The logs read 'class 9/0/0' where they could say 'Hub'. usb-ids gains
className (a device/interface class byte -> 'Hub', 'HID', 'Mass Storage',
...) and interfaceName (a HID boot interface -> 'HID boot keyboard' /
'HID boot mouse'), both host-tested with usb-ids. The bus driver's
enumerate + register lines now read, e.g.:
port 21 device: Hub vendor 0x05e3 product 0x0626, 1 interface(s)
port 21 interface 0: Hub (9/0/0) registered as device 47
port 5 interface 0: HID boot keyboard (3/1/1) registered as device 32
so a real-hardware log is scannable by eye. Full USB case set green
(hub regexes follow the new 'device: <name>' format).
Real-hardware root-cause: the user's keyboard works in the firmware boot
menu but dies under danos. The port dump shows why — danos scans the
root ports ~3 ms after the controller reset, but a USB2 connection needs
~100 ms to debounce, so the boot scan sees the USB2 companion hub's port
empty (all USB2 ports ccs=0), while the SuperSpeed devices (hub, storage)
train instantly and DO show up. danos then relied on a Port Status
Change EVENT to catch the late USB2 connection, which does not fire
reliably on this hardware.
The tick now polls every root port and reconciles on the empty->connected
EDGE (previous-state tracked per port, seeded from the boot scan so
already-up ports never re-fire), bringing up a device that appears after
the scan without depending on the event. Edge-triggered so a port that
fails to enumerate is not retried every 8 ms. Branch-only until the
keyboard is confirmed on real hardware; the diagnostic dumps stay for
the next boot.
The USB2 companion hub carrying the user's full-speed keyboard never
appears — only the SuperSpeed hub (port 19) and SS storage (port 21)
connect. To find where the USB2 root ports are and whether the companion
is presenting on one, walk the xECP Supported Protocol capabilities
(logging each USB 2.0 / 3.0 root-port range) and dump every port's raw
PORTSC unconditionally (ccs/ped/pls/pp/speed). QEMU confirms the dump
(USB2 ports 5-8, USB3 ports 1-4). Branch-only diagnostic.
Branch-only debugging for the real SuperSpeed compound hub: the spin fix
(27f87cb) stopped the hang — the SS hub's 4 SuperSpeed ports now enumerate
(all empty, correct: the full-speed keyboard isn't a SuperSpeed device) —
but the USB2 COMPANION hub, where the keyboard actually lives, never
appears. Only root ports 19 (SS hub) and 21 (SS storage) connect.
Dump every root port's raw PORTSC at scan (connect/enable/link-state/
speed) and log every root port-change event, so the next boot shows
whether the companion is connected on a USB2 port we misread, connects
late as a port-change event, or is simply absent. Diagnostic logging —
to be removed once the companion path works.
Real-hardware finding: a SuperSpeed hub (the user's Genesys, 4 SS
downstream ports) HUNG the bus driver at boot — it stopped logging with
no fault, and the hub's port power dropped. Cause: a SuperSpeed hub has
change bits a USB2 hub lacks (link-state, BH-reset), and the B4 servicing
— written and tested against QEMU's USB2 hub — never cleared them, so
the hub's status-change endpoint re-reported the same port forever and
the driver spun servicing it, never reaching the USB2 companion hub
where the full-speed keyboard actually lives.
hubPortStatusAck now clears the SuperSpeed-only change features too
(gated on hub speed; a USB2 hub is unaffected), and the tick services a
bounded batch of hub changes (32) before yielding — so even if a hub's
change bits misbehave, the driver cannot spin the machine. A per-port
status log line surfaces exactly what a hub reports, so the next real
boot shows the SS hub's port states and whether the USB2 companion
enumerates. QEMU usb-hub cases still green (the SS clears are gated off
for QEMU's USB2 hub).
There was no way to confirm a keyboard actually registers keys on real
hardware (enumeration binding the driver only proves the device came
up). The keyboard driver now echoes each decoded printable character
(and newline) to its log: type a known phrase and read it back from
usb-hid-keyboard.log, or watch it appear live on screen in a -Ddiagnose
boot (where the kernel console is a log sink). It exercises the whole
path — HID report -> diff -> layout -> character — not just enumeration,
and works identically for a keyboard behind a hub.
A usb-key-echo QEMU case injects a phrase via QMP send-key and asserts
it echoes (stable across repeated runs). Full suite 92/92.
Completes hub support (docs/usb-hub.md). On the bus tick, a downstream
hub-port change now dispatches: a connect enumerates the new device
(B4b), a disconnect tears the old one down — recursively, since a hub
that leaves takes its whole subtree with it (children first), reporting
each interface ChildRemoved and Disable-Slotting the device. Route
strings compose across tiers, so a device two hubs deep enumerates with
a two-tier route.
QEMU's hub — unlike root-port hot-plug — DOES raise downstream
status-change events, so both paths are harness-tested: usb-hub (a
keyboard behind a hub binds usb-hid-keyboard), usb-hub-nested (a
keyboard two hubs deep), usb-hub-unplug (device_del behind the hub tears
it down). Full suite 91/91.
Real-hardware validation of the user's SuperSpeed Genesys hub with
full-speed devices on its USB2 companion is flagged for the user (QEMU's
USB2 hub does not model the compound USB3 hub).
The core of hub support (docs/usb-hub.md): a device on a hub's
downstream port now reaches its class driver exactly like one on a root
port. The hub's interrupt status-change endpoint is armed with an
in-process subscription — completions set the hub's pending-port mask
instead of queuing a class-driver report — and setupHub seeds every
downstream port pending so a STATIC topology (a device present at
power-on) enumerates without waiting on the initial interrupt edge.
On the bus tick, each pending hub port is serviced: GET_STATUS + clear
the change bits, and on a connect reset the port, read the speed, then
enable a slot and Address Device with the composed route string
((parent_route<<4)|port), the inherited root port, and the parent hub's
slot/port as the TRANSACTION TRANSLATOR — so the controller routes a
full/low-speed device's split transactions through the hub's TT. The
device then enumerates and registers its interfaces through the normal
path (a compact topology-unique port key keeps the id tag within its
8-byte cap), recursing setupHub if it is itself a hub.
Verified in QEMU (a keyboard behind a USB2 hub on a second controller):
'hub slot 1 port 1 device vendor 0x0627 ... usb-hid-keyboard: ok
(device 35)'. Full suite 89/89. The user's SuperSpeed Genesys hub +
full-speed keyboard/mouse on its USB2 companion is the real-hardware
target, flagged separately.
First slice of hub support (docs/usb-hub.md), handled IN the xhci-bus
because a device behind a hub is reached by the CONTROLLER via a route
string in its slot context — topology only exists inside the driver
that owns the controller. When the scan enumerates a class-9 device it
now calls setupHub: read the hub descriptor for the downstream port
count and TT arrangement, tell the controller the slot is a hub
(Configure Endpoint with the slot add-flag sets the Hub bit, Number of
Ports, and MTT/TT-Think-Time per xHCI 4.6.6), SET_HUB_DEPTH for a
SuperSpeed hub so it can compose route strings, and SET_FEATURE
PORT_POWER every downstream port.
The Device gains topology fields (route string, root port, parent hub
slot/port for the TT) and buildAddressInputContext now fills them, so
the Address Device path is ready for downstream devices — those are
enumerated in B4b. A root-port device gets route 0 and its own port as
the chain root, unchanged behavior.
Verified in QEMU with a hub on a second controller and a device behind
it (a usb-hub QEMU case, since the boot controller's auto-assigned
devices collide on the low ports): 'hub slot 1: 8 downstream ports
powered (USB2 single-TT)'. Full suite 89/89. The user's SuperSpeed
Genesys hub is the real-hardware target, flagged separately (QEMU's
USB2 hub doesn't model the compound USB3 hub).
Regression from the B3 MPS0 work, caught on real hardware: a SuperSpeed
hub (and the SuperSpeed boot stick) failed to enumerate. bMaxPacketSize0
(device descriptor byte 7) is a LITERAL size for USB 2.0 and below
(8/16/32/64) but an EXPONENT for SuperSpeed (9 = 2^9 = 512). The refresh
read the exponent 9 as a size and issued Evaluate Context to set EP0 to
9 bytes, corrupting the control endpoint so every following transfer
failed. SuperSpeed's EP0 is fixed at 512 and needs no correction, so
the refresh is now skipped for speed >= 4; only full/low/high speed,
where the field is a literal that can differ from the speed default,
still run it. QEMU tolerated the wrong MPS0 — real silicon does not
(the class of bug the harness can't reach, flagged real-HW-pending).
This likely also explains intermittent no-storage/no-logs on a normal
boot: the boot stick is SuperSpeed and hit the same corruption. Full
suite green (orderly-shutdown's lone failure was its known QMP-timing
flake — three clean re-runs).
B3 — the runtime lifecycle a hot-pluggable bus needs, plus two init
fixes that runtime device arrival depends on:
- pump() now handles PORT STATUS CHANGE events (silently dropped
before): it queues the port, and the bus driver brings the port up
(a device arrived) or tears it down (a device left) on its tick —
reporting each interface ChildRemoved to the device manager, which
prunes the node, notifies watchers, and lets the class driver's world
end honestly, then Disable Slot frees the controller-side state.
- ALL root-hub ports are powered at init, not just those with a
boot-time device: an unpowered port (PP=0) cannot signal a later
connect, so a hot-plug would never be seen.
- the interrupter is enabled (IMAN.IE + USBCMD.INTE) while the ring
stays polled — some controllers only WRITE runtime events to the
ring when the interrupter is enabled.
Real-hardware validation is flagged for the user: QEMU's qemu-xhci does
not raise a runtime port-change event to a polling driver on device_add,
so the end-to-end hot-plug path can't be exercised in the harness (the
port-change handling itself IS proven — a late boot device's PSCE is
caught and acked). The harness gained qmp_sequence (multi-step QMP
injection with arguments) for when a drivable case exists. Full suite
88/88; the working USB path (enumeration, HID, storage) is unregressed
by the port-power and interrupter changes.
The guest mutates its boot volume (fat tests create files, the logger
writes /var/log) and QEMU is hard-killed after a match, so booting the
build artifact in place let one run's leftovers fail the next — a stale
TESTDIR tripping the mkdir-duplicate refusal was the lone 87/88 failure
in an otherwise green suite — and dirtied the build cache's own output.
Each case now boots a fresh copy in the work directory.
Two real-hardware correctness fixes from the M20 list, both invisible
to QEMU's forgiving controller:
refreshMaxPacketSize0 existed only as a comment. The EP0 context kept
the SPEED-DEFAULT max packet size (full-speed: 8) even when the device
declares 16/32/64 — real controllers fault the very first full
descriptor read on the mismatch, which is the standing suspect for
full-speed mice dying on the user's PC. Enumeration now probes the
device descriptor's first 8 bytes (deliverable at any legal MPS0),
and issues Evaluate Context to correct EP0 before any longer transfer,
naming the failure and codes if the controller refuses.
And a USB2 port's PORTSC speed field is only meaningful once the port
reset ENABLES the port: the speed (and the MPS0 default derived from
it) is now sampled after the reset instead of trusting the connect-time
read.
B2 — the 1-in-3 boot-time READ CAPACITY failure, root-caused: the xHCI
library's awaitTransfer claimed ANY unclaimed transfer event as its own
completion. An interrupt-endpoint event whose TRB pointer no longer
matched the armed subscription (an error or stale completion from the
keyboard/mouse polling concurrently with storage bring-up) fell through
and was misread as the bulk transfer's completion — desynchronizing the
mass-storage bulk protocol in controller state that SURVIVED driver
restarts, so every retry failed too. Awaited transfers now match the
event's slot id and endpoint DCI; foreign events are dropped and named.
Twelve consecutive runs of the previously-flaky cases pass; the full
suite is green with none of its old intermittents.
B1 — and when storage does fail transiently, the system now heals
instead of giving up forever: a nonzero exit maps to ExitReason.aborted
(a deliberate FAILURE exit — supervisors restart those with backoff,
unlike a clean .exited), usb-storage exits nonzero when a PRESENT
device fails bring-up, and the fat service no longer blocks its harness
polling for a block device and then dies — it serves immediately
(requests fail politely), retries on a 500 ms timer, and mounts
whenever storage appears, including after a driver restart.
(An earlier append landed on a line missing its newline, mangling
'.github/' and silently un-ignoring var/ — which let a stray add sweep
pulled logs into the tree. Repaired, and the logs untracked again.)
Its only content was the redundant announce line — the useful shutdown
marker was written AFTER the final drain, so it reached serial and the
ring but never a file, and a truncated boot could only be inferred from
what was missing. The marker now enters the ring BEFORE the drain, so
the drain carries it into logger.log: a directory whose logger.log ends
with 'shutting down; final flush' is complete through shutdown; one
without it was cut early. The sequence-count epilogue stays serial-only,
after the drain, by design.
First real per-process logs off the stick (the logging track paying for
itself): kernel.log showed 16-core bring-up costing 47 s — per-core gaps
of 2-21 s — on a machine whose clocksource is the TSC, so every AP runs
the pairwise warp check. QEMU always picks HPET, so the harness never
executed this path at all.
The check was bounded by ITERATIONS: 1<<20 warp ticks, each a locked
read-modify-write on a cacheline two cores fight over — microseconds
under real contention, not the nanosecond the '~1 ms' comment assumed —
and the 1<<32-PAUSE rendezvous 'bound' is ~2 minutes on modern Intel
(PAUSE ~140 cycles). Both are now bounded by TIME measured on the TSC
itself: ~5 ms of pairwise hammering per core (Linux's check_tsc_warp
budget — ample to catch a lagging TSC) and a ~100 ms rendezvous window.
Real-PC diagnose boot (photo + OCR): the boot stick connects at
SuperSpeed on port 21 and 'device setup failed' lands in the SAME
millisecond — an instant failure, not a timeout. setupDevice reset
every port unconditionally; that is required to enable USB2 ports, but
a SuperSpeed port that trained its link is ALREADY enabled (xHCI
advances USB3 ports to Enabled, no reset — spec 4.3), and driving a hot
reset into the live link drops PED mid-reset on real silicon. QEMU
tolerates the spurious reset, which is why the harness never saw it.
An enabled speed>=4 port now skips the reset (a not-yet-enabled SS link
still gets one). Every setup step names its failure — port reset with
the PORTSC value, Enable Slot, device-slot exhaustion, Address Device
with its completion code — so the on-screen transcript of the next
failure identifies the exact xHCI command instead of one blanket line.
block.open's give-up window drops 60 s -> 30 s (the slowest observed
healthy chain completed at ~24 s); a machine whose stick failed setup
should not sit a further minute pretending otherwise.
The scroll path copied every pixel row up by one glyph height, READING
video memory — and VRAM reads are uncached-slow on real hardware.
Measured on the 16-core PC: ~90 seconds to bring the cores online,
almost entirely boot-transcript lines each paying a whole-screen scroll
copy. (QEMU never shows this: its 'VRAM' is host RAM.)
When the screen fills, the console now clears and restarts at the top —
writes only, once per screenful. The transcript reads the same as it
streams; only the scrollback illusion is gone, which a boot console
never needed.
The display service claiming the framebuffer suppresses the on-screen
boot transcript — correctly in normal operation, but on a serial-less
machine being debugged, the timeline vanishes just when it matters. A
diagnose image (zig build -Ddiagnose=true) has init skip the display
service and demo: the timestamped transcript stays on screen
indefinitely, and the power button still runs the orderly shutdown (so
the logger's files land when storage works).
First use immediately caught a real bug IN QEMU: an intermittent (~1
in 3) usb-storage READ CAPACITY failure after a ~21 s stall — after
which usb-storage and fat both exit cleanly and nothing retries: one
transient early-boot USB failure leaves the system permanently without
storage (and therefore without logs). That no-retry policy is a prime
suspect for real hardware never mounting /var, and is Track B's first
work item.
Without serial and without working USB storage, a slow real-hardware
boot is undiagnosable — 'stabbing in the dark'. Two changes end that:
The log renderer stamps every line with boot-relative seconds
([ 12.045] ...), so every surface — serial, debugcon, and now the
screen — is a readable timeline. And the framebuffer console registers
as an ordinary log sink at boot: kernel AND userspace lines (device
bring-up, fat mounts, logger announcements) show live on screen until
the display service claims the framebuffer, which flips the console's
suppression and silences the sink automatically — the display-owns-the-
screen design is unchanged in normal operation; the console now simply
narrates the part of boot that happens before there IS a display.
On the machine that motivated this, the next boot will show by eye
where the minutes go — including whether the USB chain ever brings
storage up, and whether screen drawing itself crawls (the latent
non-write-combining framebuffer suspect: if these very lines paint
slowly, that's the answer).
Real-firmware finding: the per-file /system tree walk boots in seconds
under OVMF but stalls for MINUTES on real firmware — the cost is not
bytes (USB 3 moves the ~4 MB instantly) but firmware filesystem
OPERATIONS: ~30 opens, each an uncached directory-chain walk in an
unoptimized firmware FAT driver. This is why every real OS loader
(winload, GRUB) reads many files through its own filesystem code over
Block I/O rather than the firmware's file protocol.
The loader now reads boot/system.img — the bundled binaries packed into
ONE v2 initial_ramdisk (tools/pack-system-image.py, derived from the
same bundled list in the same build graph, so tree and capsule cannot
drift) — with a single open + sequential read, the one firmware file
I/O shape that is fast everywhere. The manifest (open each listed path
by name) and the tree walk remain as fallbacks, so a hand-assembled
stick without the capsule still boots. The running system is identical
in all three cases: the kernel receives the same in-RAM table.
The load phase now brackets itself with unconditional on-screen
breadcrumbs ('EFI: loading the system...' / '...starting the kernel'),
because this phase stalling behind a silent black screen — kernel
status is serial-only by design — already cost a real-hardware
debugging session.
Direction (settled with the user): this capsule becomes the BOOTSTRAP
capsule — kernel + init + the storage-bring-up set — once a
spawn-from-memory syscall lets init and the device manager load
everything else from the stick's real file tree at runtime through
danos's own storage stack: file-granular updates (rebuild one binary,
copy one file), the initramfs shape.
The loader ENUMERATES /system now, so it sees whatever the stick's
directory entries literally store — and a hand-copied stick differs
from our generated image: firmware returns bare 8.3 short entries
UPPERCASE (INIT, SYSTEM), and host OSes leave litter next to every file
(macOS '._' AppleDouble forks, .fseventsd). Verified in QEMU/OVMF: an
uppercase-stored volume booted to a dead kernel-only system before this
change and boots fully (display up, logger writing /var/log) after.
The walk now lowers ASCII names (the danos tree is canonically
lowercase; FAT lookups are case-insensitive by definition), skips any
dot-prefixed entry, and treats malformed or unreadable entries as
skip-this-file instead of abort-the-whole-walk. Reader.find compares
case-insensitively as belt and braces.
Per docs/coding-standards.md (no Unix-abbreviation exception): syscalls
shared_memory_create/map/physical, kernel SharedMemoryObject + handlers,
runtime.shared_memory (library/runtime/shared-memory.zig), the
shared-memory-server/-client test services, the shared-memory QEMU case,
and docs incl. vdso.md's danos_shared_memory_*. 87/87 QEMU tests pass.
Every process now logs through std.log into a kernel-stamped record
ring, and the logger service persists one file per binary path under
/var/log/<boot-stamp>/ on the flash volume — the real-hardware capture
path (no serial needed). Supporting architecture: the boot medium's
/system tree replaces the packed ramdisk (the EFI loader walks it),
task names are binary paths, FAT creates long file names with a fast
cluster allocator, and the VFS root moved into the kernel
(fs_resolve/fs_node/fs_mount/fs_unmount; resolve + redirect — the
kernel names, userspace filesystems serve). The userspace vfs server
is retired. Full QEMU suite green (88 cases).
logging.md rewritten around the pipeline (std.log -> leveled debug_write
-> tagged ring -> logger service -> /var/log/<boot-stamp>/<binary-path>.log),
why the buffer is a kernel ring rather than a logging server (the
storage stack must log; early boot needs the buffer anyway), the
announce-once and counted-loss disciplines, and the accepted gaps.
vfs-protocol.md: the router is the kernel (fs_resolve names, backends
serve data); endpoint comes from resolve, not a registry lookup; mount/
unmount retired from the wire; the rewrite-prefix mount semantics.
vdso.md: klog_status + the fs naming calls join the future table; the
no-file-I/O line sharpened (kernel resolves names, never blocks on a
filesystem). syscall.md: the placeholder status blurb replaced with the
real call families.
runtime.fs now routes every path through fs_resolve: kernel-served
/system nodes are read via fs_node (tokens, no open state); everything
under a userspace mount goes straight to the owning backend's endpoint
with the kernel-rewritten mount-relative path — one syscall of naming,
then the unchanged vfs-protocol rendezvous, public API untouched. mkdir/
unlink/rename resolve-then-forward (rename checks both paths land on
the SAME backend); mount is the fs_mount syscall.
The fat server mounts twice — /mnt/usb from the volume root and /var
from its /var subtree — so the logger now writes the FHS path
/var/log/<boot-stamp>/... and swapping the persistent medium later
touches only fat's two mount calls. With clients holding fat's node ids
directly, fat records each handle's owner, checks it, and sweeps a dead
client's handles via the published exit events (the old router's
pattern, now where the state actually lives).
The userspace vfs server and its router die; ServiceId.vfs=1 stays
reserved-retired; protocol.zig moves to system/vfs-protocol.zig (the
wire contract is backend-only now). vfs-test becomes the ring-3 proof
of the kernel VFS (own-binary ELF magic through /system, read-only
refusals, listing); vfs-client-death becomes the fat sweep test over
the full storage chain, with a ring-scanning check (the last-write
buffer is too racy under a chattering tree).
system/kernel/vfs.zig is the resolve+redirect router: fs_resolve (#46)
walks the kernel mount table; a path under the kernel-backed /system
mount (the initrd, seeded by setInitialRamdisk with a derived directory
table) yields a permanent stateless node token served by fs_node (#47)
— read/status/readdir with copy-out, initrd reads lock-free — while a
path under a userspace mount yields the backend's endpoint (installed
in the caller's table, DEDUPLICATED so 16 slots can't be exhausted by
repeated resolves) plus the rewritten mount-relative path; the caller
then speaks the unchanged vfs-protocol rendezvous directly. The kernel
never blocks on a userspace filesystem, holds no open-file state, and
refuses create-intent on the immutable /system.
fs_mount (#48) is the syscall form of the old router's op-6 cap-pass
(possession of the backend handle is the capability; an optional
rewrite prefix maps the mount into the backend's namespace — how /var
will reach the flash volume); fs_unmount (#49) removes one. A dead
backend's mount clears lazily on resolve.
Dormant this milestone: the userspace vfs still serves runtime.fs
unchanged; the kvfs QEMU case covers the kernel side (resolution, ELF
magic read-through, /system listing, read-only + unknown refusals)
until the M-G cutover exercises the syscalls end-to-end.
The logger service drains the tagged ring every 250 ms and demultiplexes
it into one file per process on the flash volume:
/mnt/usb/var/log/2026-07-21T150434Z/system/services/fat.log
[ 0.214] mounted FAT (fat32, 128992 clusters, partition lba 0)
The boot stamp is the wall-clock anchor from klog_status (FAT-safe, no
colons); the kernel's records go to kernel.log; each line carries the
record's monotonic timestamp and level. Storage is best-effort and
late — the ring buffers a whole boot until the mount appears, then the
first drain writes the backlog, storage-stack records included. Lost
records surface as '-- N records lost --' from sequence gaps. Files
close (= fat's device cache flush) after a 2 s quiet period, bounding
data-at-risk without per-record flush thrash. The logger announces
itself once — a periodic status line would feed the stream it drains.
init spawns the logger last, so the reverse-order shutdown stops it
first and its final drain runs over a live storage chain; log-flush and
init's own DANOS.LOG shutdown flush retire (superseded). runtime.fs
makePath treats components at or above a mount point as router names —
create is best-effort per prefix, the final verdict is exists(path).
createFile/createDirectory now build long-name chains: a mangled STEM~N
8.3 alias (collision-checked per directory), the standard rotate-add
checksum, and 13-UCS-2-per-entry pieces written last-logical-first into
a contiguous free-slot run (found sector-wise, growing the directory as
today). Write order is chain first, 8.3 entry last, so an interrupted
create leaves only skippable orphans. Uppercase-compliant 8.3 names
keep the bare-entry fast path; lowercase names now get a chain so their
exact case survives — matching tools/make-fat-image.py. rename stays
8.3-only (documented; nothing needs more yet).
allocateCluster drops its from-cluster-2 rescan (measured ~1 s/cluster
on a part-full volume, a 37 s shutdown flush in the lost M19 build):
a next-free hint (rewound by frees) plus a FAT-sector LBA cache turn
the scan into one device read per FAT sector.
mkdir now refuses an existing name (no duplicate entries), and
runtime.fs gains makePath (mkdir -p) for the logger's nested per-boot
directories. Engine tests cover the log-directory shape, ~N collisions,
chain unlink/reuse, the 8.3 fast path, and the checksum.
tests.zig wrote markers straight to serial, racing user-process records
rendered on other cores — visible as 16-byte UART-FIFO interleave once
the tagged renderer emitted several writes per record. Markers now go
through kernel log print (same serial sink, now under the log lock), the
renderer composes each line into one buffer and hits each sink once, and
the vfs-client-death needle drops the old self-written 'vfs: ' prefix.
library/runtime/log.zig wires std.log to the tagged ring: the root shim
installs std_options for every binary (programs may override), logFn
formats one line per record and emits it with its level via
debug_write — the payload no longer carries the process's name; the
kernel stamps identity structurally and the serial renderer prints the
'<binary path>: ' prefix, so the transcript keeps its shape.
Migrate every writeLine/logLine/log helper family (init, vfs, fat,
device-manager, acpi, pci-bus, ps2-bus x3, usb-hid x2, usb-storage,
usb-xhci-bus, virtio-gpu — 104 call sites) to std.log.info, dropping
the hand-written prefixes. A leveled record is a complete line by
contract (raw emissions may still build lines from pieces). Test
fixtures and the display/input services keep raw writes for now — their
ring records are attributed by the kernel regardless.
Harness regexes follow the renamed prefixes (usb-hid-keyboard,
discovery) and path-named restart lines.
Replace the linear keep-earliest RAM buffer with a 512 KiB ring of
framed records (log-ring.zig, host-tested): every debug_write becomes
one record per payload line, stamped by the kernel with the sender's
pid, task name (its binary path), level, per-boot sequence number, and
monotonic timestamp. Attribution is structural — a payload cannot forge
another sender's tag, and newline injection lands inside the forger's
own next record. Oldest records are overwritten when full; sequence
gaps make the loss countable.
debug_write gains a level argument (err/warn/info/debug/raw; old
two-arg callers clamp to raw). klog_read becomes a stream-offset read
that fails once the cursor falls behind the ring's tail; the new
klog_status (#45) returns the cursors plus the boot wall-clock anchor —
what the logger service will name per-boot log directories with.
The log now guards itself with a dedicated spinlock (BKL -> log lock
order, never the reverse); panic paths use a bounded try-acquire and
fall back to sinks-only. Serial rendering keeps the historical
transcript byte-identical for kernel and legacy raw output; leveled
records get a kernel-rendered name prefix. log-flush/init's interim
drains start at the ring tail and write framed records until the logger
service replaces them.
processRunning compared literal names against task names that are now
full binary paths; the acpi-ps2/usb-report harness regexes assumed
unprefixed driver names in device-manager spawn/restart lines.
The EFI loader now ENUMERATES /system rather than opening files by name,
so the on-disk name must be exact, not merely case-insensitively
findable. make-fat-image.py stored 8.3-fitting lowercase names as bare
uppercase short entries ('init' -> INIT), garbling the ramdisk paths;
now any name whose case the 8.3 entry cannot reproduce gets a long-name
chain carrying the exact name.
device-manager's driver table stored names in 24 bytes — silently
truncating '/system/drivers/usb-xhci-bus' and failing the spawn; widen
to 64 (= abi.maximum_process_name). The usb-report harness regex learns
that restart lines name drivers by path.
Retire the build-time ramdisk packer and the packed initial-ramdisk.img.
make-fat-image.py now lays every user binary out at its FHS path on the
boot volume (system/services, system/drivers, system/tests), and the EFI
loader walks \system at boot, packing what it finds into an in-RAM v2
initial_ramdisk whose entry names are full FHS paths. init rides the
table like every other binary: its dedicated handoff fields are gone and
the kernel spawns PID 1 via the same lookup as everyone else
(process.spawnBundled).
system_spawn resolves names by exact path first, then unique basename,
and normalizes argv[0] to the stored path — so task names (and, next,
the tagged log ring's attribution) are honest binary paths everywhere.
initrd v2 rejects the old magic so a stale image fails loudly.
Groundwork for per-process logging (/var/log/<boot-stamp>/<binary-path>.log)
and the kernel-VFS /system mount.
Both EDID moments the system has are now captured and carried to the
compositor's frame clock:
- EFI: the loader derives refresh from the preferred detailed timing
(pixel clock / total pixels) while GOP is still alive — the only moment
it is readable — and hands it through the boot handoff into the
display0 node's DisplayInfo (new refresh_hz field, 0 = unknown).
- GPU: the virtio-gpu driver derives the same figure from its own EDID
read and carries it in the attach_scanout announce (request.y).
updateFrameClock() re-derives the interval from the active backend's
info at bring-up and again on every backend change — the boot
framebuffer's clock dies with the GOP floor at upgrade, replaced by the
GPU's rate. Unknown rate defaults to 60 Hz; the result is clamped to
[30, 120] Hz so a mis-parsed EDID can neither starve nor flood the
compositor. Rate only, never phase: without vblank, presents still
free-run (docs/display-v2.md, 'Fenced is not vsync').
Observed in QEMU: OVMF exposes no EDID for the VGA adapter, so the GOP
floor logs 'frame clock 62 Hz (default)' (real firmware does expose it);
the virtio-gpu EDID advertises 75 Hz and the upgrade logs 'frame clock
76 Hz (panel EDID)'. The display kernel test asserts refresh_hz rides
the seeded node; all 7 display QEMU cases pass.
Client 'present' requests and cursor pokes no longer repaint on the spot:
they accumulate damage and arm a one-shot 16 ms timer, and the tick
composites everything pending as one frame. A fast mouse previously
turned every input event into a full present (100+/s); now any number of
draws and moves inside one interval coalesce into a single repaint.
No backend has a real vblank to pace by (docs/display-v2.md, 'Fenced is
not vsync'), so this is the software stand-in — the same strategy Linux
uses atop virtio-gpu. Bring-up paths that need pixels synchronously
(initialise, self-checks) still present directly.
onNotification now handles the message and timer badge bits
independently: one coalesced badge can carry both, and the old
either/or dispatch would have dropped a tick.
All six display QEMU cases pass.
The virtio-gpu present fence completes when the device has consumed the
frame: real completion feedback, and tear-freedom by snapshot semantics.
It is not a vblank — base virtio-gpu 2D has no display-refresh event at
all (Linux fakes one with a timer), so nothing paces presents to the
monitor. The code and docs claimed vsync anyway; now they don't.
- backend.hasVsync -> hasFencedPresent, with an honest doc comment
- marker 'display: vsync present ok' -> 'display: fenced present ok'
(display-modeset test expectation updated, passes)
- display-v2.md gains a 'Fenced is not vsync' note; the vsync claims in
both v2 docs are corrected
- true vsync arrives with a native driver's vblank IRQ, or approximated
by a compositor frame clock
Boots the usual VGA/GOP floor plus a virtio-gpu-pci adapter, so the
device-manager stack spawns the driver and the compositor upgrades to the
native fenced-present backend interactively. QEMU shows one head per
adapter: the live output is the virtio-gpu console in the View menu (the
VGA head freezes at the moment of upgrade). 512M, matching display-native.
Tearing mitigation for the GOP floor, attacking the copy window from three sides:
- Damage is no longer one bounding box. Two trackers, A/B-switchable at
compile time (display.zig damage_mode): DamageList (free-form dirty rects,
overlap-merged) and TileGrid (fixed 64-px tiles, exact O(1) marking, runs
coalesced back into rects). Far-apart changes — the cursor here, an
animating layer there — no longer unite into one huge repaint.
- fillRect/composite/blitTile now work in row spans (@memset/@memcpy), so
the compiler vectorizes them and ReleaseSafe bounds checks drop to per-row.
- The back->front present streams 8-byte volatile stores (presentSpan);
Backend.present takes the rect list, so each present copies only what
changed, faster.
Host tests cover both trackers; the display QEMU cases all pass.
Two companion research snapshots on what a minimal display-only native driver
(EDID + mode-set + framebuffer scanout, no acceleration) would take as a danos
.scanout backend, and how the two vendors compare.
- nvidia-gpus.md — RTX 3060 (Ampere GA106). Display is not GSP-gated: nouveau's
ga102.c has a direct register path, and danos's GOP boot lets a driver attach to
a live, already-devinit'd display. Tier-4 effort; the register-level display code
lives in GPL nouveau while the permissive OGKM reference is the hard GSP path.
GA10x is the last NVIDIA family that keeps a register-level display path.
- intel-igpu.md — the companion, and a materially easier, lower-tier target. Intel
publishes register-level Display Engine PRMs, so a clean-room permissive driver
is viable; the DMC microcontroller is optional (power states only), scanout comes
from system RAM via the GGTT (no VRAM manager), and coreboot's libgfxinit is a
compact native reference. The catch is hardware: an iGPU may not drive the
monitor on a discrete-GPU desktop.
Sourced, cited snapshots — not implementations; each ends with a "first light"
milestone ladder framed as a danos .scanout service. Not yet linked from
docs/README.md.
The kernel enabled SSE at boot and both kernel and userspace keep live values in
XMM (LLVM emits movdqu/movaps for >=16-byte struct copies, plus floats and SIMD),
yet the kernel never saved the SSE/FPU register file anywhere — not across
switch_context, not across the syscall boundary, not across interrupts. Any value
the compiler parked in an XMM register across a kernel entry could be silently
clobbered by kernel code, or by whatever the scheduler ran while the task blocked:
a whole-kernel, timing-dependent data-corruption bug.
It was the real root cause of the "device_enumerate corruption" Heisenbug: the
display service read garbage framebuffer geometry (height=0) because findDisplay
held the 16-byte .display field live in xmm0 across the claim/mmio_map syscalls,
and a timer preemption to the busy device-manager clobbered it. The tell that it
was register-only: memory always read correct, and the bug vanished whenever an
added syscall spilled the value to the stack.
Fix: fxsave/fxrstor the register file in the asm stubs (isr_common and
syscall_entry), right after pushing the GP trap frame — before any Zig kernel code
can touch XMM — and right before the pops. rbx bridges the exact rsp across the
call to interruptDispatch: it is callee-saved, so it survives even a blocking
dispatch that context-switches away and back, and `and $-16,%rsp; sub $512,%rsp`
gives fxsave its 16-byte-aligned scratch on the kernel stack. Context-switch-time
save/restore alone is not enough — kernel code between the interrupt and switchTo
already clobbers XMM.
The commit-58927ed Gop.init workaround (copy scalar geometry fields rather than the
whole descriptor by value) is now redundant but harmless; left in place. Deferred:
a fresh task inherits the previous task's XMM (minor info-leak / nondeterminism),
and the fxsave runs on every interrupt including ring0->ring0.
pciScanTest put three [64]DeviceDescriptor arrays on the stack; at 328
bytes each that is a 66,096-byte frame, larger than the 64 KiB bootstrap
stack the boot context runs on, so the prologue overflowed the stack and
triple-faulted on entry before the test could print anything — the CPU
reset with no exception line. Reuse one descriptor buffer (frame ~21 KiB).
With the fault gone, the restart-drill checks proved flaky. They polled
process.write_buffer (which holds only the latest write-syscall message)
for the transient restarting/re-scan lines, which the concurrent
class-driver output overwrote before the starved low-priority poller could
observe them. The kernel broker count can't witness the restart either:
register is idempotent and the table has no unregister, so the count is
invariant across kill/prune/respawn.
Follow the sibling restart drills (usbReportTest/driverRestartTest): assert
the ordered drill in the harness regex over the full serial log (a
backreference requires the respawn to re-scan the same count), and keep only
race-free broker checks in the kernel — empty before the scan, populated
once it settles, never growing past N — sampled via scheduler.sleep at a
fixed cadence instead of a busy-poll.
The compositor now survives the virtio-gpu driver dying and re-attaches when device-manager
restarts it — the last piece of display v2.
Three parts:
- The driver hellos the device manager (role: bus). It never did, so the manager — which
spawns it supervised and expects a hello — was stopping it at the 3s hello deadline every
run (the gate markers just printed first). Now it is properly supervised: not stopped for
silence, and restarted on death.
- A kernel IPC fix so a call to a dead service errors instead of hanging. An endpoint records
its owner; when that task dies, its registered endpoints are marked dead (and any parked
senders woken with -EPEER), so ipc_call returns -EPEER rather than blocking on a reply that
will never come. Without this the compositor's first present after the driver died blocked
forever. General robustness — any client of any service benefits.
- The compositor re-attaches. Its .scanout calls now fail cleanly (caught), freezing the last
frame; when the restarted driver re-announces, attach_scanout detects the backend is already
virtio and logs "scanout re-attached", mapping the fresh shared surface and re-looking-up
.scanout. (The previous shm mapping leaks — no shm_unmap syscall yet — but its frames are the
dead driver's, reclaimed on exit.)
- device-manager gains a "test-scanout-restart" mode (like test-usb-restart) that kills the
virtio-gpu driver once after it hellos; the displayReattachTest kernel scenario drives it.
Gate: python3 test/qemu_test.py display-reattach — "scanout upgraded to virtio-gpu" then
"scanout re-attached", no CPU exception, passing 3/3. host tests, ipc/ipc-call/ipc-cap,
supervision, shm, display-service, display-demo, virtio-gpu, display-native, and
display-modeset all pass; default zig build clean. v2 (V1-V6) complete.
The native backend can now change resolution and presents tear-free.
Mode-setting without churn. The driver sizes its scanout resource + shared surface to the
largest mode it offers and treats a mode change as re-pointing the scanout rectangle within
that surface — so the resource, its backing, and the shared mapping never change, and the
surface's row stride (the max width) is fixed while the active width/height move. The
compositor is handed that stride in the announce and composes at it; a smaller mode just
paints the top-left rectangle. This sidesteps the surface re-share a true resolution change
would otherwise need (the service harness can't reply with a capability).
- scanout-protocol gains get_modes + set_mode; the driver offers {640x480, 800x600} and
re-points set_scanout on set_mode.
- backend.VirtioGpu carries the surface stride, exposes modes()/setMode(), and reports
canModeSet = hasVsync = true.
- runtime.display gains modes()/setMode() (display-protocol get_modes/set_mode, forwarded to
the backend) — the client-facing API.
- EDID: the driver negotiates VIRTIO_GPU_F_EDID when the device offers it, reads the monitor's
EDID, and logs its preferred mode (parsed from the first detailed timing descriptor).
- vsync: every resource_flush is fenced (VIRTIO_GPU_FLAG_FENCE); the device signals the fence
when the frame is on screen, which the used-ring ack the synchronous present already waits
on gates — so a completed present is a tear-free one.
After the native upgrade the compositor runs a one-shot mode-set self-check: query the modes,
switch to a different one, re-composite, and confirm the backend reports the new geometry —
the gate's markers.
Gate: python3 test/qemu_test.py display-modeset (reuses the display-native boot) — "display:
mode set to 800x600, verified" + "display: vsync present ok", passing 3/3. host tests,
display-service, display-demo, shm, virtio-gpu, and display-native still pass.
The compositor now boots on the GOP framebuffer and upgrades to the virtio-gpu driver
the moment it announces itself — the pluggable-scanout payoff.
The shared surface. The scanout resource is an shm region the driver creates
(shm_physical, a new syscall, hands it the guest-physical for attach_backing) and passes
to the compositor as a capability. The compositor maps it and composites straight into
it: on x86 DMA is cache-coherent, so the cacheable shared pages the CPU paints are exactly
what the device transfers-and-flushes — no copy, no explicit flush.
The handshake. After bring-up the driver looks up .display and sends attach_scanout with
the geometry + the surface capability. The compositor maps the surface, looks up the
driver's .scanout endpoint itself (the driver registered it — no need to pass it), switches
to backend.VirtioGpu, and re-composites the current frame. present() over the native
backend is a present request on .scanout -> transfer-to-host + resource flush. The first
native present is deferred to a one-shot timer: presenting inline from the announce handler
would deadlock, since the driver is still blocked on our reply and not yet serving .scanout.
After it lands, the compositor reads a pixel back from the shared surface to confirm the
frame reached the device's backing.
- shm_physical (syscall 36) + runtime.shm.physical.
- scanout-protocol (the compositor->driver present channel), separate from the
client-facing display protocol; the display protocol gains attach_scanout.
- backend.VirtioGpu joins backend.Gop in the tagged union; select() still boots GOP.
- the virtio-gpu driver's scanout backing is now shm (was DMA); it announces + serves
.scanout present requests (transfer-to-host + flush of the shared surface).
Also fixes a latent framebuffer-geometry corruption the display service hit only when it
enumerated the device tree alongside a busy device-manager: Gop.init now captures the
geometry into a small value the instant device_enumerate returns (rather than re-reading
the 328-byte descriptor across the later claim/mmio_map syscalls) and retries on a zero
geometry. The underlying device-table clobber is a separate kernel bug, tracked apart.
Gate: python3 test/qemu_test.py display-native (QEMU -device virtio-gpu-pci) — "display:
scanout upgraded to virtio-gpu" + "display: native present verified" + "display-demo: ok",
passing 3/3. host tests, display-service, display-demo, shm, and virtio-gpu still pass.
The first native scanout backend's driver half. The device manager matches the
virtio-gpu PCI function by its Display/Other class triple and spawns the driver,
which claims the device, confirms vendor 0x1AF4/device 0x1050 from config space,
enables memory-space + bus mastering, and walks the virtio vendor capabilities to
find the common-config and notify structures in its BAR.
From there it is the standard modern-virtio bring-up: reset, negotiate VERSION_1,
stand up the control virtqueue in coherent DMA, then drive the GPU end to end —
RESOURCE_CREATE_2D, ATTACH_BACKING (a coherent DMA buffer; V4 swaps in the shm-
shared surface), SET_SCANOUT, paint a known pattern, TRANSFER_TO_HOST_2D,
RESOURCE_FLUSH, and wait for the device's used-ring ack. Reading the backing back
proves it is CPU-visible RAM; the ack proves the device consumed the frame —
together the automated stand-in for "it's on screen", no screenshot.
- system/drivers/virtio-gpu/: the driver, plus virtio-gpu-protocol.zig (control
commands) and virtio-pci.zig (the 1.0 PCI transport + split-virtqueue), both with
host-tested struct sizes.
- device-manager matches the display/other class triple to "virtio-gpu"; the driver
self-confirms the vendor/device id, since the class alone cannot distinguish it.
- ServiceId.scanout (11): the driver registers it so the compositor finds it in V4.
Gate: python3 test/qemu_test.py virtio-gpu (QEMU -device virtio-gpu-pci) — the
device-manager stack discovers the function, the driver brings up a 640x480 scanout
and flushes a test pattern: "virtio-gpu: scanout 640x480 online" + "flush acked,
pixel check ok". host tests, display-service, shm, and device-list still pass.
Note: the pre-existing pci-scan case triple-faults on main (verified at 88ad432,
before this change); it is unrelated and tracked separately.
Generalize capability passing from endpoints to memory objects. The per-task
handle table now holds kind-tagged entries (scheduler.HandleObject{kind, ptr});
closeHandles and shareCapability dispatch by kind, so a shared-memory object
rides an ipc_call send_cap exactly like an endpoint and is refcount-freed only
when its last capability drops.
- shm_create(len) -> vaddr, handle: contiguous, zeroed, cacheable frames wrapped
in a refcounted ShmObject, mapped into the caller's shm arena (PML4[230]).
- shm_map(cap) -> vaddr: map the same physical pages into a receiver that got the
capability. mapUserSharedInto maps WB-cacheable + device_grant, so a sharer's
teardown never frees the shared frames — the object owns them.
- runtime.shm: create(len) -> Region{ptr, handle, len}, map(handle) -> ptr.
Gate: qemu_test.py shm — shm-client creates a region, writes a pattern, passes
its capability to shm-server, which maps it and reads the same bytes back
(shm: shared 4096 bytes ok). ipc/ipc-call/ipc-cap/supervision/dma/usermem/
display-service and host tests all still pass — the handle change broke no IPC.
Extract scanout from the compositor into backend.zig — a `Backend` tagged union
with info()/surface()/present(damage) and canModeSet/hasVsync flags. The v1 GOP
path becomes `backend.Gop` (claim the display node, WC-map the LFB, keep the
cacheable back buffer, present = the damage-rect WC copy); display.zig now
composes into backend.surface() and calls backend.present(damage), with no LFB or
framebuffer geometry left in the compositor core. The selection decision is the
pure chooseKind(native_available), split from the syscall-bound bring-up, ready
for the native-if-present branch at V4.
Pure refactor: display-service, display-demo, and zig build test all pass
unchanged.
Rewrite V3/V4/V5 gates so none need a screenshot: the driver/compositor read
their own pixels back (the scanout resource is shm-backed CPU-visible RAM), and a
virtio resource_flush is confirmed by the device's used-ring ack / fence. Pixel
readback + flush-ack is the serial stand-in for "it's on screen," so the whole
V1→V6 plan can run and self-verify without a human eyeballing QEMU.
Keep the GOP framebuffer as the floor, make scanout a pluggable backend, and
upgrade to a native virtio-gpu driver when it announces itself (dynamic
hot-attach; GOP stays the fallback for "no driver ever"). v2 builds the shm
cross-process memory capability, shared with the future client-surface path.
Milestones V1 (backend seam) → V6 (resilience + tests), each with a gate.
init supervises its boot services (spawned against an exit endpoint) but the
child-exit handler was `if (got.isNotification()) continue;` — it silently
dropped a dead service. Now init restarts it: on a child-exit notification it
finds the service, and unless it exited cleanly (chose to stop) or has hit the
crash-loop cap (maximum_restarts), respawns it and logs the death + reason. The
reincarnation half of resilience (docs/resilience.md) at the service level, the
counterpart to the device manager's driver restarts. A `shutting_down` flag
skips restarts during the orderly stop sequence, whose child deaths are expected.
Two gaps a real-hardware crash exposed, both in onException's terminal path (and
the panic path):
- The report was anonymous. Add the faulting task's id + name and whether it
trapped in ring 3 (a user process) or ring 0 (the trusted base) — so a fatal
fault says WHAT crashed and WHERE, not just the vector. scheduler gains
currentIdSafe/currentNameSafe (early-boot-guarded, like currentCpuIndex, so the
reporter can't fault a second time).
- halt() never released the big kernel lock, so a core that died holding it
deadlocked every other core spinning in acquire() — the whole machine hangs,
not just the one core the design promises. The BKL now records its owner
(architecture.cpuLocal(), a unique per-core token); sync.releaseIfHeldHere()
frees the lock only if this core holds it, called before halt on both fatal
paths. Caveat: if we held it mid-mutation the shared state may be inconsistent,
but letting the other cores + the supervisor keep running is strictly more
recoverable than a guaranteed total hang.
Spawn the display-demo client alongside the compositor so a normal boot shows
the moving scene (wallpaper + sliding rectangle + cursor) — the GUI track's
visible payoff. A demo fixture: drop it from boot_services to boot to a bare
compositor.
Now that the user-space display service owns the framebuffer, the bootstrap
console shrinks to fatal-only. status/statusPrint go to the diagnostic log
alone, so routine boot output no longer scribbles on a screen the compositor is
about to paint — and a driver's recoverable fault report stays off it too. A new
fatal/fatalPrint keeps panics and kernel-mode faults on screen, forcing the
console back on so a dying machine's last words show even over a live display.
console.zig now documents its early-boot + fatal-fallback role.
A user-space display service: owns the write-combining framebuffer, composites a
z-ordered layer stack into a cacheable back buffer, presents only the damaged
region, and is driven over IPC by runtime.display. Proven end to end by the
display-demo client. Kernel changes: a display device node + write-combining
mmio_map, and a page-by-page mmap that lifts the 1 MiB per-call cap. Deferred by
design: shared-memory client surfaces, a native mode-setting backend, and vsync.
The three integration cases (display, display-service, display-demo) plus the
pure host tests all pass; the default build is clean. Update docs/display.md's
"Verifying it" to name the real cases, and mark docs/display-plan.md D1-D5 done.
The display service v1 is complete: a framebuffer compositor that owns the
write-combining framebuffer, composites a z-ordered layer stack into a cacheable
back buffer, presents only the damaged region, and is driven over IPC by the
runtime.display client — proven end to end by the display-demo process. Deferred
by design (docs/display.md): runtime mode-setting and true vsync.
Drive the compositor from a separate process, proving the pipeline end to end.
- runtime.display: a Layer handle (fill / blitTile / configure / damage /
destroy), createLayer, and a color(r,g,b) helper that caches the mode and
packs via protocol.pack. Coordinates are signed over the u32 wire fields
(@bitCast both ways), so a layer may sit or move partly off-screen.
- system/services/display-demo: the input-source analog for the compositor — a
full-screen wallpaper, a rectangle it slides back and forth (moved by
configure each frame, so the damage-driven present repaints old + new), and a
cursor. Presents in a loop paced by runtime.time. Wired into build + initrd.
Fix this surfaced: protocol.message_maximum was 4096, but the kernel caps every
IPC message at MESSAGE_MAXIMUM = 256, so replyWait rejected the oversized receive
buffer with -E2BIG and the serve loop had been spinning since D2 (invisibly, as
those gates matched init-time heartbeats). Set it to 256; blit_tile is now
explicitly a small-tile path (larger bitmaps are the deferred shm surface).
Gate: `python3 test/qemu_test.py display-demo` — the demo drives frames of
motion through the layer client API and logs `display-demo: ok`. Regression:
zig build test, display (D1), display-service (D2/D3), and default zig build.
Turn the service into a real compositor. A layer is a server-owned surface (its
own mmap'd cacheable buffer) with a screen position, z-order, and visibility.
Clients create layers, draw into them by command, mark damage, and present; the
compositor repaints only the damaged region — clear to the wallpaper, paint the
visible layers bottom-to-top (z-sorted), flush that rectangle back -> front (WC).
- compositor.zig: the pure, host-tested core — Rect (intersect/unite), Surface,
fillRect, composite (opaque, clipped to a damage rect), blitTile (unaligned-
safe read of a client tile). No syscall/runtime dependency.
- protocol.zig: pack(format, r, g, b) — native pixel encoding for rgbx/bgrx, the
shared colour vocabulary of client and server. Host-tested.
- display.zig: the layer table + create/configure/destroy/fill_rect/blit_tile/
damage/present ops wired onto the compositor, plus a damage-accumulating present.
- Startup self-check: two overlapping layers composited on the real framebuffer,
read back to confirm the overlap shows the top layer and outside shows the
bottom — logs `display: compositor self-check ok`.
Gate: `zig build test` green (compositor + pack), and the display-service case's
self-check passes on hardware. Both new pure modules added to the test loop.
Stand up /system/services/display: a ring-3 process that claims the framebuffer
D1 seeded, maps it write-combining as the front buffer, allocates a cacheable
back buffer, and presents composed frames. The GUI track's compositor, reached
by name over ServiceId.display (= 9).
- protocol.zig: the display wire protocol (info/create_layer/configure_layer/
destroy_layer/fill_rect/blit_tile/damage/present). `info` and a whole-screen
`present` are live; the layer ops fail-stub until D3.
- display.zig: enumerate -> claim -> mmio_map(WC) the LFB, mmap a cacheable back
buffer, clear it and present it (proving the double-buffer path), then serve.
- runtime.display + barrel exports (display, display_protocol): a cached
`.display` client with info()/present(), the runtime.block shape.
- init spawns "display" in boot_services; build.zig wires the protocol onto the
runtime, builds the exe, packs it into the initial-ramdisk, installs it.
mmap fix the back buffer forced: systemMmap was capped at 256 pages (1 MiB) by a
fixed kernel-stack scratch array. Rewrote it to map page-by-page with rollback
(no array) and raised the cap to 8192 pages (32 MiB) — enough for a 4K back
buffer. A real limitation met.
Gate: `python3 test/qemu_test.py display-service` matches the service's own
serial heartbeats (display: online WxH / presented frame 0), printed only after
the full claim -> WC-map -> back-buffer -> present chain. Regression-checked
usermem, heap, init, and D1's display.
Kick off the display service track (docs/display.md, docs/display-plan.md): a
user-space compositor that owns the framebuffer. GOP and the PCI display device
are two views of one controller; GOP dies at ExitBootServices, so the portable
base is the boot-handoff linear framebuffer.
D1 makes that framebuffer reachable from user space over the existing device
claim/mmio_map path rather than a bespoke syscall:
- device-abi: a `display` DeviceClass, a DisplayInfo{w,h,pitch,format} on the
descriptor, and a flags field on resources with a write-combining bit.
- devices-broker: seedDisplay() publishes the loader's framebuffer as a
root-level `display` node (one WC-flagged memory resource); kmain seeds it
after discovery. displayDevice()/displayClaimed() track the claim.
- paging/mmio_map: mapUserDeviceInto gains a write_combining bool — a WC-flagged
resource maps through PAT entry 4 instead of strong-uncacheable (an
uncacheable framebuffer blit is glacial).
- console: falls silent while a display service holds the framebuffer, and is
forced back on by the panic/exception paths.
Gate: the `display` kernel test asserts the seeded node's shape and that the
claim + mmio_map leaf is genuinely write-combining (PAT bit set, PCD/PWT clear).
Regression-checked discovery/ioport/claim-release/supervision/device-list/
device-manager with the +1 device in the table.
init writes /mnt/usb/DANOS.LOG at shutdown and then enters S5 — but the write sat in the USB flash controller's write cache and was lost when power was cut, because nothing issued SCSI SYNCHRONIZE CACHE. Invisible in QEMU (its backing file commits immediately); real on hardware. The boot-time flush survived only because the machine kept running afterward and the cache drained on its own.
- block protocol gains a flush op; usb-storage serves it with SYNCHRONIZE CACHE (10); runtime.block gains Device.flush()
- the FAT server tracks whether blocks were written and, on a file close, commits the device cache (durable-on-close — the right default for removable media, and it makes init's existing shutdown close() persist the log before S5, no init/VFS change needed)
- verified the SYNCHRONIZE CACHE actually reaches the driver on each dirty close; usb-storage/fat-mount/mutations/rename/mtime/log-flush all green
Kernel discovery interpreted the whole DSDT/SSDTs (~0.5 MB -> ~9700 nodes) solely to extract the _S5 sleep type for a kernel-side soft-off — ~1-2s of work on the single-core, pre-scheduler critical path, with nothing to overlap it. The ring-3 acpi service already parses the same blobs and owns S5 end-to-end (reads pm1a_cnt from the FADT, writes SLP_TYP itself; orderly-shutdown tests it). So drop the kernel parse entirely.
- all *static*-table parsing stays (MADT/HPET/FADT/MCFG): CPUs, timers, PCIe, and the power register map are still detected from ACPI, not legacy/compat addresses (timer still calibrates via HPET/PM-timer/CPUID, PIT only as last resort)
- kernel keeps reboot (FADT reset register + legacy fallbacks — no AML); soft-off is userspace-only now
- removed PowerInformation.s5/s3, the kernel AML namespace, aml_stats, amlDeviceCount, and the aml import; power.shutdown/enable/sleepS3 gone
- tests: poweroff case retired (S5 covered by orderly-shutdown); discovery drops its S5/AML checks; acpi-parse self-verifies against a device-count floor since there's no kernel count to match
The console's one-time full-screen clear was millions of individual uncached word-writes to the GPU BAR: fine in QEMU, but on real hardware firmware MTRRs force that region uncacheable, so the clear crawls. Program PAT entry 4 to write-combining (setupPat, on the BSP and every AP) and map the framebuffer window with the PAT bit, so those writes batch into bursts.
The clear ran on the *loader's* uncached mapping because console.init happened before enablePaging. Move it to just after paging, so it uses the kernel's write-combining mapping instead. The cost: on-screen output is absent before paging (an early panic still lands in the serial/RAM log). Verified: 11 QEMU cases (incl. SMP AP-PAT, USB/FAT/ACPI) plus a screendump showing the framebuffer cleared to black with the status text rendered correctly.
The physmap (the kernel's permanent window onto all physical RAM) was built one 4 KiB page at a time: on a 64 GiB machine that is 16.7M mapPage calls and ~128 MiB of page tables (the bulk of the 'Kernel footprint' line). Map the 2 MiB-aligned interior with huge PD leaves instead — one entry per 2 MiB, no PT beneath — and only the unaligned head/tail with 4 KiB. 512x fewer entries and table frames; footprint at 8 GiB drops from ~16 MiB of tables to ~1 MiB total, and it scales.
translateIn/isExecutable now stop at a 2 MiB leaf, and descend() panics rather than walking through one (a 4 KiB map inside a huge page would corrupt RAM; the physmap and 4 KiB regions live in disjoint PML4 slots, so it can't happen — the guard just makes a bug loud). Verified: 20 QEMU cases (vmm/heap/wx/usermem/dma/ipc/smp/usb/fat/acpi/faults) green.
Serial is now a QEMU/dev aid, not a real-hardware necessity: a legacy-free board often has no live COM1, and the boot log is kept in RAM (klog) and flushed to disk. So the serial sink is compiled in only under -Dserial (default false).
- kernel.zig gates serialInit + the log sink on build_options.serial
- boot/efi.zig gates its EFI: progress breadcrumbs (con_out) via progress(); fatal-error messages stay always-on so a failed boot still explains itself
- run-x86-64 boots a serial-enabled image variant (factored addKernel/addBootImage helpers) so a dev boot always captures serial0, without baking serial into the flashable image
- test/qemu_test.py builds -Dserial=true (it asserts on serial markers)
- the loopback probe stays as a real-HW safety net for -Dserial images
On a legacy-free board COM1 is decoded but has no live UART: its LSR reads 0x00, so the transmit-holding-empty bit never sets and writeByte spun its full 100k-iteration guard on every logged byte (~15ms/byte x ~3.7k bytes to 'initialised' ~= 57s). QEMU always has a working UART, so this only bit real hardware; the boot log survived via log.ramSink.
- probe() loopback-tests the UART in init(); write() is a no-op when absent, so a dead port costs nothing per byte
- guard cut 100k -> 5k (backstop for a live-but-stalled UART only)
- serialPresent() + a boot line making the absent-UART case visible
Completes Phase 2: the FAT filesystem now stamps and reports a real modification
time, built on the Phase 2d(i) kernel wall-clock. This is the last stat field the
compiler's build cache needs to reason about (source vs cached output).
- on-disk.zig: fatToEpoch / epochToFatDateTime convert between the two 16-bit DOS
date/time fields and Unix epoch seconds (UTC — FAT has no timezone). Host-tested
round-trip + an absolute check (1577836800 == 2020-01-01).
- engine: a settable current_time_epoch that create/write stamp into the entry's
write (and creation) date/time; Node/Listing gained an mtime decoded from those
fields on read. Host test: a create stamps the mtime, read back through resolve
and listEntry.
- vfs protocol FileStatus + runtime.fs.Attributes gained an mtime field; the fat
server sets current_time_epoch from runtime.system.wallClock() per request and
returns mtime from stat. The flat ramfs reports 0 (it has no timestamps).
- fat-test reads the created file's mtime through stat and checks it is a real
current time, behind a new `fat-mtime` QEMU case.
Verified against the host: the guest stamped mtime 1783971676 while the host clock
was 1783971680 (boot+test lag) — the file's mtime is real current time. zig build,
zig build test (the epoch<->DOS conversions + the engine mtime test),
zig build check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations,
fat-rename, fat-mtime, vfs, vfs-client-death, log-flush, orderly-shutdown,
initial-ramdisk, smoke, wall-clock, usb-storage — all green. mode/inode remain.
Adds real (calendar) time, the foundation for filesystem timestamps. Monotonic
time (`clock`) says how long since boot; this says what time it actually is.
- cpu.zig (x86_64): readRtcUnixSeconds() reads the CMOS real-time clock (ports
0x70/0x71) — waits out an update-in-progress, reads twice until stable, handles
BCD-vs-binary and 12-vs-24-hour per status register B — and converts to Unix
epoch seconds (UTC).
- kernel/wall-clock.zig: reads the RTC once at boot and anchors it to the monotonic
clock, so a query is a cheap arithmetic offset — no per-call CMOS poll, no lock,
no SMP hazard on the shared ports. kmain calls init() once the monotonic clock is
final and logs the epoch.
- wall_clock() syscall (33) -> Unix epoch seconds, wrapped by runtime.system
.wallClock(). Wall-clock *seconds* are mechanism the kernel owns like the
monotonic clock; calendars/timezones are user-space policy (the stale comment on
systemClock that called wall-clock a "user-space service" is updated in spirit by
the new handler's doc).
- A `wall-clock` kernel test asserts the boot RTC read is a plausible current epoch.
Verified against the host: the guest read epoch 1783971244 while `date -u +%s` gave
1783971245 (one second of boot lag) — the CMOS read + epoch conversion are correct to
the second. zig build, zig build test, and smoke/clock/init are green.
Completes the Phase 2 FAT mutation set (truncate, mkdir, unlink, rename).
- engine: rename(dir, old_name, new_name) rewrites an existing entry's 8.3 name in
place within the same directory. Refuses a missing source, a non-8.3 target, or a
name that already exists; drops any long-name entries on the old file (it takes
its new 8.3 name), LFN-aware like removeFile. Cross-directory and long-name-
preserving rename are noted limitations. Host-tested (rename keeps contents;
collision, non-8.3, and missing-source are refused).
- vfs protocol: a `rename` operation whose payload is old-path, a 0x00 separator,
then new-path.
- VFS router: a forwardRename helper + a `.rename` case that requires both paths
under the same mount (cross-filesystem rename is refused) and forwards the
mount-relative old+new.
- fat server: a `.rename` handler that requires the same parent directory and calls
engine.rename.
- runtime.fs: rename(old_path, new_path).
- fat-test now renames the file it created (before removing it) and asserts the old
name is gone, behind a new `fat-rename` QEMU case.
Verified: zig build, zig build test (the engine rename unit test), zig build
check-fat-image, and a sequential QEMU sweep — fat-mount, fat-mutations, fat-rename,
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The engine gained mkdir/unlink in Phase 2a; this exposes them as first-class
filesystem operations so programs can use them.
- vfs protocol: two new path-based operations, mkdir and unlink (appended, so
existing opcodes/offsets are unchanged).
- VFS router: a forwardPath helper relays a path-based op under a mount to its
backend; the mkdir/unlink cases forward to the mounted filesystem (the flat
ramfs refuses them — it has no directories).
- fat server: mkdir -> engine.createDirectory, unlink -> engine.removeFile, each
resolving the parent via a shared splitParent helper (also used by open-create).
- runtime.fs: makeDirectory(path) and remove(path).
- fat-test now exercises the whole path — mkdir /mnt/usb/TESTDIR, create + write +
read a file inside it, then remove it — behind a new `fat-mutations` QEMU case.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — fat-mount, fat-mutations (mkdir/write/read/unlink through the mount),
vfs, vfs-client-death, log-flush, orderly-shutdown, initial-ramdisk, smoke — green.
The FAT engine could create, read, write, and grow files, but never free clusters
or make directories — so overwriting a shorter file left a stale tail (a real bug:
corrupt boot-log re-flushes, and later corrupt compiler cache/.o files). This adds
the mutation half of the engine, with the corruption fix wired all the way through.
Engine (system/services/fat/engine.zig), all host-tested:
- freeChain: return a cluster chain to the pool (bounded against a corrupt cycle) —
the shared primitive under truncate and remove.
- truncate: free the chain and zero the entry's size/first-cluster (O_TRUNC).
- createDirectory (mkdir): allocate + initialise a cluster with "." and ".." and add
the directory entry to the parent.
- removeFile (unlink): free the chain and mark the 8.3 entry plus any preceding
long-name entries deleted, so a reused slot can't inherit an orphaned long name.
Refuses directories.
- createFile now shares a common addEntry helper with createDirectory.
O_TRUNC wired end to end: a truncate open-flag (vfs protocol) that the router already
forwards; runtime.fs.OpenOptions.truncate; and fat's handleOpen calls engine.truncate
on an existing file. The boot-log flush (log-flush + init) now opens with truncate, so
a shorter log on a later boot of the same stick leaves no stale tail — closing the
caveat from the boot-log work.
mkdir/unlink are engine-complete and host-tested but not yet exposed as VFS
operations / runtime.fs methods (they are new path-based ops needing router cases);
rename and the richer stat (mtime/mode, blocked on wall-clock) remain. See
docs/zig-self-hosting.md (Phase 2).
Verified: zig build, zig build test (8 engine host tests, incl. truncate, the
overwrite-no-stale-tail regression, remove, and mkdir), zig build check-fat-image, and
a sequential QEMU sweep — fat-mount, log-flush (DANOS.LOG read back at 11804 bytes,
clean, with the truncate-based final flush), vfs, vfs-client-death, usb-storage,
orderly-shutdown, initial-ramdisk, smoke — all green.
The first step of the Zig self-hosting roadmap (docs/zig-self-hosting.md): give
danos programs a danos-native file API and remove the premature POSIX compatibility
shim. This also resolves the earlier misplacement of a full-write helper into the
compat layer — that behaviour now lives natively in runtime.fs.File.writeAll.
- library/runtime/fs.zig: the danos-native file client over the VFS (open/read/
write/writeAll/seekTo/attributes/close, directory listing, mount). Handles are
*values* — a File/Directory owns its VFS node id and byte offset — so there is no
per-process fd table or descriptor limit, unlike the POSIX fd model the shim
emulated. This is where the operations that later become std.os.danos are staged.
- Retire library/posix/ (unistd, stdio): only five call sites used it, all file
operations, all migrated to runtime.fs — fat (mount), the vfs-test and fat-test
clients, and init/log-flush (the boot-log flush). stdio was already dead.
- build.zig: drop the posix module, its addUserBinary parameter, the per-binary
import, and the ~26 call-site arguments.
- Docs: the VFS protocol's client is now runtime.fs; the docs index and
coding-standards note posix is retired and the foreign-ABI naming exception now
applies to the future std.os.danos seam; the process-lifecycle note points the
future musl layer at that same seam rather than the deleted directory.
Deferred by design (see the roadmap): the C-ABI runtime.os errno seam is built at
fork time (its shape must match std/os/danos.zig); truncate/mkdir/rename are
Phase 2; stdio-byte fds and cwd are later slices.
Verified: zig build, zig build test, zig build check-fat-image, and a sequential
QEMU sweep — vfs, vfs-client-death (the park/hold-handle path), fat-mount, log-flush,
orderly-shutdown, initial-ramdisk (log-flush silent in the bare sweep), smoke, init,
usb-storage, device-manager — all green.
A forward-looking design note on making danos a real Zig target
(-target x86_64-danos) and eventually running the compiler on it, focused on
the standard-library surface (not the editor/terminal).
The core realisation: Zig 0.16 (post-writergate) collapses an OS port to ONE
seam — std.fs is gone, everything routes through the std.Io vtable, and
std.posix is generic over a single per-OS `system` module (std.os.<tag>). So the
port is "write std.os.danos once" and the whole fs/process/Io tower lights up,
rather than reimplementing the namespaces.
Records the decisions this shapes now: build runtime.os (the seam, promoted into
a forked std/os/danos.zig later) plus a thin runtime.fs; retire the premature
library/posix shim (only 5 unistd call sites); do NOT hand-mirror the high-level
std namespaces; do NOT emulate the Linux ABI; defer musl. Covers the host/target/
self-host roles and the four-part compiler fork, a coverage table of what danos
has vs the gaps (mkdir/unlink/rename/truncate, richer stat, wall-clock, env, cwd,
entropy, stdio bytes), a phased plan (target -> read-side+retire-posix ->
fs-mutation+stat -> single-threaded self-linked compiler), and the risks
(fork rebase treadmill, -fsingle-threaded and -fno-llvm/-fno-lld being
load-bearing, the "w"-does-not-truncate corruption bug). Linked from the docs index.
On a headless or real board nothing captures serial, so the boot log — the whole
diagnostic stream — is lost at power-off. This retains it in the kernel and copies
it to the boot USB volume as /mnt/usb/DANOS.LOG, the on-disk equivalent of QEMU's
`-serial file:`. Pull the stick, read DANOS.LOG on another machine.
How it fits together:
- Kernel RAM sink (log.zig): a fixed 256 KiB in-image buffer registered as a log
sink in kmain, right after serial. Because userspace debug_write funnels through
log.write, it captures the entire stream — kernel lines and every service's
output — from the first line. Fills linearly and stops when full (earliest boot
output, the most valuable, is kept); no allocation, so it is panic-safe.
- klog_read syscall (32): copies that buffer out to a user buffer, the mirror of
debug_write — same overflow-safe user-half bounds check, kernel -> user copy,
under the kernel lock so the snapshot can't grow mid-copy. Wrapped by
runtime.system.klogRead.
- log-flush (new one-shot, in the initial-ramdisk): waits for the fat server to
mount /mnt/usb, then copies the whole log to /mnt/usb/DANOS.LOG. init spawns it
once the boot services are up (fire-and-forget; it polls the mount itself). If
no volume is mounted — no stick, or the no-VFS ramdisk sweep — it exits silently.
- init shutdown flush: init repeats the copy inline at the top of shutDown(),
BEFORE it tears down the storage services (the fat server is stopped first), so
a clean poweroff captures the fullest log while /mnt/usb is still writable.
- unistd.writeAll: loops write() past the 224-byte VFS payload cap; both flush
paths use it.
The filename is 8.3 (DANOS.LOG) at the mount root — the FAT short-name rule, and
there is no mkdir on the FAT path yet. Extend-only writes mean the two same-session
flushes never leave stale bytes (the shutdown log is a superset of the boot log);
a shorter log on a later boot of the same stick can leave a stale tail — a noted,
cosmetic limitation, not worth pulling O_TRUNC into the FAT write path for now.
Verified end to end under QEMU: a new `log-flush` case (reusing the orderly-shutdown
build) asserts both markers then S5, and DANOS.LOG is read back out of the image
afterwards (11804 bytes, containing the kernel init line, the FAT mount line, and
the boot flush marker). Regression stays green: zig build, zig build test, zig
build check-fat-image, and a sequential QEMU sweep — smoke, init, initial-ramdisk
(log-flush silent in the bare sweep), orderly-shutdown, fat-mount, usb-storage,
usb-hid, vfs, input, device-manager, process, signals, dma, fault-pf.
The system now boots off a real FAT32 filesystem on a USB mass-storage device
instead of QEMU's synthesized VVFAT drive. A new in-repo image builder formats
that filesystem from the FHS boot tree, and both QEMU call sites (the run step
and the test harness) attach it as a usb-storage device on the xHCI bus, so
every boot exercises the full USB path OVMF -> BOOTX64.efi -> kernel.
- tools/make-fat-image.py: a Python 3 stdlib-only FAT32 formatter (mirrors
tools/make-initial-ramdisk.py — no external host dependencies). It lays down
the boot sector + BPB/EBPB32, FSInfo, backup boot sector, two FATs, and the
root/subdir/file cluster chains, emitting long-name entries where a name is
not 8.3. Packs the four boot inputs (EFI/BOOT/BOOTX64.efi, system/kernel,
system/services/init, boot/initial-ramdisk.img) into their boot paths. A
--verify subcommand re-checks the 0xAA55 signature, recomputes the cluster
count -> FAT32, and resolves EFI/BOOT/BOOTX64.efi, all with no dependencies.
- build.zig: a mk_fat step builds zig-out/danos-usb.img from the four boot
artifacts (so changing -Dtest-case rebuilds the image with that kernel), a
check-fat-image step runs --verify, and run-x86-64 boots the image on a
usb-storage device (if=none,id=bootusb + usb-storage,bus=xhci.0,bootindex=0),
keeping usb-kbd/usb-mouse on the same controller.
- test/qemu_test.py: the default boot config now boots off danos-usb.img on a
usb-storage device (xHCI + usb-kbd + usb-mouse + the boot stick). The seven
per-case qemu_extra blocks that added their own qemu-xhci/usb-kbd/usb-mouse
(or a VVFAT stick) collided on id=xhci and are removed — the default provides
the bus and the boot device. usb-storage and fat-mount now exercise the real
FAT32 boot image (usb-storage reads its 0x55AA boot sector; fat mounts it at
/mnt/usb). A build_case override lets a case reuse another's kernel, used by a
new usb-boot case: an explicit, named boot-from-USB regression guard.
Verified: zig build, zig build test, and zig build check-fat-image are green
(FAT32, 128992 clusters, BOOTX64.efi present); a broad sequential QEMU sweep
passes — smoke, init, vfs, input, device-manager, usb-report, usb-hid,
usb-storage, fat-mount, device-list, driver-restart, acpi-report, iommu,
orderly-shutdown, usb-boot, dma, msi, initial-ramdisk, args, process — proving
the boot switch holds across kernel tests, the full init tree, the USB stack,
the FAT mount, and orderly shutdown.
Add a FAT12/16/32 filesystem the VFS mounts at /mnt/usb, reading and writing a
USB stick through the block device. Verified end to end under QEMU: the fat
server mounts the volume, the VFS routes /mnt/usb to it, and a client lists the
root and reads a file (the ELF magic of /mnt/usb/system/kernel).
- engine.zig: the FAT engine over a BlockDevice interface — mount (a bare FAT or,
as QEMU's VVFAT and most real sticks present it, an MBR-partitioned disk), FAT
chain walk (12/16/32), cluster allocation, directory traversal with long-name
read, and file read / write / create. Host-tested against a RAM-backed FAT16
image (create, cluster-spanning write, mid-file overwrite, read-back, list).
- on-disk.zig: the align(1) boot-sector / directory / long-name / FSInfo structs
and the cluster-count FAT-type detection.
- fat.zig: the server — wraps the .block device (a DMA bounce buffer) in a
BlockDevice, mounts the FAT, serves the vfs-protocol as a backend, and mounts
itself into the VFS at /mnt/usb. Spawned by init as a boot service.
- runtime.block: the block-device client (geometry / read / write by physical
address, so whole sectors never cross IPC).
- Raise the kernel service-name registry (maximum_services) 8 -> 16: it is
indexed directly by ServiceId, and fat = 8 was being rejected, so the fat
server exited before registering.
- VFS: an absolute path with no matching mount is now not-found rather than
silently created in the flat ramfs — so /mnt/usb fails cleanly until mounted.
Tests: fat-mount (the full stack: block -> FAT -> VFS mount -> list + file read)
passes; host units cover the engine and on-disk structs; the vfs, shutdown, and
USB regression suite stays green (10/10).
Turn the flat-ramfs VFS into a router: a mount table maps an absolute path prefix
(e.g. /mnt/usb) to a backend server's endpoint, and open/read/write/status/
readdir/close on a path under a mount are forwarded to that backend, which speaks
the same vfs-protocol. This is what a FAT filesystem mounts into.
- protocol: append readdir / mount / unmount operations, a NodeKind enum (the FSH
file types) that now fills FileStatus.kind, a DirectoryEntry record, and a
directory open flag. Appended values keep existing clients and tests unchanged.
- vfs.zig: a mount table, longest-prefix routing, forwarding of every op on a
backend handle, mount/unmount handlers (the backend arrives as the call's
capability), and release-on-death that also closes the backend's handles.
- path.zig: pure, host-tested mount-prefix matching that never captures a
non-boundary like /mnt/usbextra.
- unistd: mount(), opendir / readdir / closedir clients.
Bare names still resolve in the flat ramfs — the backward-compat contract; the
vfs and vfs-client-death tests pass unchanged. End-to-end mount+read is exercised
by the FAT server (M6). Host units cover path matching and protocol sizes.
Flesh out the xHCI host-controller driver into a full transfer engine and build
the three USB class drivers on top, all verified end to end under QEMU.
- xHCI engine (usb-xhci-library.zig): controller reset, command/event rings with
cycle-bit bookkeeping (gated on a No-Op-command proof), device slots, Address
Device, control transfers, full chapter-9 enumeration, Configure Endpoint, and
interrupt/bulk transfers. Each interface is device_registered with its
(class,subclass,protocol) identity, unique per (port,interface).
- Bus<->class transfer protocol (usb-transfer-protocol.zig + runtime.usb): open /
control / interrupt-subscribe (async report pump on a poll timer) / bulk-by-
physical-address, so sector data never crosses the 256-byte IPC limit.
- USB HID keyboard + mouse (usb-hid/): decode boot-protocol reports and publish
to the input service. A USB usage is already the input protocol's keycode.
- USB mass storage (usb-storage/): Bulk-Only Transport + transparent SCSI,
serving a block device under the new .block service id (block-protocol).
- device-manager matches USB interfaces to class drivers (usbDriverForIdentity).
- usb-abi / usb-ids made importable modules; add HID and mass-storage class
requests, packTriple, and a usb_device DeviceClass.
- Fix test/qemu_test.py on macOS: the QMP unix-socket path was built from the
deep worktree path and exceeded the 104-byte sun_path limit, so QEMU exited
before booting. It now lives under a short temp path.
Tests: usb-report, usb-hid, usb-storage pass under python3 test/qemu_test.py;
host units (usb-abi, usb-ids, hid-report, bulk-only-transport, scsi) green.
Time is a kernel concern in danos: the kernel owns the scheduling timer and
already exposes monotonic time via the clock/sleep/timer_bind syscalls, so a
userspace time service would be a redundant, slower path. This adds the generic
runtime.time module over those syscalls, retires the two demonstration drivers,
reorganizes the milestone docs, and makes the monotonic clock correct on Intel,
AMD, and inside any VM.
runtime.time (library/runtime/time.zig)
- Instant/Duration interface: now, sleep, spin, after, monotonicNanos, available
- a thin layer over system.clock/sleep/timerOnce; unit-tested arithmetic
Remove the demo drivers hpet and bus (a teaching example belongs in the docs,
not shipped in the tree)
- system/drivers/ now holds only real drivers: pci-bus, ps2-bus, usb-xhci-bus
- device-manager end-to-end test repointed to pci-bus (asserts on kernel state:
the process table and the device tree, not a racy serial marker)
- device_register containment moved to a new in-kernel `containment` test
- the driver-model worked example moved inline into docs/drivers.md
Reorganize milestone docs into topic docs
- m17-m18 / m19-m20 / m21 plans dissolved into process-lifecycle, device-manager,
discovery, and acpi docs; new docs/power.md and docs/timers.md; ~20 citations
repointed; plan docs deleted
TSC reliability (apic.zig, smp.zig, cpu.zig, kernel.zig)
- check the invariant-TSC bit (CPUID 0x80000007 EDX[8]) on Intel and AMD
- cross-core "warp" check at SMP bring-up, pairwise BSP<->AP as each core comes up
- fall back to the HPET clocksource when the TSC is not invariant (a bare VM) or
not synchronized (a warp), switched continuously so time never jumps
- boot log reports the outcome; new tsc-sync test exercises the TSC + warp path
Verified: zig build; zig build test; 60/60 QEMU cases (incl. new containment and
tsc-sync).
The QMP harness channel, the SCI + power button published from ring 3,
Notify/GPE dispatch in the AML interpreter, and orderly shutdown — init's
M17 stop cascade into a ring-3 S5 write. Proven by injecting a real ACPI
power-button event; QEMU powers off through the whole chain.
# Conflicts:
# system/services/init/init.zig
The debug-message refactor prefixed each service/driver line with its
source path (system/drivers/hpet:, ...) for readability, but two things
left main red: a 'drviers' typo in hpet.zig and pci-bus.zig, and five
kernel tests (init, hpet, pci-scan, device-manager, vfs-client-death)
that starts-with-matched the old short markers, which no longer sit at
the front of the prefixed lines.
Fix the typo, and convert the fragile starts-with matchers to substring
matching via a bufferHas helper — 'hpet: ok' now matches inside
'system/drivers/hpet: ok' regardless of prefix. Future-proof against
further prefix changes and harmless for the tests that already passed.
Suite 58/58.
The capstone. init becomes a real supervisor: it spawns its boot
services supervised against one endpoint that also carries its signals, a
re-arming heartbeat timer, and the power events it subscribes to. On the
power button (or a terminate signal — same path) it logs the shutdown,
runs the M17 stop sequence over its children in reverse spawn order
(vfs last), then asks the power service for S5.
The acpi service honors a shutdown request from a power subscriber — init
is the one subscriber, a soft gate that stands in for 'only the system
supervisor may power off' and, unlike a PID-1 check, survives the test
harness where the kernel's idle tasks take the early ids. The power
service is mechanism (write S5); deciding when to shut down and stopping
everything else first is init's policy — the microkernel split applied to
poweroff.
The orderly-shutdown scenario injects a real QMP power-button event and
watches the whole chain compose: button pressed -> init shutting down ->
entering S5 -> QEMU powers off. That single scenario proves the M17
lifecycle and the M21 event side compose into a clean shutdown. Suite
60/60.
The AML interpreter now handles the Notify opcode (0x86, previously
unhandled): it resolves the target device, evaluates the code, and
records the pair in a bounded per-evaluate queue the caller drains with
takeNotifications. A host unit test with hand-encoded AML — a method that
issues Notify(DEV_, 0x80) — proves the device and code come back; aml.zig
joins the zig build test loop so the interpreter is covered on the host.
The acpi service's SCI handler now services general-purpose events too:
for each set-and-enabled GPE bit it evaluates the \_GPE._Lxx (level) or
_Exx (edge) handler method, drains the Notify queue that produced, and
publishes a domain event per notified device — PNP0C0A battery, ACPI0003
AC, PNP0C0D lid, else generic notify — then clears the status bit and
acks. The embedded controller's _Qxx queries are out of scope (hardware
track). QEMU raises no GPEs on this config, so the QEMU suite is the
regression net (the power button still works with GPE servicing in the
path); correctness is the unit test. Suite 59/59.
Daniel Samson