Add an AttachStatus enum to ps2-library.zig for AttachReply.status,
distinguishing the three failure causes handleAttach previously
collapsed into a bare -1: invalid_request (message too short),
missing_endpoint (no capability passed), and no_such_device (no port
identified the requested device type). The keyboard and mouse drivers
check against AttachStatus.ok rather than a literal 0.
Replace the mouse driver's synthetic stream with the real path, the
way the keyboard was wired:
- The auxiliary port's IRQ12 is enumerated on the mouse's own ACPI
node (PNP0F13), and the kernel only lets a device's claimer bind or
ack its IRQs — so ps2-bus now claims that node alongside the
controller whenever port 2 carries a device, binds IRQ12 to its one
endpoint, and re-arms whichever line the notification's badge names.
The forwarding loop already routed auxiliary bytes by status bit 5.
- mouse-packet.zig (new, pure, host-tested): three-byte stream-mode
packet assembly — bit-3 sync with resynchronization, ACK/BAT bytes
dropped at packet start, nine-bit two's-complement movement,
overflow packets discarded, and PS/2 positive-Y-up converted to the
screen convention (positive down).
- mouse.zig mirrors the keyboard driver: no hardware claim, attaches
to the bus as its mouse, and publishes button_down/button_up per
changed button plus motion events with the pressed-button mask.
Verified end to end in QEMU via monitor mouse_move/mouse_button:
motion round-trips in screen coordinates, buttons transition with the
right mask, and keyboard events keep flowing alongside. The follow-up
is the IntelliMouse magic-knock for a scroll wheel (four-byte packets)
and scroll events.
Replace the keyboard driver's synthetic stream with the real path:
- ps2-bus binds IRQ1 (interrupt bits set only after the bind), drains
port 0x60 on each interrupt, and forwards every byte to the attached
child driver over async ipc_send, routed by the status register's
auxiliary-output bit. Children attach via the new well-known ps2_bus
service, handing over their endpoint as a capability.
- scancode.zig (new, pure, host-tested): scancode set 2 -> USB HID
usage decoding (F0/E0/E1 prefix state machine) plus keyboard state —
pressed-key bitmap, typematic-repeat classification, modifier and
caps-lock tracking.
- keyboard.zig decodes the forwarded stream and publishes real
key_down/key_press/key_up events, filling key_press characters via
xkeyboard-config (layout from argv[2], default us) and synthesizing
ASCII control characters for Enter/Tab/Backspace/Escape.
- protocol.zig names the full HID usage set in Keycode; build.zig
threads the xkeyboard-config module into user binaries.
Verified end to end in QEMU via monitor sendkey: shift, caps lock,
and control-character synthesis all decode correctly. The mouse
driver still publishes its synthetic stream; attaching it to the
bus the same way is the follow-up.
Daniel Samson