New thread_self=42 syscall backs runtime.Thread.getCurrentId (the calling
thread's kernel task id). thread-test gains an id mode: two workers read
getCurrentId and the main thread confirms all three ids are non-zero and
distinct. Per-thread threadlocal TLS is deferred by design (no consumer; it would
need context-switched fs.base for an unused feature), as are RwLock/WaitGroup.
Marks the threading feature built (M1-M6): threading.md + docs/README.md status
updated, all thread-* cases wired into qemu_test.py.
Gate thread-id PASS; full suite green: 21/21 (thread-spawn/join/futex/mutex/id,
aspace-refcount, + 15 guardrail cases), zig build clean, zig build test green.
runtime.Thread.Mutex is the classic three-state futex mutex (unlocked/locked/
contended): the fast path is a single CAS and only a contended lock enters the
kernel. Condition is a futex sequence counter (wait/timedWait/signal/broadcast,
spurious wakeups allowed, use in a predicate loop); a signal racing the unlock
bumps the seq so it is never missed. Semaphore is permits guarded by
Mutex+Condition. All mirror std.Thread's shapes, ported onto runtime.Thread.Futex.
thread-test gains a mutex mode: 2 producers + 2 consumers move 2000 unique items
through an 8-slot ring (small enough that both sides block); the consumed
checksum and tally match exactly, proving the lock and condvars correct under
real cross-core contention.
Deferred with rationale (see docs/threading-plan.md): migrating join to a futex
completion word needs kernel clear-on-exit (else use-after-free munmapping a live
stack); host unit tests need a mockable Futex seam.
Gate thread-mutex PASS (3x); 17 guardrail/thread cases green; build + host tests
clean.
New private syscalls futex_wait(addr, expected, timeout_ns)=40 and
futex_wake(addr, count)=41. A waiter is a .blocked task tagged with
Task.futex_addr (no queue linkage); futex_wait reads the user word under the big
lock and parks only if it still equals expected, so a concurrent wake can't slip
between the check and the block. futex_wake scans the task table and readies up
to count waiters in the same address space. A timed wait also sets wake_at so the
existing wakeExpired times it out; futex_addr staying non-zero (only futex_wake
clears it) distinguishes timeout from a real wake. Waiters park in-kernel, so an
idle core still halts (no busy-wait).
runtime.Thread.Futex mirrors std.Thread.Futex (wait/timedWait/wake). thread-test
gains a futex mode: a waiter parks, the main thread wakes it (serial order
waiting/waking/woke, asserted by the case regex), and timedWait reports a
timeout.
Gate thread-futex PASS (3x); 18 guardrail cases green incl. sleep/event/ipc
blocking paths; build + host tests clean.
thread_spawn takes a 4th arg, an exit-endpoint handle: spawnThreadSupervised
resolves and refcounts it under the spawn lock (like spawnProcessSupervised), so
a thread's death posts a child-exit notification carrying its tid. runtime
Thread.join blocks in replyWait on that (private) endpoint for its tid, then
munmaps the stack; detach relinquishes the join (stack reclaimed at process
exit, for now). New current_core=39 syscall + Thread.currentCore() lets a worker
observe which core it ran on.
The closure now lives at the top of the thread's own (private) stack instead of
the heap, so spawn/join never touch the not-yet-thread-safe runtime heap.
thread-test gains a join mode: 4 workers x 100k atomic increments, joined, with
counter == N*K and >1 core stamped (real parallelism), plus a detached worker.
Gate thread-join PASS (4x, non-flaky); 17 guardrail/M1/M2 cases green; build +
host tests clean.
A thread is a task sharing the caller's address space. New private syscalls
thread_spawn(entry, stack_top, arg)=37 and thread_exit=38: thread_spawn goes
through scheduler.spawnThread (retains the shared aspace), thread_exit ends the
task like a process exit(0) (terminateCurrent -> releaseAspace, so the space
survives while siblings hold it). The closure pointer reaches the new thread in
rdi via a new jump_to_user_arg asm path and a per-task user_arg (0 for a normal
process, whose _start ignores it) - so the runtime trampoline is a plain C-ABI
Zig function, no naked asm.
runtime.Thread (library/runtime/thread.zig) mirrors std.Thread.spawn: mmap a
stack, heap-allocate the args closure, hand the kernel the trampoline + closure.
addThreadedUserBinary opts a binary into single_threaded=false; thread-test is
the first, and proves a worker runs in the shared address space via a shared
global the main thread polls.
Gate thread-spawn PASS; 16 guardrail cases green (incl. args/init/process on the
new jump_to_user_arg path) + aspace-refcount; build + host tests clean.
Route address-space lifetime through a refcount keyed by the page-table root
(scheduler.zig aspace_refs): retainAspace on the spawnUserLocked success path,
releaseAspace from both teardown paths (exitUserLocked, destroyTaskLocked),
destroying the space only when the last task on it exits. Behaviour is identical
today (every space has exactly one task); this is the foundation shared-address-
space threads (docs/threading.md) build on.
Test-observable liveAspaceCount/aspaceDestroyCount + a new aspace-refcount kernel
self-test and QEMU case: spawn and reap 5 ring-3 probes, assert live spaces return
to baseline and destructions advance by exactly 5 (destroyed once each, no leak,
no double-free). Gate passes; 13 guardrail cases green; build + host tests clean.
pciScanTest put three [64]DeviceDescriptor arrays on the stack; at 328
bytes each that is a 66,096-byte frame, larger than the 64 KiB bootstrap
stack the boot context runs on, so the prologue overflowed the stack and
triple-faulted on entry before the test could print anything — the CPU
reset with no exception line. Reuse one descriptor buffer (frame ~21 KiB).
With the fault gone, the restart-drill checks proved flaky. They polled
process.write_buffer (which holds only the latest write-syscall message)
for the transient restarting/re-scan lines, which the concurrent
class-driver output overwrote before the starved low-priority poller could
observe them. The kernel broker count can't witness the restart either:
register is idempotent and the table has no unregister, so the count is
invariant across kill/prune/respawn.
Follow the sibling restart drills (usbReportTest/driverRestartTest): assert
the ordered drill in the harness regex over the full serial log (a
backreference requires the respawn to re-scan the same count), and keep only
race-free broker checks in the kernel — empty before the scan, populated
once it settles, never growing past N — sampled via scheduler.sleep at a
fixed cadence instead of a busy-poll.
The compositor now survives the virtio-gpu driver dying and re-attaches when device-manager
restarts it — the last piece of display v2.
Three parts:
- The driver hellos the device manager (role: bus). It never did, so the manager — which
spawns it supervised and expects a hello — was stopping it at the 3s hello deadline every
run (the gate markers just printed first). Now it is properly supervised: not stopped for
silence, and restarted on death.
- A kernel IPC fix so a call to a dead service errors instead of hanging. An endpoint records
its owner; when that task dies, its registered endpoints are marked dead (and any parked
senders woken with -EPEER), so ipc_call returns -EPEER rather than blocking on a reply that
will never come. Without this the compositor's first present after the driver died blocked
forever. General robustness — any client of any service benefits.
- The compositor re-attaches. Its .scanout calls now fail cleanly (caught), freezing the last
frame; when the restarted driver re-announces, attach_scanout detects the backend is already
virtio and logs "scanout re-attached", mapping the fresh shared surface and re-looking-up
.scanout. (The previous shm mapping leaks — no shm_unmap syscall yet — but its frames are the
dead driver's, reclaimed on exit.)
- device-manager gains a "test-scanout-restart" mode (like test-usb-restart) that kills the
virtio-gpu driver once after it hellos; the displayReattachTest kernel scenario drives it.
Gate: python3 test/qemu_test.py display-reattach — "scanout upgraded to virtio-gpu" then
"scanout re-attached", no CPU exception, passing 3/3. host tests, ipc/ipc-call/ipc-cap,
supervision, shm, display-service, display-demo, virtio-gpu, display-native, and
display-modeset all pass; default zig build clean. v2 (V1-V6) complete.
The native backend can now change resolution and presents tear-free.
Mode-setting without churn. The driver sizes its scanout resource + shared surface to the
largest mode it offers and treats a mode change as re-pointing the scanout rectangle within
that surface — so the resource, its backing, and the shared mapping never change, and the
surface's row stride (the max width) is fixed while the active width/height move. The
compositor is handed that stride in the announce and composes at it; a smaller mode just
paints the top-left rectangle. This sidesteps the surface re-share a true resolution change
would otherwise need (the service harness can't reply with a capability).
- scanout-protocol gains get_modes + set_mode; the driver offers {640x480, 800x600} and
re-points set_scanout on set_mode.
- backend.VirtioGpu carries the surface stride, exposes modes()/setMode(), and reports
canModeSet = hasVsync = true.
- runtime.display gains modes()/setMode() (display-protocol get_modes/set_mode, forwarded to
the backend) — the client-facing API.
- EDID: the driver negotiates VIRTIO_GPU_F_EDID when the device offers it, reads the monitor's
EDID, and logs its preferred mode (parsed from the first detailed timing descriptor).
- vsync: every resource_flush is fenced (VIRTIO_GPU_FLAG_FENCE); the device signals the fence
when the frame is on screen, which the used-ring ack the synchronous present already waits
on gates — so a completed present is a tear-free one.
After the native upgrade the compositor runs a one-shot mode-set self-check: query the modes,
switch to a different one, re-composite, and confirm the backend reports the new geometry —
the gate's markers.
Gate: python3 test/qemu_test.py display-modeset (reuses the display-native boot) — "display:
mode set to 800x600, verified" + "display: vsync present ok", passing 3/3. host tests,
display-service, display-demo, shm, virtio-gpu, and display-native still pass.
The compositor now boots on the GOP framebuffer and upgrades to the virtio-gpu driver
the moment it announces itself — the pluggable-scanout payoff.
The shared surface. The scanout resource is an shm region the driver creates
(shm_physical, a new syscall, hands it the guest-physical for attach_backing) and passes
to the compositor as a capability. The compositor maps it and composites straight into
it: on x86 DMA is cache-coherent, so the cacheable shared pages the CPU paints are exactly
what the device transfers-and-flushes — no copy, no explicit flush.
The handshake. After bring-up the driver looks up .display and sends attach_scanout with
the geometry + the surface capability. The compositor maps the surface, looks up the
driver's .scanout endpoint itself (the driver registered it — no need to pass it), switches
to backend.VirtioGpu, and re-composites the current frame. present() over the native
backend is a present request on .scanout -> transfer-to-host + resource flush. The first
native present is deferred to a one-shot timer: presenting inline from the announce handler
would deadlock, since the driver is still blocked on our reply and not yet serving .scanout.
After it lands, the compositor reads a pixel back from the shared surface to confirm the
frame reached the device's backing.
- shm_physical (syscall 36) + runtime.shm.physical.
- scanout-protocol (the compositor->driver present channel), separate from the
client-facing display protocol; the display protocol gains attach_scanout.
- backend.VirtioGpu joins backend.Gop in the tagged union; select() still boots GOP.
- the virtio-gpu driver's scanout backing is now shm (was DMA); it announces + serves
.scanout present requests (transfer-to-host + flush of the shared surface).
Also fixes a latent framebuffer-geometry corruption the display service hit only when it
enumerated the device tree alongside a busy device-manager: Gop.init now captures the
geometry into a small value the instant device_enumerate returns (rather than re-reading
the 328-byte descriptor across the later claim/mmio_map syscalls) and retries on a zero
geometry. The underlying device-table clobber is a separate kernel bug, tracked apart.
Gate: python3 test/qemu_test.py display-native (QEMU -device virtio-gpu-pci) — "display:
scanout upgraded to virtio-gpu" + "display: native present verified" + "display-demo: ok",
passing 3/3. host tests, display-service, display-demo, shm, and virtio-gpu still pass.
The first native scanout backend's driver half. The device manager matches the
virtio-gpu PCI function by its Display/Other class triple and spawns the driver,
which claims the device, confirms vendor 0x1AF4/device 0x1050 from config space,
enables memory-space + bus mastering, and walks the virtio vendor capabilities to
find the common-config and notify structures in its BAR.
From there it is the standard modern-virtio bring-up: reset, negotiate VERSION_1,
stand up the control virtqueue in coherent DMA, then drive the GPU end to end —
RESOURCE_CREATE_2D, ATTACH_BACKING (a coherent DMA buffer; V4 swaps in the shm-
shared surface), SET_SCANOUT, paint a known pattern, TRANSFER_TO_HOST_2D,
RESOURCE_FLUSH, and wait for the device's used-ring ack. Reading the backing back
proves it is CPU-visible RAM; the ack proves the device consumed the frame —
together the automated stand-in for "it's on screen", no screenshot.
- system/drivers/virtio-gpu/: the driver, plus virtio-gpu-protocol.zig (control
commands) and virtio-pci.zig (the 1.0 PCI transport + split-virtqueue), both with
host-tested struct sizes.
- device-manager matches the display/other class triple to "virtio-gpu"; the driver
self-confirms the vendor/device id, since the class alone cannot distinguish it.
- ServiceId.scanout (11): the driver registers it so the compositor finds it in V4.
Gate: python3 test/qemu_test.py virtio-gpu (QEMU -device virtio-gpu-pci) — the
device-manager stack discovers the function, the driver brings up a 640x480 scanout
and flushes a test pattern: "virtio-gpu: scanout 640x480 online" + "flush acked,
pixel check ok". host tests, display-service, shm, and device-list still pass.
Note: the pre-existing pci-scan case triple-faults on main (verified at 88ad432,
before this change); it is unrelated and tracked separately.
Generalize capability passing from endpoints to memory objects. The per-task
handle table now holds kind-tagged entries (scheduler.HandleObject{kind, ptr});
closeHandles and shareCapability dispatch by kind, so a shared-memory object
rides an ipc_call send_cap exactly like an endpoint and is refcount-freed only
when its last capability drops.
- shm_create(len) -> vaddr, handle: contiguous, zeroed, cacheable frames wrapped
in a refcounted ShmObject, mapped into the caller's shm arena (PML4[230]).
- shm_map(cap) -> vaddr: map the same physical pages into a receiver that got the
capability. mapUserSharedInto maps WB-cacheable + device_grant, so a sharer's
teardown never frees the shared frames — the object owns them.
- runtime.shm: create(len) -> Region{ptr, handle, len}, map(handle) -> ptr.
Gate: qemu_test.py shm — shm-client creates a region, writes a pattern, passes
its capability to shm-server, which maps it and reads the same bytes back
(shm: shared 4096 bytes ok). ipc/ipc-call/ipc-cap/supervision/dma/usermem/
display-service and host tests all still pass — the handle change broke no IPC.
Drive the compositor from a separate process, proving the pipeline end to end.
- runtime.display: a Layer handle (fill / blitTile / configure / damage /
destroy), createLayer, and a color(r,g,b) helper that caches the mode and
packs via protocol.pack. Coordinates are signed over the u32 wire fields
(@bitCast both ways), so a layer may sit or move partly off-screen.
- system/services/display-demo: the input-source analog for the compositor — a
full-screen wallpaper, a rectangle it slides back and forth (moved by
configure each frame, so the damage-driven present repaints old + new), and a
cursor. Presents in a loop paced by runtime.time. Wired into build + initrd.
Fix this surfaced: protocol.message_maximum was 4096, but the kernel caps every
IPC message at MESSAGE_MAXIMUM = 256, so replyWait rejected the oversized receive
buffer with -E2BIG and the serve loop had been spinning since D2 (invisibly, as
those gates matched init-time heartbeats). Set it to 256; blit_tile is now
explicitly a small-tile path (larger bitmaps are the deferred shm surface).
Gate: `python3 test/qemu_test.py display-demo` — the demo drives frames of
motion through the layer client API and logs `display-demo: ok`. Regression:
zig build test, display (D1), display-service (D2/D3), and default zig build.
Turn the service into a real compositor. A layer is a server-owned surface (its
own mmap'd cacheable buffer) with a screen position, z-order, and visibility.
Clients create layers, draw into them by command, mark damage, and present; the
compositor repaints only the damaged region — clear to the wallpaper, paint the
visible layers bottom-to-top (z-sorted), flush that rectangle back -> front (WC).
- compositor.zig: the pure, host-tested core — Rect (intersect/unite), Surface,
fillRect, composite (opaque, clipped to a damage rect), blitTile (unaligned-
safe read of a client tile). No syscall/runtime dependency.
- protocol.zig: pack(format, r, g, b) — native pixel encoding for rgbx/bgrx, the
shared colour vocabulary of client and server. Host-tested.
- display.zig: the layer table + create/configure/destroy/fill_rect/blit_tile/
damage/present ops wired onto the compositor, plus a damage-accumulating present.
- Startup self-check: two overlapping layers composited on the real framebuffer,
read back to confirm the overlap shows the top layer and outside shows the
bottom — logs `display: compositor self-check ok`.
Gate: `zig build test` green (compositor + pack), and the display-service case's
self-check passes on hardware. Both new pure modules added to the test loop.
Stand up /system/services/display: a ring-3 process that claims the framebuffer
D1 seeded, maps it write-combining as the front buffer, allocates a cacheable
back buffer, and presents composed frames. The GUI track's compositor, reached
by name over ServiceId.display (= 9).
- protocol.zig: the display wire protocol (info/create_layer/configure_layer/
destroy_layer/fill_rect/blit_tile/damage/present). `info` and a whole-screen
`present` are live; the layer ops fail-stub until D3.
- display.zig: enumerate -> claim -> mmio_map(WC) the LFB, mmap a cacheable back
buffer, clear it and present it (proving the double-buffer path), then serve.
- runtime.display + barrel exports (display, display_protocol): a cached
`.display` client with info()/present(), the runtime.block shape.
- init spawns "display" in boot_services; build.zig wires the protocol onto the
runtime, builds the exe, packs it into the initial-ramdisk, installs it.
mmap fix the back buffer forced: systemMmap was capped at 256 pages (1 MiB) by a
fixed kernel-stack scratch array. Rewrote it to map page-by-page with rollback
(no array) and raised the cap to 8192 pages (32 MiB) — enough for a 4K back
buffer. A real limitation met.
Gate: `python3 test/qemu_test.py display-service` matches the service's own
serial heartbeats (display: online WxH / presented frame 0), printed only after
the full claim -> WC-map -> back-buffer -> present chain. Regression-checked
usermem, heap, init, and D1's display.
Kick off the display service track (docs/display.md, docs/display-plan.md): a
user-space compositor that owns the framebuffer. GOP and the PCI display device
are two views of one controller; GOP dies at ExitBootServices, so the portable
base is the boot-handoff linear framebuffer.
D1 makes that framebuffer reachable from user space over the existing device
claim/mmio_map path rather than a bespoke syscall:
- device-abi: a `display` DeviceClass, a DisplayInfo{w,h,pitch,format} on the
descriptor, and a flags field on resources with a write-combining bit.
- devices-broker: seedDisplay() publishes the loader's framebuffer as a
root-level `display` node (one WC-flagged memory resource); kmain seeds it
after discovery. displayDevice()/displayClaimed() track the claim.
- paging/mmio_map: mapUserDeviceInto gains a write_combining bool — a WC-flagged
resource maps through PAT entry 4 instead of strong-uncacheable (an
uncacheable framebuffer blit is glacial).
- console: falls silent while a display service holds the framebuffer, and is
forced back on by the panic/exception paths.
Gate: the `display` kernel test asserts the seeded node's shape and that the
claim + mmio_map leaf is genuinely write-combining (PAT bit set, PCD/PWT clear).
Regression-checked discovery/ioport/claim-release/supervision/device-list/
device-manager with the +1 device in the table.
Kernel discovery interpreted the whole DSDT/SSDTs (~0.5 MB -> ~9700 nodes) solely to extract the _S5 sleep type for a kernel-side soft-off — ~1-2s of work on the single-core, pre-scheduler critical path, with nothing to overlap it. The ring-3 acpi service already parses the same blobs and owns S5 end-to-end (reads pm1a_cnt from the FADT, writes SLP_TYP itself; orderly-shutdown tests it). So drop the kernel parse entirely.
- all *static*-table parsing stays (MADT/HPET/FADT/MCFG): CPUs, timers, PCIe, and the power register map are still detected from ACPI, not legacy/compat addresses (timer still calibrates via HPET/PM-timer/CPUID, PIT only as last resort)
- kernel keeps reboot (FADT reset register + legacy fallbacks — no AML); soft-off is userspace-only now
- removed PowerInformation.s5/s3, the kernel AML namespace, aml_stats, amlDeviceCount, and the aml import; power.shutdown/enable/sleepS3 gone
- tests: poweroff case retired (S5 covered by orderly-shutdown); discovery drops its S5/AML checks; acpi-parse self-verifies against a device-count floor since there's no kernel count to match
Serial is now a QEMU/dev aid, not a real-hardware necessity: a legacy-free board often has no live COM1, and the boot log is kept in RAM (klog) and flushed to disk. So the serial sink is compiled in only under -Dserial (default false).
- kernel.zig gates serialInit + the log sink on build_options.serial
- boot/efi.zig gates its EFI: progress breadcrumbs (con_out) via progress(); fatal-error messages stay always-on so a failed boot still explains itself
- run-x86-64 boots a serial-enabled image variant (factored addKernel/addBootImage helpers) so a dev boot always captures serial0, without baking serial into the flashable image
- test/qemu_test.py builds -Dserial=true (it asserts on serial markers)
- the loopback probe stays as a real-HW safety net for -Dserial images
Completes Phase 2: the FAT filesystem now stamps and reports a real modification
time, built on the Phase 2d(i) kernel wall-clock. This is the last stat field the
compiler's build cache needs to reason about (source vs cached output).
- on-disk.zig: fatToEpoch / epochToFatDateTime convert between the two 16-bit DOS
date/time fields and Unix epoch seconds (UTC — FAT has no timezone). Host-tested
round-trip + an absolute check (1577836800 == 2020-01-01).
- engine: a settable current_time_epoch that create/write stamp into the entry's
write (and creation) date/time; Node/Listing gained an mtime decoded from those
fields on read. Host test: a create stamps the mtime, read back through resolve
and listEntry.
- vfs protocol FileStatus + runtime.fs.Attributes gained an mtime field; the fat
server sets current_time_epoch from runtime.system.wallClock() per request and
returns mtime from stat. The flat ramfs reports 0 (it has no timestamps).
- fat-test reads the created file's mtime through stat and checks it is a real
current time, behind a new `fat-mtime` QEMU case.
Verified against the host: the guest stamped mtime 1783971676 while the host clock
was 1783971680 (boot+test lag) — the file's mtime is real current time. zig build,
zig build test (the epoch<->DOS conversions + the engine mtime test),
zig build check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations,
fat-rename, fat-mtime, vfs, vfs-client-death, log-flush, orderly-shutdown,
initial-ramdisk, smoke, wall-clock, usb-storage — all green. mode/inode remain.
Adds real (calendar) time, the foundation for filesystem timestamps. Monotonic
time (`clock`) says how long since boot; this says what time it actually is.
- cpu.zig (x86_64): readRtcUnixSeconds() reads the CMOS real-time clock (ports
0x70/0x71) — waits out an update-in-progress, reads twice until stable, handles
BCD-vs-binary and 12-vs-24-hour per status register B — and converts to Unix
epoch seconds (UTC).
- kernel/wall-clock.zig: reads the RTC once at boot and anchors it to the monotonic
clock, so a query is a cheap arithmetic offset — no per-call CMOS poll, no lock,
no SMP hazard on the shared ports. kmain calls init() once the monotonic clock is
final and logs the epoch.
- wall_clock() syscall (33) -> Unix epoch seconds, wrapped by runtime.system
.wallClock(). Wall-clock *seconds* are mechanism the kernel owns like the
monotonic clock; calendars/timezones are user-space policy (the stale comment on
systemClock that called wall-clock a "user-space service" is updated in spirit by
the new handler's doc).
- A `wall-clock` kernel test asserts the boot RTC read is a plausible current epoch.
Verified against the host: the guest read epoch 1783971244 while `date -u +%s` gave
1783971245 (one second of boot lag) — the CMOS read + epoch conversion are correct to
the second. zig build, zig build test, and smoke/clock/init are green.
Completes the Phase 2 FAT mutation set (truncate, mkdir, unlink, rename).
- engine: rename(dir, old_name, new_name) rewrites an existing entry's 8.3 name in
place within the same directory. Refuses a missing source, a non-8.3 target, or a
name that already exists; drops any long-name entries on the old file (it takes
its new 8.3 name), LFN-aware like removeFile. Cross-directory and long-name-
preserving rename are noted limitations. Host-tested (rename keeps contents;
collision, non-8.3, and missing-source are refused).
- vfs protocol: a `rename` operation whose payload is old-path, a 0x00 separator,
then new-path.
- VFS router: a forwardRename helper + a `.rename` case that requires both paths
under the same mount (cross-filesystem rename is refused) and forwards the
mount-relative old+new.
- fat server: a `.rename` handler that requires the same parent directory and calls
engine.rename.
- runtime.fs: rename(old_path, new_path).
- fat-test now renames the file it created (before removing it) and asserts the old
name is gone, behind a new `fat-rename` QEMU case.
Verified: zig build, zig build test (the engine rename unit test), zig build
check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations, fat-rename,
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The engine gained mkdir/unlink in Phase 2a; this exposes them as first-class
filesystem operations so programs can use them.
- vfs protocol: two new path-based operations, mkdir and unlink (appended, so
existing opcodes/offsets are unchanged).
- VFS router: a forwardPath helper relays a path-based op under a mount to its
backend; the mkdir/unlink cases forward to the mounted filesystem (the flat
ramfs refuses them — it has no directories).
- fat server: mkdir -> engine.createDirectory, unlink -> engine.removeFile, each
resolving the parent via a shared splitParent helper (also used by open-create).
- runtime.fs: makeDirectory(path) and remove(path).
- fat-test now exercises the whole path — mkdir /mnt/usb/TESTDIR, create + write +
read a file inside it, then remove it — behind a new `fat-mutations` QEMU case.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — fat-mount, fat-mutations (mkdir/write/read/unlink through the mount),
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
On a headless or real board nothing captures serial, so the boot log — the whole
diagnostic stream — is lost at power-off. This retains it in the kernel and copies
it to the boot USB volume as /mnt/usb/DANOS.LOG, the on-disk equivalent of QEMU's
`-serial file:`. Pull the stick, read DANOS.LOG on another machine.
How it fits together:
- Kernel RAM sink (log.zig): a fixed 256 KiB in-image buffer registered as a log
sink in kmain, right after serial. Because userspace debug_write funnels through
log.write, it captures the entire stream — kernel lines and every service's
output — from the first line. Fills linearly and stops when full (earliest boot
output, the most valuable, is kept); no allocation, so it is panic-safe.
- klog_read syscall (32): copies that buffer out to a user buffer, the mirror of
debug_write — same overflow-safe user-half bounds check, kernel -> user copy,
under the kernel lock so the snapshot can't grow mid-copy. Wrapped by
runtime.system.klogRead.
- log-flush (new one-shot, in the initial-ramdisk): waits for the fat server to
mount /mnt/usb, then copies the whole log to /mnt/usb/DANOS.LOG. init spawns it
once the boot services are up (fire-and-forget; it polls the mount itself). If
no volume is mounted — no stick, or the no-VFS ramdisk sweep — it exits silently.
- init shutdown flush: init repeats the copy inline at the top of shutDown(),
BEFORE it tears down the storage services (the fat server is stopped first), so
a clean poweroff captures the fullest log while /mnt/usb is still writable.
- unistd.writeAll: loops write() past the 224-byte VFS payload cap; both flush
paths use it.
The filename is 8.3 (DANOS.LOG) at the mount root — the FAT short-name rule, and
there is no mkdir on the FAT path yet. Extend-only writes mean the two same-session
flushes never leave stale bytes (the shutdown log is a superset of the boot log);
a shorter log on a later boot of the same stick can leave a stale tail — a noted,
cosmetic limitation, not worth pulling O_TRUNC into the FAT write path for now.
Verified end to end under QEMU: a new `log-flush` case (reusing the orderly-shutdown
build) asserts both markers then S5, and DANOS.LOG is read back out of the image
afterwards (11804 bytes, containing the kernel init line, the FAT mount line, and
the boot flush marker). Regression stays green: zig build, zig build test, zig
build check-fat-image, and a sequential QEMU sweep — smoke, init, initial-ramdisk
(log-flush silent in the bare sweep), orderly-shutdown, fat-mount, usb-storage,
usb-hid, vfs, input, device-manager, process, signals, dma, fault-pf.
The system now boots off a real FAT32 filesystem on a USB mass-storage device
instead of QEMU's synthesized VVFAT drive. A new in-repo image builder formats
that filesystem from the FHS boot tree, and both QEMU call sites (the run step
and the test harness) attach it as a usb-storage device on the xHCI bus, so
every boot exercises the full USB path OVMF -> BOOTX64.efi -> kernel.
- tools/make-fat-image.py: a Python 3 stdlib-only FAT32 formatter (mirrors
tools/make-initial-ramdisk.py — no external host dependencies). It lays down
the boot sector + BPB/EBPB32, FSInfo, backup boot sector, two FATs, and the
root/subdir/file cluster chains, emitting long-name entries where a name is
not 8.3. Packs the four boot inputs (EFI/BOOT/BOOTX64.efi, system/kernel,
system/services/init, boot/initial-ramdisk.img) into their boot paths. A
--verify subcommand re-checks the 0xAA55 signature, recomputes the cluster
count -> FAT32, and resolves EFI/BOOT/BOOTX64.efi, all with no dependencies.
- build.zig: a mk_fat step builds zig-out/danos-usb.img from the four boot
artifacts (so changing -Dtest-case rebuilds the image with that kernel), a
check-fat-image step runs --verify, and run-x86-64 boots the image on a
usb-storage device (if=none,id=bootusb + usb-storage,bus=xhci.0,bootindex=0),
keeping usb-kbd/usb-mouse on the same controller.
- test/qemu_test.py: the default boot config now boots off danos-usb.img on a
usb-storage device (xHCI + usb-kbd + usb-mouse + the boot stick). The seven
per-case qemu_extra blocks that added their own qemu-xhci/usb-kbd/usb-mouse
(or a VVFAT stick) collided on id=xhci and are removed — the default provides
the bus and the boot device. usb-storage and fat-mount now exercise the real
FAT32 boot image (usb-storage reads its 0x55AA boot sector; fat mounts it at
/mnt/usb). A build_case override lets a case reuse another's kernel, used by a
new usb-boot case: an explicit, named boot-from-USB regression guard.
Verified: zig build, zig build test, and zig build check-fat-image are green
(FAT32, 128992 clusters, BOOTX64.efi present); a broad sequential QEMU sweep
passes — smoke, init, vfs, input, device-manager, usb-report, usb-hid,
usb-storage, fat-mount, device-list, driver-restart, acpi-report, iommu,
orderly-shutdown, usb-boot, dma, msi, initial-ramdisk, args, process — proving
the boot switch holds across kernel tests, the full init tree, the USB stack,
the FAT mount, and orderly shutdown.
Add a FAT12/16/32 filesystem the VFS mounts at /mnt/usb, reading and writing a
USB stick through the block device. Verified end to end under QEMU: the fat
server mounts the volume, the VFS routes /mnt/usb to it, and a client lists the
root and reads a file (the ELF magic of /mnt/usb/system/kernel).
- engine.zig: the FAT engine over a BlockDevice interface — mount (a bare FAT or,
as QEMU's VVFAT and most real sticks present it, an MBR-partitioned disk), FAT
chain walk (12/16/32), cluster allocation, directory traversal with long-name
read, and file read / write / create. Host-tested against a RAM-backed FAT16
image (create, cluster-spanning write, mid-file overwrite, read-back, list).
- on-disk.zig: the align(1) boot-sector / directory / long-name / FSInfo structs
and the cluster-count FAT-type detection.
- fat.zig: the server — wraps the .block device (a DMA bounce buffer) in a
BlockDevice, mounts the FAT, serves the vfs-protocol as a backend, and mounts
itself into the VFS at /mnt/usb. Spawned by init as a boot service.
- runtime.block: the block-device client (geometry / read / write by physical
address, so whole sectors never cross IPC).
- Raise the kernel service-name registry (maximum_services) 8 -> 16: it is
indexed directly by ServiceId, and fat = 8 was being rejected, so the fat
server exited before registering.
- VFS: an absolute path with no matching mount is now not-found rather than
silently created in the flat ramfs — so /mnt/usb fails cleanly until mounted.
Tests: fat-mount (the full stack: block -> FAT -> VFS mount -> list + file read)
passes; host units cover the engine and on-disk structs; the vfs, shutdown, and
USB regression suite stays green (10/10).
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The capstone. init becomes a real supervisor: it spawns its boot
services supervised against one endpoint that also carries its signals, a
re-arming heartbeat timer, and the power events it subscribes to. On the
power button (or a terminate signal — same path) it logs the shutdown,
runs the M17 stop sequence over its children in reverse spawn order
(vfs last), then asks the power service for S5.
The acpi service honors a shutdown request from a power subscriber — init
is the one subscriber, a soft gate that stands in for 'only the system
supervisor may power off' and, unlike a PID-1 check, survives the test
harness where the kernel's idle tasks take the early ids. The power
service is mechanism (write S5); deciding when to shut down and stopping
everything else first is init's policy — the microkernel split applied to
poweroff.
The orderly-shutdown scenario injects a real QMP power-button event and
watches the whole chain compose: button pressed -> init shutting down ->
entering S5 -> QEMU powers off. That single scenario proves the M17
lifecycle and the M21 event side compose into a clean shutdown. Suite
60/60.
The kernel publishes the FADT as one more acpi-tables memory resource
(tagged by its intact FACP header — the AML blobs are header-stripped);
the acpi service reads the PM1 event/control and GPE register ports from
that copy, so the kernel's own FADT parse is untouched. A power-protocol
module (ServiceId.power = 5, domain-named so an ARM PSCI service can serve
the same id) carries subscribe / shutdown / events.
The acpi service converts to runtime.service.run — device discovery, the
.power protocol, and the SCI notification all fold into one loop. At
startup it enables ACPI mode if SCI_EN is clear (the SMI dance), binds the
SCI (found as the node's len-1 irq resource, distinct from the broad
window), and sets PWRBTN_EN. On the SCI it reads PM1_STS, clears
PWRBTN_STS write-1, logs the press, publishes power_button to
subscribers, and always acks. The power-button scenario proves it with a
real QMP system_powerdown injected mid-run through the M21.0 channel.
Every case now gets a -qmp unix socket (additive; no case notices). A
minimal client does the capabilities handshake and executes one command;
the per-case qmp_after hook sends it N seconds after boot, retrying until
the guest's socket is up. A case with a hook configured cannot pass until
the hook delivered — and the smoke case now carries a harmless
query-status hook, so the channel is proven end to end on every run.
This is how the power scenarios inject the real ACPI power-button event
(system_powerdown) in M21.1 and M21.3.
The FHS-shaped zig-out IS the boot volume (docs/efi.md), and `zig build
run-x86-64` already presents it to the guest with fat:rw:zig-out. The test
harness instead assembled a separate ESP by copying the boot-critical files
out of zig-out into zig-out/qemu-test/esp — but every (dest, src) pair was
identical, so the copy was pure redundancy.
Drop make_esp and point QEMU straight at zig-out, matching run-x86-64 and the
docs. Removes the now-dead efi_app/kernel/extra arch-config entries.
The kernel no longer folds AML Device objects into the device tree — the
ring-3 acpi service is the sole builder of _HID device nodes. The kernel
keeps building the namespace only for the \_S5 sleep type, and still
seeds the static tables (MADT, HPET, MCFG, FADT) and the acpi-tables node.
The device manager matches ps2-bus from the service's _HID reports
(PNP0303 / PNP0F13, singleton-deduped) instead of boot-snapshot nodes;
its dead boot-snapshot ps2 arm is gone. The service registers every
device before reporting any, so a driver the manager spawns on the first
report already sees the full set — no keyboard-before-mouse race. The
acpi-ps2 scenario proves the whole chain: report -> spawn -> ps2-bus
finds the controller and attaches its keyboard, entirely in ring 3. The
ioport test moved to the acpi-tables I/O window, since the kernel-built
PS/2 node it used to scan for no longer exists. The retired
device-building functions in acpi.zig are dead but retained (a botched
mechanical deletion is worse mid-migration than a follow-up sweep, which
is flagged as a task). Suite 58/58.
AML method evaluation now runs in userspace touching real hardware: the
service builds an interpreter with a ring-3 Hal (port I/O routed through
its claimed acpi-tables node; a scratch page backs SystemMemory maps so a
stray OperationRegion degrades to zeros instead of faulting a process
that cannot map arbitrary physical memory). It walks the namespace and,
for each present _HID device that is not a PCI root, evaluates _CRS,
registers it under acpi-tables, and reports it with its EISA-decoded hid.
Containment for this needed the broker's irq check to become range-based
— an interrupt line is still indivisible, but a parent may own a range,
so the acpi-tables node's broad irq window contains its children's legacy
lines (a length-1 range is exactly the old equality, so single-irq
parents are unaffected). ChildAdded gained a hid field for firmware
string identity. Matching those reports to drivers stays off until M20.3,
so ps2-bus still comes up via the kernel path — no regression. The
acpi-report scenario proves the PS/2 keyboard (io 0x60/0x64 + IRQ) and
mouse (IRQ) are reported with their resources. Suite 57/57.
The AML module becomes a build module compiled into both the kernel (for
the \_S5 sleep state it still needs) and the new acpi service — one
source, two builds, no fork. The kernel publishes a single acpi-tables
node: the DSDT/SSDT blobs as memory resources, a broad io_port grant (the
honest trust boundary — firmware AML names whatever ports it chose, known
only after parsing), and the SCI for the M21 event track. The acpi
service claims the node, maps each blob through the ordinary mmio grant
(which preserves the sub-page offset onto the bytecode), and runs the
same parser the kernel does. It self-verifies its namespace Device count
against the kernel's — 34 = 34 — deterministically via an argv the
acpi-parse test passes, so no racing the shared serial buffer. Parse-only
touches no hardware; OperationRegion evaluation waits for _CRS/_STA in
M20.2. The manager spawns 'discovery' (the neutral ramdisk name) at
startup. Suite 56/56.
Each function is registered under the bridge with the config-space slice
and BARs sized by the same all-ones probe the kernel uses — byte-for-byte
equal descriptors, so the idempotent register returns the kernel's
existing node ids during coexistence instead of duplicating the tree.
The bridge gained the 16-bit io_port aperture that functions' I/O BARs
need to pass containment. Reports carry the registered device_id, and
the pci-scan scenario drills a forced restart: kill the enumerator after
its reports, watch the respawn re-scan, and assert the broker's PCI node
count never grew. The usb-restart test trigger is pinned to the xHCI
reporter (pci-bus racing it to two reports used to steal the kill).
Harness hardening: failing cases preserve their serial logs; the heavy
scenarios run at 150s.
The manager matches the pci_host_bridge node and spawns pci-bus with the
bridge id as its assignment — hello, supervision, restart, all the M18
contract for free. The driver claims the bridge, maps the ECAM window
(resource 0) through the ordinary mmio grant, and repeats the kernel's
brute-force bus/device/function walk from user space. The pci-scan
scenario builds its expected marker from the kernel's own function count,
so the two enumerations must agree exactly — the equivalence that
licenses retiring the kernel walk in M19.3.
Applications ask the device manager for the tree (enumerate: a header
plus ChildEntry records) and subscribe to published add/remove events by
handing their endpoint over as the call's capability — the input-service
pattern; events are the same ChildAdded/ChildRemoved structs the bus
drivers send, one encoding in both directions. device-list is the first
client: it prints the tree, subscribes, and narrates the events through
a driver restart. The protocol's message maximum is capped at the
kernel's IPC MESSAGE_MAXIMUM (256 bytes, ten entries per reply; paging
joins the protocol when a tree outgrows one message). The startUserTask
debug print is gone: it wrote to serial unserialized against user-space
lines and sheared concurrent log markers in half — the root cause of the
scenario flakes.
child_added/child_removed join the device-manager protocol. The driver
maps its register BAR (resource 0 is the ECAM config space; the walk
starts at 1), reads CAPLENGTH and HCSPARAMS1, and reads one PORTSC per
port: the connect bit and speed class come straight from hardware, no
rings needed to see the devices. The manager mirrors reported children
keyed by (parent, port), remembers which instance reported each, and
prunes a dead reporter's children before deciding the restart — the
children describe protocol state that died with the process. The
usb-report scenario drives the whole loop: two QEMU devices reported,
reporter killed, children pruned, driver respawned with backoff, and the
new instance re-claims, re-scans, and re-reports.
The manager is now a harness service on the well-known .device_manager
endpoint. Every driver spawns supervised; drivers with an assignment must
hello (device-manager-protocol, versioned) within a deadline enforced by
a timer sweep. Exit reasons drive the restart decision: clean exits stay
down, faults restart with 300/600/1200ms backoff, and three fast deaths
mark a driver failed instead of respawning forever. usb-xhci-bus is the
first conforming driver; the crash-test fixture claims a device, hellos,
and faults on purpose — each respawn re-proving claim release on death
through the manager's own path. maximum_tasks grows 16 -> 32: the
initial-ramdisk sweep (15 binaries at once) was intermittently
overflowing the static pool.
Signals are statements delivered as coalescing notifications to the
endpoint a process nominates with signal_bind — never a hijacked stack,
never a question (liveness is the zero-length ping the harness answers).
process_signal is supervisor-or-self gated, like kill; unbound targets
accumulate a pending mask delivered on bind. timer_bind is the missing
timed wait: a one-shot deadline landing in the same replyWait as
everything else — what stop(), hello deadlines, and restart backoff are
built from. runtime.service.run folds requests, signals, and
notifications into callbacks; the VFS conversion deletes its hand-rolled
loop and gains the whole lifecycle contract. The signals scenario drives
ping, reload, terminate->exited, the timer, and the deaf-child
deadline->killed path from ring 3. docs/process-lifecycle.md increments
1-4 are now as-built.
process_subscribe adds an endpoint to a bounded, ref-counted subscriber
table; every death posts the same badge encoding a supervisor's exit
notification uses, equally late, so subscribers observe a fully-released
child. A dying subscriber's own subscriptions are removed first — it never
hears about itself. The VFS is the first subscriber: open handles now
record their owner and are swept when the owner dies, because a service
must never depend on clients cleaning up after themselves
(docs/process-lifecycle.md). Proven by the vfs-client-death scenario.
Every path out of a process (exit, fault, kill) now releases its device
claims alongside its IRQ and MSI bindings, so a restarted driver can claim
its hardware again — the cleanup half of process-lifecycle.md's iron rule 1.
MSI vectors were already swept by irq.releaseOwner; claims were the gap.
The claim-release test proves kill -> release -> re-claim, plus the broker
release in isolation.
Programs can now subscribe to keyboard events (key_down/key_up/key_press)
and drivers can broadcast them, through a new user-space input service.
The delivery model is forced by danos IPC: a synchronous rendezvous holds
one pending reply, so a server cannot park N subscribers blocked in a
"wait for next event" call — delivery must be push. But a synchronous push
has no timeout and the kernel never wakes a sender parked on a dead peer's
endpoint, so one dying subscriber would hang all input. So this lands the
roadmap's planned asynchronous buffered send and builds the service on it:
- ipc_send (syscall 26): non-blocking post to an endpoint's bounded payload
ring, delivered through reply_wait as a buffered message (notify_message_bit).
A full ring drops the oldest. It can never hang on a dead/slow peer.
- input-protocol + runtime.input helpers (subscribe/next, connectSource/
publish) — the first real consumer of M13 capability passing: a subscriber
hands the service its own endpoint as a capability.
- input service (fan-out via ipc_send, dead-subscriber pruning), a synthetic
input-source, and input-test; the ps2-bus keyboard driver publishes to it.
Real IRQ1 scancode decoding (which must live in the bus, the PNP0303 owner)
is a documented follow-up; the source is synthetic for now.
- build/init wiring, an `input` QEMU case, and docs/input.md.
Full QEMU suite 48/48, including the new input case and every IPC/endpoint
regression (ipc, ipc-call, ipc-cap, vfs, hpet, bus, irqfree).
process_enumerate snapshots the task table (the device_enumerate shape, so
ps is a user program); system_spawn returns the child id, records the caller
as supervisor, and takes an exit endpoint; process_kill is allowed only for
the supervisor. Every death — exit, fault, or kill — posts a child-exit badge
to that endpoint (the IRQ-as-IPC pattern as SIGCHLD). A target caught off-CPU
is reaped in place; a running one is condemned and finished at its next
system call or tick, guarded so teardown never lands mid-kernel-operation.
Tested by process-list, process-kill, and supervision (a ring-3 supervisor
exercising the whole surface); design notes in docs/process-management.md.
Processes now start with C-compatible arguments: the kernel builds the
System V AMD64 entry block (argc, argv, empty envp, auxiliary vector)
at the top of the stack, argv[0] is the path or initial-ramdisk name
the process was spawned as, and system_spawn carries an optional
NUL-separated blob that becomes argv[1..]. The runtime parses the block
(runtime.argumentCount/argument) and its spawn wrappers pass arguments
through. The name is also recorded on the task, so a fault report says
which binary died, not just its id.
The user stack grows from one page to eight (32 KiB,
parameters.user_stack_pages), with the page below left unmapped as a
guard so an overflow faults into a clean process kill rather than
corrupting the image. Task.name_buffer is zero-initialised, not
undefined: an undefined default is materialised as a 0xAA fill that
moved the static task pool out of .bss and made the whole kernel ~7x
slower under QEMU TCG (caught by the affinity test).
Proven end to end by the new args test: args-echo respawns itself with
arguments via the syscall blob, burns more stack than one page could
hold, and echoes its argv intact. Full suite: 44/44.
A CPU exception raised in ring 3 by a scheduled process now kills that
process - IRQ bindings, IPC handles, and address space reclaimed, a
client it owed a reply to failed with the new -EPEER instead of hung -
and the core reschedules (docs/resilience.md step 2). Kernel-mode
faults, NMI, double fault, and machine check stay terminal, as does the
borrowed-thread isolation probe. Proven by the new fault-recovery QEMU
test: init keeps heartbeating after a process page-faults to death.
Ring 3 still has no direct in/out (no TSS I/O bitmap, IOPL never raised — a #GP), but a
driver no longer needs it: io_read(device_id, resource_index, offset, width) and
io_write(..., value) grant port access the same way mmio_map grants memory. The claim
plus the device's discovered io_port resource are the capability — resolveIoPort checks
the device is claimed by the caller, the resource is io_port, and [offset, offset+width)
stays inside it, then issues the in/out via architecture.pioRead/pioWrite. So a PS/2 or
16550 driver is now writable; the low-rate legacy hardware that needs port I/O is fine
with a syscall per access. io_port resources were recorded by discovery and ignored —
now they're used. Runtime: device.ioRead/ioWrite.
New `ioport` test claims QEMU's PS/2 controller (io_port 0x64, discovered via ACPI) and
checks the gate admits an in-range access, refuses over-wide / out-of-range / unclaimed,
and that the kernel actually reads the status port (0x1c). Suite 41/41 plus host tests.
Docs refreshed for the whole M13-M16 + port-I/O reality: drivers.md "Limits" no longer
lists port I/O, DMA memory, or barriers as missing (they exist) and its "what's next"
reflects that; the FSH doc's character-device and block-device sections are corrected
("cannot host a block driver at all" is no longer true — writable now, not yet memory-
safe pending IOMMU enforcement); device-interrupts.md unblocks the keyboard and narrows
the interrupt gap to MSI-X.
Detect the IOMMU: discovery now parses the ACPI DMAR table, finds the first VT-d
DMA-remapping unit (DRHD), maps its register block, and records its version and
capabilities (iommu_present/base/version/capabilities in the platform info). On QEMU's
emulated intel-iommu this reads back a real unit (base 0xfed90000, version 1.0).
This is detection only, and deliberately so. A full VT-d bring-up — per-device
translation domains that confine a driver's DMA to the buffers it dma_alloc'd — is the
real device-side safety guarantee, but it cannot be verified without a DMA-capable
device driver (none exist yet) and QEMU's intel-iommu to fault against. Writing that
enforcement now would be a large body of unverifiable page-table code; it belongs with
the first DMA driver, which is both the natural order and the only way to test it. Until
then the caveat stands in full: device_claim on a DMA-capable device is still equivalent
to granting ring 0. The docs say so plainly.
New `iommu` test (harness boots it with -device intel-iommu via a new per-case qemu_extra
hook) confirms the DMAR is parsed and the unit's registers read. Suite 40/40 plus host
tests.
Two parts, both blockers for real PCI drivers.
ECAM config space per function: enumeratePci now gives every pci_device its own 4 KiB
configuration window as resource 0. A claimed PCI driver mmio_maps that to reach its
command register, BARs, and — the point — its capability list (MSI/MSI-X, PCIe extended
caps), with no new syscall. Verified in the discovery test (QEMU q35's functions each
carry it).
MSI: msi_bind(device_id, endpoint) -> address (rax), data (rdx) allocates a per-device
edge-triggered vector, binds it to the endpoint, and returns the (address, data) the
driver programs into its own MSI capability. Unlike irq_bind there's no GSI, no I/O APIC
entry, no sharing, and no ack cycle — dispatch recognises an MSI vector (vector_gsi ==
none, msi_bound set), EOIs, and notifies. Owner-keyed release drops the binding on exit.
Legacy INTx (_PRT parsing + shared lines) is deliberately skipped; MSI is the real
answer.
QEMU's HPET has no MSI, so the new `msi` test proves the vector-routing path with a
self-IPI (new apic.selfIpi) standing in for the device's MSI write: bind a vector,
fire it, the bound endpoint is notified. The msi_bind syscall wraps irq.msiBind with
the claim check and lands its first real use with the first PCI driver. Suite 39/39
plus host tests.
Daniel Samson
Daniel Samson