Real-hardware root-cause: the user's keyboard works in the firmware boot
menu but dies under danos. The port dump shows why — danos scans the
root ports ~3 ms after the controller reset, but a USB2 connection needs
~100 ms to debounce, so the boot scan sees the USB2 companion hub's port
empty (all USB2 ports ccs=0), while the SuperSpeed devices (hub, storage)
train instantly and DO show up. danos then relied on a Port Status
Change EVENT to catch the late USB2 connection, which does not fire
reliably on this hardware.
The tick now polls every root port and reconciles on the empty->connected
EDGE (previous-state tracked per port, seeded from the boot scan so
already-up ports never re-fire), bringing up a device that appears after
the scan without depending on the event. Edge-triggered so a port that
fails to enumerate is not retried every 8 ms. Branch-only until the
keyboard is confirmed on real hardware; the diagnostic dumps stay for
the next boot.
Daniel Samson
0b10a637ae