce, so the boot scan sees the USB2 companion hub's port
empty (all USB2 ports ccs=0), while the SuperSpeed devices (hub, storage)
train instantly and DO show up. danos then relied on a Port Status
Change EVENT to catch the late USB2 connection, which does not fire
reliably on this hardware.
The tick now polls every root port and reconciles on the empty->connected
EDGE (previous-state tracked per port, seeded from the boot scan so
already-up ports never re-fire), bringing up a device that appears after
the scan without depending on the event. Edge-triggered so a port that
fails to enumerate is not retried every 8 ms. Branch-only until the
keyboard is confirmed on real hardware; the diagnostic dumps stay for
the next boot.
The USB2 companion hub carrying the user's full-speed keyboard never
appears — only the SuperSpeed hub (port 19) and SS storage (port 21)
connect. To find where the USB2 root ports are and whether the companion
is presenting on one, walk the xECP Supported Protocol capabilities
(logging each USB 2.0 / 3.0 root-port range) and dump every port's raw
PORTSC unconditionally (ccs/ped/pls/pp/speed). QEMU confirms the dump
(USB2 ports 5-8, USB3 ports 1-4). Branch-only diagnostic.
Branch-only debugging for the real SuperSpeed compound hub: the spin fix
(27f87cb) stopped the hang — the SS hub's 4 SuperSpeed ports now enumerate
(all empty, correct: the full-speed keyboard isn't a SuperSpeed device) —
but the USB2 COMPANION hub, where the keyboard actually lives, never
appears. Only root ports 19 (SS hub) and 21 (SS storage) connect.
Dump every root port's raw PORTSC at scan (connect/enable/link-state/
speed) and log every root port-change event, so the next boot shows
whether the companion is connected on a USB2 port we misread, connects
late as a port-change event, or is simply absent. Diagnostic logging —
to be removed once the companion path works.
Real-hardware finding: a SuperSpeed hub (the user's Genesys, 4 SS
downstream ports) HUNG the bus driver at boot — it stopped logging with
no fault, and the hub's port power dropped. Cause: a SuperSpeed hub has
change bits a USB2 hub lacks (link-state, BH-reset), and the B4 servicing
— written and tested against QEMU's USB2 hub — never cleared them, so
the hub's status-change endpoint re-reported the same port forever and
the driver spun servicing it, never reaching the USB2 companion hub
where the full-speed keyboard actually lives.
hubPortStatusAck now clears the SuperSpeed-only change features too
(gated on hub speed; a USB2 hub is unaffected), and the tick services a
bounded batch of hub changes (32) before yielding — so even if a hub's
change bits misbehave, the driver cannot spin the machine. A per-port
status log line surfaces exactly what a hub reports, so the next real
boot shows the SS hub's port states and whether the USB2 companion
enumerates. QEMU usb-hub cases still green (the SS clears are gated off
for QEMU's USB2 hub).
Completes hub support (docs/usb-hub.md). On the bus tick, a downstream
hub-port change now dispatches: a connect enumerates the new device
(B4b), a disconnect tears the old one down — recursively, since a hub
that leaves takes its whole subtree with it (children first), reporting
each interface ChildRemoved and Disable-Slotting the device. Route
strings compose across tiers, so a device two hubs deep enumerates with
a two-tier route.
QEMU's hub — unlike root-port hot-plug — DOES raise downstream
status-change events, so both paths are harness-tested: usb-hub (a
keyboard behind a hub binds usb-hid-keyboard), usb-hub-nested (a
keyboard two hubs deep), usb-hub-unplug (device_del behind the hub tears
it down). Full suite 91/91.
Real-hardware validation of the user's SuperSpeed Genesys hub with
full-speed devices on its USB2 companion is flagged for the user (QEMU's
USB2 hub does not model the compound USB3 hub).
The core of hub support (docs/usb-hub.md): a device on a hub's
downstream port now reaches its class driver exactly like one on a root
port. The hub's interrupt status-change endpoint is armed with an
in-process subscription — completions set the hub's pending-port mask
instead of queuing a class-driver report — and setupHub seeds every
downstream port pending so a STATIC topology (a device present at
power-on) enumerates without waiting on the initial interrupt edge.
On the bus tick, each pending hub port is serviced: GET_STATUS + clear
the change bits, and on a connect reset the port, read the speed, then
enable a slot and Address Device with the composed route string
((parent_route<<4)|port), the inherited root port, and the parent hub's
slot/port as the TRANSACTION TRANSLATOR — so the controller routes a
full/low-speed device's split transactions through the hub's TT. The
device then enumerates and registers its interfaces through the normal
path (a compact topology-unique port key keeps the id tag within its
8-byte cap), recursing setupHub if it is itself a hub.
Verified in QEMU (a keyboard behind a USB2 hub on a second controller):
'hub slot 1 port 1 device vendor 0x0627 ... usb-hid-keyboard: ok
(device 35)'. Full suite 89/89. The user's SuperSpeed Genesys hub +
full-speed keyboard/mouse on its USB2 companion is the real-hardware
target, flagged separately.
First slice of hub support (docs/usb-hub.md), handled IN the xhci-bus
because a device behind a hub is reached by the CONTROLLER via a route
string in its slot context — topology only exists inside the driver
that owns the controller. When the scan enumerates a class-9 device it
now calls setupHub: read the hub descriptor for the downstream port
count and TT arrangement, tell the controller the slot is a hub
(Configure Endpoint with the slot add-flag sets the Hub bit, Number of
Ports, and MTT/TT-Think-Time per xHCI 4.6.6), SET_HUB_DEPTH for a
SuperSpeed hub so it can compose route strings, and SET_FEATURE
PORT_POWER every downstream port.
The Device gains topology fields (route string, root port, parent hub
slot/port for the TT) and buildAddressInputContext now fills them, so
the Address Device path is ready for downstream devices — those are
enumerated in B4b. A root-port device gets route 0 and its own port as
the chain root, unchanged behavior.
Verified in QEMU with a hub on a second controller and a device behind
it (a usb-hub QEMU case, since the boot controller's auto-assigned
devices collide on the low ports): 'hub slot 1: 8 downstream ports
powered (USB2 single-TT)'. Full suite 89/89. The user's SuperSpeed
Genesys hub is the real-hardware target, flagged separately (QEMU's
USB2 hub doesn't model the compound USB3 hub).
Regression from the B3 MPS0 work, caught on real hardware: a SuperSpeed
hub (and the SuperSpeed boot stick) failed to enumerate. bMaxPacketSize0
(device descriptor byte 7) is a LITERAL size for USB 2.0 and below
(8/16/32/64) but an EXPONENT for SuperSpeed (9 = 2^9 = 512). The refresh
read the exponent 9 as a size and issued Evaluate Context to set EP0 to
9 bytes, corrupting the control endpoint so every following transfer
failed. SuperSpeed's EP0 is fixed at 512 and needs no correction, so
the refresh is now skipped for speed >= 4; only full/low/high speed,
where the field is a literal that can differ from the speed default,
still run it. QEMU tolerated the wrong MPS0 — real silicon does not
(the class of bug the harness can't reach, flagged real-HW-pending).
This likely also explains intermittent no-storage/no-logs on a normal
boot: the boot stick is SuperSpeed and hit the same corruption. Full
suite green (orderly-shutdown's lone failure was its known QMP-timing
flake — three clean re-runs).
B3 — the runtime lifecycle a hot-pluggable bus needs, plus two init
fixes that runtime device arrival depends on:
- pump() now handles PORT STATUS CHANGE events (silently dropped
before): it queues the port, and the bus driver brings the port up
(a device arrived) or tears it down (a device left) on its tick —
reporting each interface ChildRemoved to the device manager, which
prunes the node, notifies watchers, and lets the class driver's world
end honestly, then Disable Slot frees the controller-side state.
- ALL root-hub ports are powered at init, not just those with a
boot-time device: an unpowered port (PP=0) cannot signal a later
connect, so a hot-plug would never be seen.
- the interrupter is enabled (IMAN.IE + USBCMD.INTE) while the ring
stays polled — some controllers only WRITE runtime events to the
ring when the interrupter is enabled.
Real-hardware validation is flagged for the user: QEMU's qemu-xhci does
not raise a runtime port-change event to a polling driver on device_add,
so the end-to-end hot-plug path can't be exercised in the harness (the
port-change handling itself IS proven — a late boot device's PSCE is
caught and acked). The harness gained qmp_sequence (multi-step QMP
injection with arguments) for when a drivable case exists. Full suite
88/88; the working USB path (enumeration, HID, storage) is unregressed
by the port-power and interrupter changes.
Two real-hardware correctness fixes from the M20 list, both invisible
to QEMU's forgiving controller:
refreshMaxPacketSize0 existed only as a comment. The EP0 context kept
the SPEED-DEFAULT max packet size (full-speed: 8) even when the device
declares 16/32/64 — real controllers fault the very first full
descriptor read on the mismatch, which is the standing suspect for
full-speed mice dying on the user's PC. Enumeration now probes the
device descriptor's first 8 bytes (deliverable at any legal MPS0),
and issues Evaluate Context to correct EP0 before any longer transfer,
naming the failure and codes if the controller refuses.
And a USB2 port's PORTSC speed field is only meaningful once the port
reset ENABLES the port: the speed (and the MPS0 default derived from
it) is now sampled after the reset instead of trusting the connect-time
read.
B2 — the 1-in-3 boot-time READ CAPACITY failure, root-caused: the xHCI
library's awaitTransfer claimed ANY unclaimed transfer event as its own
completion. An interrupt-endpoint event whose TRB pointer no longer
matched the armed subscription (an error or stale completion from the
keyboard/mouse polling concurrently with storage bring-up) fell through
and was misread as the bulk transfer's completion — desynchronizing the
mass-storage bulk protocol in controller state that SURVIVED driver
restarts, so every retry failed too. Awaited transfers now match the
event's slot id and endpoint DCI; foreign events are dropped and named.
Twelve consecutive runs of the previously-flaky cases pass; the full
suite is green with none of its old intermittents.
B1 — and when storage does fail transiently, the system now heals
instead of giving up forever: a nonzero exit maps to ExitReason.aborted
(a deliberate FAILURE exit — supervisors restart those with backoff,
unlike a clean .exited), usb-storage exits nonzero when a PRESENT
device fails bring-up, and the fat service no longer blocks its harness
polling for a block device and then dies — it serves immediately
(requests fail politely), retries on a 500 ms timer, and mounts
whenever storage appears, including after a driver restart.
Real-PC diagnose boot (photo + OCR): the boot stick connects at
SuperSpeed on port 21 and 'device setup failed' lands in the SAME
millisecond — an instant failure, not a timeout. setupDevice reset
every port unconditionally; that is required to enable USB2 ports, but
a SuperSpeed port that trained its link is ALREADY enabled (xHCI
advances USB3 ports to Enabled, no reset — spec 4.3), and driving a hot
reset into the live link drops PED mid-reset on real silicon. QEMU
tolerates the spurious reset, which is why the harness never saw it.
An enabled speed>=4 port now skips the reset (a not-yet-enabled SS link
still gets one). Every setup step names its failure — port reset with
the PORTSC value, Enable Slot, device-slot exhaustion, Address Device
with its completion code — so the on-screen transcript of the next
failure identifies the exact xHCI command instead of one blanket line.
block.open's give-up window drops 60 s -> 30 s (the slowest observed
healthy chain completed at ~24 s); a machine whose stick failed setup
should not sit a further minute pretending otherwise.
library/runtime/log.zig wires std.log to the tagged ring: the root shim
installs std_options for every binary (programs may override), logFn
formats one line per record and emits it with its level via
debug_write — the payload no longer carries the process's name; the
kernel stamps identity structurally and the serial renderer prints the
'<binary path>: ' prefix, so the transcript keeps its shape.
Migrate every writeLine/logLine/log helper family (init, vfs, fat,
device-manager, acpi, pci-bus, ps2-bus x3, usb-hid x2, usb-storage,
usb-xhci-bus, virtio-gpu — 104 call sites) to std.log.info, dropping
the hand-written prefixes. A leveled record is a complete line by
contract (raw emissions may still build lines from pieces). Test
fixtures and the display/input services keep raw writes for now — their
ring records are attributed by the kernel regardless.
Harness regexes follow the renamed prefixes (usb-hid-keyboard,
discovery) and path-named restart lines.
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
The root-hub scan logged the raw PORTSC port-speed class ("speed class 3").
Decode it to a human name — Low/Full/High/SuperSpeed/SuperSpeedPlus with the
USB generation and line rate — so the boot log says what enumerated on each
port, the USB analog of the pci-bus class line. This is the link speed only;
the device class/subclass/protocol needs descriptor reads (the USB track).
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
Daniel Samson
danielandClaude Opus 4.8