danos/library/device/driver/driver.zig

//! library/device/driver — the driver author's interface: enumerate the kernel's device
//! table, claim a device, map its MMIO, bind its interrupt (the claim is the capability the
//! kernel checks before mapping registers or routing an IRQ), and say `hello` to the device
//! manager at startup. The whole kernel + manager surface a driver needs, in one import.

const std = @import("std");
const abi = @import("abi");
const device_abi = @import("device-abi");
const sc = @import("system-call");
const channel = @import("channel");
const envelope = @import("envelope");
const ipc = @import("ipc");
const time = @import("time");
const device_manager_protocol = @import("device-manager-protocol");

pub const DeviceDescriptor = device_abi.DeviceDescriptor;
pub const ResourceDescriptor = device_abi.ResourceDescriptor;
pub const DeviceClass = device_abi.DeviceClass;
pub const ResourceKind = device_abi.ResourceKind;

inline fn failed(r: usize) bool {
    return r > ~@as(usize, 0) - 4095;
}

/// The errno inside a failed return. Only meaningful when `failed(r)`.
inline fn errnoOf(r: usize) i64 {
    return -@as(i64, @bitCast(r));
}

// The envelope restates the kernel's errno numbering by hand, because the
// `protocol` package deliberately depends on nothing (so it cannot import `abi`).
// This module is one of the few that can see both halves, so it is where they are
// held together: drift becomes a compile error here rather than a driver reporting
// the wrong reason for a refusal. Anything linking a driver compiles this.
comptime {
    if (envelope.ENOENT != abi.ENOENT) @compileError("envelope.ENOENT has drifted from abi.ENOENT");
    if (envelope.ENOSPC != abi.ENOSPC) @compileError("envelope.ENOSPC has drifted from abi.ENOSPC");
    if (envelope.EPERM != abi.EPERM) @compileError("envelope.EPERM has drifted from abi.EPERM");
    if (envelope.ENOSYS != abi.ENOSYS) @compileError("envelope.ENOSYS has drifted from abi.ENOSYS");
    if (envelope.EPROTO != abi.EPROTO) @compileError("envelope.EPROTO has drifted from abi.EPROTO");
    if (envelope.EBUSY != abi.EBUSY) @compileError("envelope.EBUSY has drifted from abi.EBUSY");
}

/// Copy up to `buffer.len` device descriptors into `buffer`; returns the total count.
pub fn enumerate(buffer: []DeviceDescriptor) usize {
    return sc.systemCall2(.device_enumerate, @intFromPtr(buffer.ptr), buffer.len);
}

/// Why a `claim` failed. Worth distinguishing: `AlreadyClaimed` means back off and
/// let the owner have it, `NoSuchDevice` means this id is stale and the caller should
/// re-enumerate, and `NotConfined` means the machine could not place the device under
/// IOMMU translation — the claim was rolled back, and that one is a fault report, not
/// a retry. `Refused` is an errno this library does not know a name for.
pub const ClaimError = error{ NoSuchDevice, AlreadyClaimed, NotConfined, Refused };

/// Take exclusive ownership of device `id`.
pub fn claim(id: u64) ClaimError!void {
    const r = sc.systemCall1(.device_claim, id);
    if (!failed(r)) return;
    return switch (errnoOf(r)) {
        abi.ENODEV => error.NoSuchDevice,
        abi.EBUSY => error.AlreadyClaimed,
        abi.ECONFINE => error.NotConfined,
        else => error.Refused,
    };
}

/// Map resource `resource_index` (which must be an MMIO window) of claimed device
/// `device_id` into this address space; returns the register base virtual address.
pub fn mmioMap(device_id: u64, resource_index: u64) ?usize {
    const r = sc.systemCall2(.mmio_map, device_id, resource_index);
    return if (failed(r)) null else r;
}

/// `DeviceDescriptor.parent` for a device with no parent.
pub const no_parent = device_abi.no_parent;

/// `DeviceDescriptor.pci_class` for a device that is not a PCI function. Set this on
/// descriptors passed to `register` unless the child really is one.
pub const no_pci_class = device_abi.no_pci_class;

/// Publish `descriptor` as a child of `parent_id`, which this process must have claimed.
/// Returns the new device id. The child is left unclaimed, so whichever driver owns
/// that class of device can `claim` it — that is how a bus hands off a device.
///
/// Every resource in `descriptor` must be **contained** in a parent resource of the same
/// kind: a sub-window of the parent's MMIO, or one of its IRQs. The kernel refuses
/// anything else, because a device descriptor is a licence to map physical memory and
/// a bus driver may only subdivide what it already owns. `descriptor.id` and `descriptor.parent`
/// are ignored. A device with no resources at all is fine — a USB device is reached
/// through its controller, not by MMIO.
pub fn register(parent_id: u64, descriptor: *const DeviceDescriptor) RegisterError!u64 {
    const r = sc.systemCall2(.device_register, parent_id, @intFromPtr(descriptor));
    if (!failed(r)) return r;
    return switch (errnoOf(r)) {
        abi.ENOSPC => error.TableFull,
        abi.ENODEV => error.NoSuchParent,
        abi.EPERM => error.NotYourParent,
        abi.E2BIG => error.TooManyResources,
        abi.ECHILDREN => error.ParentFull,
        abi.ERANGE => error.NotContained,
        abi.EFAULT => error.BadDescriptor,
        else => error.Refused,
    };
}

/// Why a `register` failed. These are not interchangeable and a bus driver should
/// say which one it hit: `ParentFull` and `TableFull` are different ceilings with
/// different fixes, and `NotContained` is not a ceiling at all — it means the child
/// resource escaped the window the parent actually owns. Reporting all of them as
/// one refusal is what made an AMD desktop boot with no USB and no storage, and gave
/// no way to tell which of three causes it was (docs/fixed-bounds-audit.md).
pub const RegisterError = error{
    TableFull, // the kernel's device table is full, machine-wide
    ParentFull, // this parent already holds as many children as it can
    NoSuchParent, // no device with that id
    NotYourParent, // that device exists but this process has not claimed it
    TooManyResources, // the descriptor declares more resources than one device may hold
    NotContained, // a resource escapes the parent's window
    BadDescriptor, // the descriptor pointer did not read back
    Refused, // an errno this library does not know a name for
};

/// Bind resource `resource_index` (which must be an IRQ) of claimed device `device_id` to
/// `endpoint`. From then on the interrupt arrives as an asynchronous notification:
/// `ipc.replyWait` on that endpoint returns with the high bit set in `badge` and the
/// low bits carrying the GSI. The kernel masks the line before waking you.
pub fn irqBind(device_id: u64, resource_index: u64, endpoint: usize) bool {
    return !failed(sc.systemCall3(.irq_bind, device_id, resource_index, endpoint));
}

/// Re-arm a bound IRQ. Call this **after** quieting the device (clearing whatever
/// status register holds its line asserted) — the kernel left the line masked
/// precisely because it could not do that for you. Skip it and the interrupt never
/// fires again; call it before the device is quiet and a level-triggered line storms.
pub fn irqAck(device_id: u64, resource_index: u64) bool {
    return !failed(sc.systemCall2(.irq_ack, device_id, resource_index));
}

/// The Message-Signalled Interrupt address/data a driver programs into its device's
/// MSI capability. The device raises the interrupt by writing `data` to `address`.
pub const Msi = struct { address: u64, data: u32 };

/// Set up MSI for a claimed device: the kernel allocates a per-device edge-triggered
/// vector, binds it to `endpoint` (delivered like `irqBind`, but with no mask and no
/// `irqAck` cycle), and returns the (address, data) to write into the device's MSI
/// capability — found by mmio_mapping the device's ECAM config space (resource 0) and
/// walking its capability list. Returns null on failure. Two return values (address in
/// rax, data in rdx), so a hand-written stub.
pub fn msiBind(device_id: u64, endpoint: usize) ?Msi {
    var rax: usize = undefined;
    var rdx: usize = undefined;
    asm volatile ("syscall"
        : [rax] "={rax}" (rax),
          [rdx] "={rdx}" (rdx),
        : [n] "{rax}" (@intFromEnum(abi.SystemCall.msi_bind)),
          [a0] "{rdi}" (device_id),
          [a1] "{rsi}" (endpoint),
        : .{ .rcx = true, .r11 = true, .memory = true });
    if (failed(rax)) return null;
    return .{ .address = rax, .data = @intCast(rdx) };
}

/// Map a delegated DMA-region (or shared-memory) capability into a claimed device's
/// IOMMU domain, so the device may DMA to that buffer. The caller must own `device_id`
/// and hold `handle` (received over IPC or from its own `dma.alloc(.. | shareable)`).
/// Idempotent. Returns true on success (and trivially when no IOMMU is present).
pub fn dmaBind(device_id: u64, handle: usize) bool {
    return !failed(sc.systemCall2(.dma_bind, device_id, handle));
}

/// Unmap a previously `dmaBind`'d buffer from the device's domain.
pub fn dmaUnbind(device_id: u64, handle: usize) bool {
    return !failed(sc.systemCall2(.dma_unbind, device_id, handle));
}

/// Drain and log any pending IOMMU translation faults, returning the count seen. A
/// diagnostic: a driver that suspects its device attempted an out-of-domain DMA (or a
/// test proving enforcement) forces the hardware's fault records to the log now. Returns
/// 0 when no IOMMU is present.
pub fn iommuFaultDrain() usize {
    return sc.systemCall0(.iommu_fault_drain);
}

/// Read `width` bytes (1, 2, or 4) from a port in a claimed device's `io_port`
/// resource, at byte `offset` within it. Ring 3 has no direct `in`/`out`, so a legacy
/// driver (PS/2, 16550 UART) reaches its ports through this claim-gated call — each
/// access is a syscall, which is fine for the low-rate hardware that needs it. Returns
/// null if the capability check fails (device not claimed, wrong resource, out of
/// range). A device that decodes no data returns all-ones, which is a valid value, not
/// a failure.
pub fn ioRead(device_id: u64, resource_index: u64, offset: u64, width: u8) ?u32 {
    const r = sc.systemCall4(.io_read, device_id, resource_index, offset, width);
    return if (failed(r)) null else @intCast(r);
}

/// Write `value` (its low `width` bytes, 1/2/4) to a port in a claimed device's
/// `io_port` resource, at byte `offset`. Same capability gate as `ioRead`.
pub fn ioWrite(device_id: u64, resource_index: u64, offset: u64, width: u8, value: u32) bool {
    return !failed(sc.systemCall5(.io_write, device_id, resource_index, offset, width, value));
}

/// Find DeviceDescription by hid
///
/// Utility function for driver development
pub fn findDeviceDescriptorByHid(buffer: []DeviceDescriptor, hid_needle: []const u8) ?DeviceDescriptor {
    const total = enumerate(buffer);
    const n = @min(total, buffer.len);
    for (@as([]DeviceDescriptor, buffer[0..n])) |d| {
        const hid_haystack = d.hid[0..@intCast(d.hid_len)];
        if (std.mem.eql(u8, hid_haystack, hid_needle)) {
            return d;
        }
    }

    return null;
}

// --- device-manager handshake (folded in from the former device-manager.zig) ---

/// What kind of driver is announcing itself (a bus that reports children, or a leaf
/// device). Re-exported so callers name it without importing the protocol.
pub const Role = device_manager_protocol.Role;

const lookup_attempts: u32 = 100;
const lookup_pause_ms: u64 = 20;

/// Say hello to the device manager and return its endpoint, or null if there is no manager
/// (best-effort standalone bring-up) or it refused the handshake. Bus drivers keep the handle
/// to report children through; a driver that runs fine unsupervised discards it with `_ =`,
/// and one that requires supervision bails on null. Logs the outcome itself.
///
/// The device this driver was assigned is the packet's `Header.target` — the manager's
/// object addressing, so `no_device` here is a driver that serves none.
pub fn hello(role: Role, device_id: u64) ?ipc.Handle {
    var attempts: u32 = 0;
    const manager = while (attempts < lookup_attempts) : (attempts += 1) {
        if (channel.openEndpoint("device-manager")) |handle| break handle;
        time.sleepMillis(lookup_pause_ms);
    } else {
        std.log.info("no device manager to hello", .{});
        return null;
    };

    var packet: [device_manager_protocol.message_maximum]u8 = undefined;
    const framed = device_manager_protocol.Protocol.encodeRequest(
        .hello,
        device_id,
        .{ .role = @intFromEnum(role) },
        &.{},
        &packet,
    ) orelse return null;

    var reply: [device_manager_protocol.message_maximum]u8 = undefined;
    const length = ipc.call(manager, framed, &reply) catch {
        std.log.info("hello call failed", .{});
        return null;
    };
    const status = envelope.statusOf(reply[0..length]) orelse {
        std.log.info("hello answered nothing readable", .{});
        return null;
    };
    if (status.status != 0) {
        std.log.info("hello refused", .{});
        return null;
    }
    std.log.info("hello acknowledged", .{});
    return manager;
}